Use different coreboot revisions and patches per board

The release archives will be bigger, but this is a necessary change
that makes libreboot development easier.

At present, there are boards maintained in libreboot by different
people. By doing it this way, that becomes much easier. This is in
contrast to the present situation, where a change to one board
potentially affects all other boards, especially when updating to
a new version of coreboot.

Coreboot-libre scripts, download scripts, build scripts - everything.
The entire build system has been modified to reflect this change
of development.

For reasons of consistency, cbfstool and nvramtool are no longer
included in the util archives.

1 files changed, 0 insertions, 96 deletions

diff --git a/resources/libreboot/patch/kgpe-d16/0066-src-southbridge-amd-sb700-Reset-SATA-controller-in-A.patch b/resources/libreboot/patch/kgpe-d16/0066-src-southbridge-amd-sb700-Reset-SATA-controller-in-A.patch
deleted file mode 100644
index b414899e..00000000
--- a/resources/libreboot/patch/kgpe-d16/0066-src-southbridge-amd-sb700-Reset-SATA-controller-in-A.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From f2d97b4ed0b0594b8983dbe4d551aca7f9e6a32e Mon Sep 17 00:00:00 2001
-From: Timothy Pearson <tpearson@raptorengineeringinc.com>
-Date: Sun, 21 Jun 2015 16:27:03 -0500
-Subject: [PATCH 066/143] src/southbridge/amd/sb700: Reset SATA controller in
- AHCI mode during startup
-
-In AHCI mode SeaBIOS randomly fails to detect disks (AHCI timeouts),
-with the probability of a failure increasing with the number of disks
-connected to the controller.  Resetting the SATA controller appears to
-show the true state of the underlying hardware, allowing the drive
-detection code to attempt link renegotiation as needed.
-
-Change-Id: Ib1f7c5f830a0cdba41cb6f5b05d759adee5ce369
-Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
----
- src/southbridge/amd/sb700/sata.c |   47 ++++++++++++++++++++++++++++----------
- 1 file changed, 35 insertions(+), 12 deletions(-)
-
-diff --git a/src/southbridge/amd/sb700/sata.c b/src/southbridge/amd/sb700/sata.c
-index 24f78dd..d51baa1 100644
---- a/src/southbridge/amd/sb700/sata.c
-+++ b/src/southbridge/amd/sb700/sata.c
-@@ -135,6 +135,8 @@ static void sata_init(struct device *dev)
- 	/* get rev_id */
- 	rev_id = pci_read_config8(sm_dev, 0x08) - 0x28;
- 
-+	printk(BIOS_SPEW, "rev_id=%x\n", rev_id);
-+
- 	if (sata_ahci_mode) {
- 		/* Enable link latency enhancement on A14 and above */
- 		if (rev_id >= 0x14) {
-@@ -245,6 +247,27 @@ static void sata_init(struct device *dev)
- 		write32(sata_bar5 + 0xfc, dword);
- 	}
- 
-+	if (sata_ahci_mode) {
-+		/* FIXME
-+		* SeaBIOS does not know how to spin
-+		* up the drives and therefore hangs
-+		* in AHCI init if this is enabled...
-+		*/
-+		/* Enable staggered spin-up */
-+		dword = read32(sata_bar5 + 0x00);
-+#if 0
-+		dword |= 0x1 << 27;
-+#else
-+		dword &= ~(0x1 << 27);
-+#endif
-+		write32(sata_bar5 + 0x00, dword);
-+
-+		/* Reset the HBA to avoid stuck drives in SeaBIOS */
-+		dword = read32(sata_bar5 + 0x04);
-+		dword |= 0x1;
-+		write32(sata_bar5 + 0x04, dword);
-+	}
-+
- 	/* Write protect Sub-Class Code */
- 	byte = pci_read_config8(dev, 0x40);
- 	byte &= ~(1 << 0);
-@@ -371,21 +394,21 @@ static void sata_init(struct device *dev)
- 	}
- 
- 	/* Below is CIM InitSataLateFar */
--	/* Enable interrupts from the HBA  */
--	byte = read8(sata_bar5 + 0x4);
--	byte |= 1 << 1;
--	write8((sata_bar5 + 0x4), byte);
--
- 	if (!sata_ahci_mode) {
--		/* Clear error status */
--		write32((sata_bar5 + 0x130), 0xFFFFFFFF);
--		write32((sata_bar5 + 0x1b0), 0xFFFFFFFF);
--		write32((sata_bar5 + 0x230), 0xFFFFFFFF);
--		write32((sata_bar5 + 0x2b0), 0xFFFFFFFF);
--		write32((sata_bar5 + 0x330), 0xFFFFFFFF);
--		write32((sata_bar5 + 0x3b0), 0xFFFFFFFF);
-+		/* Enable interrupts from the HBA  */
-+		byte = read8(sata_bar5 + 0x4);
-+		byte |= 1 << 1;
-+		write8((sata_bar5 + 0x4), byte);
- 	}
- 
-+	/* Clear error status */
-+	write32((sata_bar5 + 0x130), 0xFFFFFFFF);
-+	write32((sata_bar5 + 0x1b0), 0xFFFFFFFF);
-+	write32((sata_bar5 + 0x230), 0xFFFFFFFF);
-+	write32((sata_bar5 + 0x2b0), 0xFFFFFFFF);
-+	write32((sata_bar5 + 0x330), 0xFFFFFFFF);
-+	write32((sata_bar5 + 0x3b0), 0xFFFFFFFF);
-+
- 	/* Clear SATA status,Firstly we get the AcpiGpe0BlkAddr */
- 	/* ????? why CIM does not set the AcpiGpe0BlkAddr , but use it??? */
- 
--- 
-1.7.9.5
-