rename docs/hcl/ to docs/hardware/

8 files changed, 23 insertions, 23 deletions

diff --git a/docs/install/d945gclf.md b/docs/install/d945gclf.md
index ebf2dbf5..98a67e35 100644
--- a/docs/install/d945gclf.md
+++ b/docs/install/d945gclf.md
@@ -6,7 +6,7 @@ This guide is for those who want libreboot on their Intel D945GCLF
 motherboard while they still have the original BIOS present.
 
 For information about this board, go to
-[../hcl/d945gclf.html](../hcl/d945gclf.html)
+[../hardware/d945gclf.html](../hardware/d945gclf.html)
 
 Flashing instructions {#clip}
 =====================
diff --git a/docs/install/index.md b/docs/install/index.md
index bc6ab58e..02a6d4be 100644
--- a/docs/install/index.md
+++ b/docs/install/index.md
@@ -12,7 +12,7 @@ that has CONFIG\_STRICT\_DEVMEM not enabled.
 Which systems are Libreboot compatible with?
 --------------------------------------------
 
--   [Information about Libreboot hardware compatibility](../hcl/)
+-   [Information about Libreboot hardware compatibility](../hardware/)
 
 General information
 -------------------
@@ -152,7 +152,7 @@ highly recommended, in case of bricks.
 extractor. These can be found online. See
 <http://www.coreboot.org/Developer_Manual/Tools#Chip_removal_tools>**
 
-Do check the HCL entry: [../hcl/kfsn4-dre.html](../hcl/kfsn4-dre.html)
+Do check the HCL entry: [../hardware/kfsn4-dre.html](../hardware/kfsn4-dre.html)
 
 ASUS KGPE-D16?
 --------------
@@ -168,7 +168,7 @@ see link above).
 extractor. These can be found online. See
 <http://www.coreboot.org/Developer_Manual/Tools#Chip_removal_tools>**
 
-Do check the HCL entry: [../hcl/kgpe-d16.html](../hcl/kgpe-d16.html)
+Do check the HCL entry: [../hardware/kgpe-d16.html](../hardware/kgpe-d16.html)
 
 ASUS KCMA-D8?
 -------------
@@ -184,7 +184,7 @@ see link above).
 extractor. These can be found online. See
 <http://www.coreboot.org/Developer_Manual/Tools#Chip_removal_tools>**
 
-Do check the HCL entry: [../hcl/kcma-d8.html](../hcl/kcma-d8.html)
+Do check the HCL entry: [../hardware/kcma-d8.html](../hardware/kcma-d8.html)
 
 Intel D945GCLF?
 ---------------
@@ -225,7 +225,7 @@ onboard ethernet chipset is located inside the flash chip. Libreboot ROM
 images for these laptops contain a generic MAC address by default, but
 this is not what you want. *Make sure to change the MAC address inside
 the ROM image, before flashing it. The instructions on
-[../hcl/gm45\_remove\_me.html\#ich9gen](../hcl/gm45_remove_me.html#ich9gen)
+[../hardware/gm45\_remove\_me.html\#ich9gen](../hardware/gm45_remove_me.html#ich9gen)
 show how to do this.*
 
 It is important that you change the default MAC address, before
@@ -287,7 +287,7 @@ already have coreboot or libreboot running, then go to
 [\#flashrom](#flashrom) instead!**
 
 **If you are flashing a Lenovo ThinkPad T60, be sure to read
-[../hcl/\#supported\_t60\_list](../hcl/#supported_t60_list)**
+[../hardware/\#supported\_t60\_list](../hardware/#supported_t60_list)**
 
 **If you are using libreboot\_src or git, then make sure that you built
 the sources first (see [../git/\#build](../git/#build)).**
@@ -342,14 +342,14 @@ MacBook2,1: Initial installation guide (if running the proprietary firmware) {#f
 ============================================================================
 
 **If you have a MacBook1,1, refer to
-[../hcl/\#macbook11](../hcl/#macbook11) for flashing instructions.**
+[../hardware/\#macbook11](../hardware/#macbook11) for flashing instructions.**
 
 **This is for the MacBook2,1 while running Apple EFI firmware. If you
 already have coreboot or libreboot running, then go to
 [\#flashrom](#flashrom) instead!**
 
 Be sure to read the information in
-[../hcl/\#macbook21](../hcl/#macbook21).
+[../hardware/\#macbook21](../hardware/#macbook21).
 
