diff options
| author | Francis Rowe <info@gluglug.org.uk> | 2015-05-16 13:41:07 +0100 |
|---|---|---|
| committer | Francis Rowe <info@gluglug.org.uk> | 2015-05-16 13:41:07 +0100 |
| commit | 16049cb82c0bc7fab2e7d9a35dd58c427f50cc36 (patch) | |
| tree | 2c6a552d52162394e09066e91cb4374d3bfd7874 /docs/install/bbb_setup.html | |
| parent | 58386a3231a48821ecdf7110b852f89f13059856 (diff) | |
| download | librebootfr-16049cb82c0bc7fab2e7d9a35dd58c427f50cc36.tar.gz librebootfr-16049cb82c0bc7fab2e7d9a35dd58c427f50cc36.zip | |
docs/install/bbb_setup.html: Warn user not to use the 5V ATX pins
Diffstat (limited to 'docs/install/bbb_setup.html')
| -rw-r--r-- | docs/install/bbb_setup.html | 6 |
1 files changed, 5 insertions, 1 deletions
diff --git a/docs/install/bbb_setup.html b/docs/install/bbb_setup.html index dacd2548..4ca3dc20 100644 --- a/docs/install/bbb_setup.html +++ b/docs/install/bbb_setup.html @@ -103,7 +103,11 @@ power on the PSU. </p> <p> - On newer 24-pin ATX PSUs, there is an additional 3.3V (orange) on pin 12. + <b>DO **NOT** use pin 4, 6, do **NOT** use pin 19 or 20 (on a 20-pin ATX PSU), and + DO **NOT** use pin 21, 22 or 23 (on a 24-pin ATX PSU). These are 5V, and they **WILL** + kill your flash chip. ***NEVER*** supply more than 3.3V to your flash chip. + (that is, if it's a 3.3V flash chip. 5V and 1.8V SPI flash chips do exist, but they are rare. always + check what voltage your chip takes. most take 3.3V)</b> </p> <p> You only need one 3.3V supply and one ground for the flash chip, after grounding PS_ON#. |