diff options
| author | Sebastian 'Swift Geek' Grzywna <swiftgeek@gmail.com> | 2017-04-29 18:18:52 +0200 |
|---|---|---|
| committer | Sebastian 'Swift Geek' Grzywna <swiftgeek@gmail.com> | 2017-04-29 19:01:42 +0200 |
| commit | 01b733fa07812bf510c3a8cd98b232111adfe360 (patch) | |
| tree | 81d5023c5994686e8c3a5b1acdcee7253d27152e /docs/install | |
| parent | 4e8763c53748eac3259c3daab10554669968b7e5 (diff) | |
| download | librebootfr-01b733fa07812bf510c3a8cd98b232111adfe360.tar.gz librebootfr-01b733fa07812bf510c3a8cd98b232111adfe360.zip | |
Remove stability section
link doesn't even provide mentioned info anymore,
and further part is far from reality even though
it worked in that particular instance
Diffstat (limited to 'docs/install')
| -rw-r--r-- | docs/install/bbb_setup.md | 18 |
1 files changed, 0 insertions, 18 deletions
diff --git a/docs/install/bbb_setup.md b/docs/install/bbb_setup.md index af9026b3..30e4adc7 100644 --- a/docs/install/bbb_setup.md +++ b/docs/install/bbb_setup.md @@ -327,24 +327,6 @@ leads, **but** keep all other leads short (10cm or less) You should now have something that looks like this:\   -Notes about stability {#stability} -===================== - -<http://flashrom.org/ISP> is what we typically do in libreboot, though -not always. That page has some notes about using resistors to affect -stability. Currently, we use spispeed=512 (512kHz) but it is possible to -use higher speeds while maintaining stability. - -tty0\_ in \#libreboot was able to get better flashing speeds with the -following configuration: - -- "coax" with 0.1 mm core and aluminum foley (from my kitchen), add - 100 Ohm resistors (serial) -- put heatshrink above the foley, for: CS, CLK, D0, D1 -- Twisted pair used as core (in case more capacitors are needed) -- See this image: <http://i.imgur.com/qHGxKpj.jpg> -- He was able to flash at 50MHz (lower speeds are also fine). - Copyright © 2014, 2015 Leah Rowe <info@minifree.org>\ Copyright © 2015 Patrick "P. J." McDermott <pj@pehjota.net>\ Copyright © 2015 Albin Söderqvist\ |