 **Warning: this guide will not instruct the user how to backup the
 original Apple EFI firmware. For that, please refer to
diff --git a/docs/install/kcma-d8.md b/docs/install/kcma-d8.md
index bf8f3ae1..90d511fa 100644
--- a/docs/install/kcma-d8.md
+++ b/docs/install/kcma-d8.md
@@ -13,7 +13,7 @@ know how to recover.
 recommend avoiding Kingston modules.**
 
 For more general information about this board, refer to
-[../hcl/kcma-d8.html](../hcl/kcma-d8.html).
+[../hardware/kcma-d8.html](../hardware/kcma-d8.html).
 
 TODO: show photos here, and other info.
 
diff --git a/docs/install/kgpe-d16.md b/docs/install/kgpe-d16.md
index 91931fe7..efbf8ce3 100644
--- a/docs/install/kgpe-d16.md
+++ b/docs/install/kgpe-d16.md
@@ -13,7 +13,7 @@ know how to recover.
 recommend avoiding Kingston modules.**
 
 For more general information about this board, refer to
-[../hcl/kgpe-d16.html](../hcl/kgpe-d16.html).
+[../hardware/kgpe-d16.html](../hardware/kgpe-d16.html).
 
 TODO: show photos here, and other info.
 
diff --git a/docs/install/r400_external.md b/docs/install/r400_external.md
index b986f5ad..4243ba56 100644
--- a/docs/install/r400_external.md
+++ b/docs/install/r400_external.md
@@ -247,7 +247,7 @@ behaviour in the original firmware that could be replicated in coreboot
 and libreboot.
 
 Follow the instructions at
-[../hcl/gm45\_remove\_me.html\#ich9gen](../hcl/gm45_remove_me.html#ich9gen)
+[../hardware/gm45\_remove\_me.html\#ich9gen](../hardware/gm45_remove_me.html#ich9gen)
 to change the MAC address inside the libreboot ROM image, before
 flashing it. Although there is a default MAC address inside the ROM
 image, this is not what you want. **Make sure to always change the MAC
@@ -301,7 +301,7 @@ Wifi
 The R400 typically comes with an Intel wifi chipset, which does not work
 without proprietary software. For a list of wifi chipsets that work
 without proprietary software, see
-[../hcl/\#recommended\_wifi](../hcl/#recommended_wifi).
+[../hardware/\#recommended\_wifi](../hardware/#recommended_wifi).
 
 Some R400 laptops might come with an Atheros chipset, but this is
 802.11g only.
diff --git a/docs/install/t400_external.md b/docs/install/t400_external.md
index 324873ec..eebdb96c 100644
--- a/docs/install/t400_external.md
+++ b/docs/install/t400_external.md
@@ -253,7 +253,7 @@ behaviour in the original firmware that could be replicated in coreboot
 and libreboot.
 
 Follow the instructions at
-[../hcl/gm45\_remove\_me.html\#ich9gen](../hcl/gm45_remove_me.html#ich9gen)
+[../hardware/gm45\_remove\_me.html\#ich9gen](../hardware/gm45_remove_me.html#ich9gen)
 to change the MAC address inside the libreboot ROM image, before
 flashing it. Although there is a default MAC address inside the ROM
 image, this is not what you want. **Make sure to always change the MAC
@@ -307,7 +307,7 @@ Wifi
 The T400 typically comes with an Intel wifi chipset, which does not work
 without proprietary software. For a list of wifi chipsets that work
 without proprietary software, see
-[../hcl/\#recommended\_wifi](../hcl/#recommended_wifi).
+[../hardware/\#recommended\_wifi](../hardware/#recommended_wifi).
 
 Some T400 laptops might come with an Atheros chipset, but this is
 802.11g only.
diff --git a/docs/install/t500_external.md b/docs/install/t500_external.md
index 107c8698..a0b75e1c 100644
--- a/docs/install/t500_external.md
+++ b/docs/install/t500_external.md
@@ -258,7 +258,7 @@ behaviour in the original firmware that could be replicated in coreboot
 and libreboot.
 
 Follow the instructions at
-[../hcl/gm45\_remove\_me.html\#ich9gen](../hcl/gm45_remove_me.html#ich9gen)
+[../hardware/gm45\_remove\_me.html\#ich9gen](../hardware/gm45_remove_me.html#ich9gen)
 to change the MAC address inside the libreboot ROM image, before
 flashing it. Although there is a default MAC address inside the ROM
 image, this is not what you want. **Make sure to always change the MAC
@@ -312,7 +312,7 @@ Wifi
 The T500 typically comes with an Intel wifi chipset, which does not work
 without proprietary software. For a list of wifi chipsets that work
 without proprietary software, see
-[../hcl/\#recommended\_wifi](../hcl/#recommended_wifi).
+[../hardware/\#recommended\_wifi](../hardware/#recommended_wifi).
 
 Some T500 laptops might come with an Atheros chipset, but this is
 802.11g only.
diff --git a/docs/install/x200_external.md b/docs/install/x200_external.md
index e1333ec3..2bb1e850 100644
--- a/docs/install/x200_external.md
+++ b/docs/install/x200_external.md
@@ -36,7 +36,7 @@ Use this to find out:
 The X200S and X200 Tablet will use a WSON-8 flash chip, on the bottom of
 the motherboard (this requires removal of the motherboard). **Not all
 X200S/X200T are supported; see
-[../hcl/x200.html\#x200s](../hcl/x200.html#x200s).**
+[../hardware/x200.html\#x200s](../hardware/x200.html#x200s).**
 
 MAC address {#macaddress}
 ===========
@@ -101,7 +101,7 @@ The following image shows how this is done:**\
 In this image, a pin header was soldered onto the WSON. Another solution
 might be to de-solder the WSON-8 chip and put a SOIC-8 there instead.
 Check the list of SOIC-8 flash chips at
-[../hcl/gm45\_remove\_me.html\#flashchips](../hcl/gm45_remove_me.html#flashchips)
+[../hardware/gm45\_remove\_me.html\#flashchips](../hardware/gm45_remove_me.html#flashchips)
 but do note that these are only 4MiB (32Mb) chips. The only X200 SPI
 chips with 8MiB capacity are SOIC-16. For 8MiB capacity in this case,
 the X201 SOIC-8 flash chip (Macronix 25L6445E) might work.
@@ -191,7 +191,7 @@ behaviour in the original firmware that could be replicated in coreboot
 and libreboot.
 
 Follow the instructions at
-[../hcl/gm45\_remove\_me.html\#ich9gen](../hcl/gm45_remove_me.html#ich9gen)
+[../hardware/gm45\_remove\_me.html\#ich9gen](../hardware/gm45_remove_me.html#ich9gen)
 to change the MAC address inside the libreboot ROM image, before
 flashing it. Although there is a default MAC address inside the ROM
 image, this is not what you want. **Make sure to always change the MAC
@@ -228,7 +228,7 @@ Wifi
 The X200 typically comes with an Intel wifi chipset, which does not work
 without proprietary software. For a list of wifi chipsets that work
 without proprietary software, see
-[../hcl/\#recommended\_wifi](../hcl/#recommended_wifi).
+[../hardware/\#recommended\_wifi](../hardware/#recommended_wifi).
 
 Some X200 laptops come with an Atheros chipset, but this is 802.11g
 only.
@@ -286,7 +286,7 @@ starting (which itself interferes with flashing attempts). The theory
 was proven correct; however, it is still useless in practise.
 
 Look just above the 7 in TP37 (that's GPIO33):\
-![](../hcl/images/x200/gpio33_location.jpg)
+![](../hardware/images/x200/gpio33_location.jpg)
 
 By default we would see this in lenovobios, when trying flashrom -p
 internal -w rom.rom:
@@ -316,7 +316,7 @@ here:
 
 On a related note, libreboot has a utility that could help with
 investigating this:
-[../hcl/gm45\_remove\_me.html\#demefactory](../hcl/gm45_remove_me.html#demefactory)
+[../hardware/gm45\_remove\_me.html\#demefactory](../hardware/gm45_remove_me.html#demefactory)
 
 Copyright © 2014, 2015 Leah Rowe <info@minifree.org>\
 This page is available under the [CC BY SA 4.0](../cc-by-sa-4.0.txt)