ich9deblob/ich9gen: use portable data types

For those integers that need to be a certain byte size.

14 files changed, 244 insertions, 235 deletions

diff --git a/resources/utilities/ich9deblob/Makefile b/resources/utilities/ich9deblob/Makefile
index a1d979d9..be4df852 100644
--- a/resources/utilities/ich9deblob/Makefile
+++ b/resources/utilities/ich9deblob/Makefile
@@ -18,7 +18,8 @@
 #
 
 CC=gcc
-CFLAGS=-I. -Wall -g
+FORCEC99=-std=c99
+CFLAGS=-I. -Wall -Wextra -g $(FORCEC99)
 NOLINKER=-c
 
 all: ich9deblob ich9gen
diff --git a/resources/utilities/ich9deblob/src/common/descriptor_gbe.c b/resources/utilities/ich9deblob/src/common/descriptor_gbe.c
index ca50ac04..581f755e 100644
--- a/resources/utilities/ich9deblob/src/common/descriptor_gbe.c
+++ b/resources/utilities/ich9deblob/src/common/descriptor_gbe.c
@@ -31,8 +31,8 @@ int notCreatedDescriptorGbeFile(struct DESCRIPTORREGIONRECORD descriptorStruct,
 	FILE* fileStream = NULL;
 	
 	/* These will have the structs copied to them */
-	char descriptorBuffer[DESCRIPTORREGIONSIZE];
-	char gbeBuffer8k[GBEREGIONSIZE_8K];
+	uint8_t descriptorBuffer[DESCRIPTORREGIONSIZE];
+	uint8_t gbeBuffer8k[GBEREGIONSIZE_8K];
 	
 	/* Copy the structs to buffers, to make writing them as files easier */
 	memcpy(&descriptorBuffer, &descriptorStruct, DESCRIPTORREGIONSIZE); /* descriptor */
@@ -45,14 +45,14 @@ int notCreatedDescriptorGbeFile(struct DESCRIPTORREGIONRECORD descriptorStruct,
 	fileStream = fopen(fileName, "ab");
 	
 	/* write the descriptor region into the first part */
-	if (DESCRIPTORREGIONSIZE != fwrite(descriptorBuffer, sizeof(char), DESCRIPTORREGIONSIZE, fileStream))
+	if (DESCRIPTORREGIONSIZE != fwrite(descriptorBuffer, 1, DESCRIPTORREGIONSIZE, fileStream))
 	{
 		printf("\nerror: writing descriptor region failed\n");
 		return 1;
 	}
 	
 	/* add gbe to the end of the file */
-	if (GBEREGIONSIZE_8K != fwrite(gbeBuffer8k, sizeof(char), GBEREGIONSIZE_8K, fileStream))
+	if (GBEREGIONSIZE_8K != fwrite(gbeBuffer8k, 1, GBEREGIONSIZE_8K, fileStream))
 	{
 		printf("\nerror: writing GBe region failed\n");
 		return 1;
diff --git a/resources/utilities/ich9deblob/src/common/descriptor_gbe.h b/resources/utilities/ich9deblob/src/common/descriptor_gbe.h
index cc0cc42f..d3e8977e 100644
--- a/resources/utilities/ich9deblob/src/common/descriptor_gbe.h
+++ b/resources/utilities/ich9deblob/src/common/descriptor_gbe.h
@@ -26,6 +26,7 @@
 
 #include <stdio.h>
 #include <string.h>
+#include <stdint.h>
 
 #include "../descriptor/descriptor.h" /* structs describing what's in the descriptor region */
 #include "../gbe/gbe.h"               /* structs describing what's in the gbe region */
diff --git a/resources/utilities/ich9deblob/src/common/x86compatibility.c b/resources/utilities/ich9deblob/src/common/x86compatibility.c
index 505a37d9..aaf31733 100644
--- a/resources/utilities/ich9deblob/src/common/x86compatibility.c
+++ b/resources/utilities/ich9deblob/src/common/x86compatibility.c
@@ -51,10 +51,10 @@ int structSizesIncorrect(struct DESCRIPTORREGIONRECORD descriptorDummy, struct G
 /* endianness check. big endian forced to fail */
 int systemIsBigEndian() 
 {
-	unsigned short steak = 0xBEEF;
-	unsigned char *grill = (unsigned char*)&steak;
+	uint16_t steak = 0xBEEF;
+	uint8_t *grill = (uint8_t*)&steak;
 	
-	if (*grill==0xBE) {
+	if (*grill!=0xEF) {
 		printf("\nunsigned short 0xBEEF: first byte should be EF, but it's BE. Your system is big endian, and unsupported (only little endian is tested)\n");
 		return 1;
 	}
@@ -66,7 +66,7 @@ int structMembersWrongOrder()
 {
 	int i;
 	struct DESCRIPTORREGIONRECORD descriptorDummy;
-	unsigned char *meVsccTablePtr = (unsigned char*)&descriptorDummy.meVsccTable;
+	uint8_t *meVsccTablePtr = (uint8_t*)&descriptorDummy.meVsccTable;
 	
 	/* These do not use bitfields.  */
 	descriptorDummy.meVsccTable.jid0 = 0x01020304;  /* unsigned int 32-bit */
@@ -124,7 +124,7 @@ int structBitfieldWrongOrder()
 {
 	int i;
 	struct DESCRIPTORREGIONRECORD descriptorDummy;
-	unsigned char *flMap0Ptr = (unsigned char*)&descriptorDummy.flMaps.flMap0;
+	uint8_t *flMap0Ptr = (uint8_t*)&descriptorDummy.flMaps.flMap0;
 	
 	descriptorDummy.flMaps.flMap0.FCBA = 0xA2;      /* :8 --> 10100010 */
 	descriptorDummy.flMaps.flMap0.NC = 0x02;        /* :2 --> 10       */
diff --git a/resources/utilities/ich9deblob/src/common/x86compatibility.h b/resources/utilities/ich9deblob/src/common/x86compatibility.h
index d9d5bdb3..e5f02bee 100644
--- a/resources/utilities/ich9deblob/src/common/x86compatibility.h
+++ b/resources/utilities/ich9deblob/src/common/x86compatibility.h
@@ -26,6 +26,7 @@
 
 #include <stdio.h>
 #include <string.h>
+#include <stdint.h>
 
 #include "../descriptor/descriptor.h" /* structs describing what's in the descriptor region */
 #include "../gbe/gbe.h"               /* structs describing what's in the gbe region */
diff --git a/resources/utilities/ich9deblob/src/descriptor/descriptor.h b/resources/utilities/ich9deblob/src/descriptor/descriptor.h
index 04a5c93c..7feddf12 100644
--- a/resources/utilities/ich9deblob/src/descriptor/descriptor.h
+++ b/resources/utilities/ich9deblob/src/descriptor/descriptor.h
@@ -40,6 +40,7 @@
 
 #include <stdio.h>
 #include <string.h>
+#include <stdint.h>
 #include "../gbe/gbe.h" /* Needed for GBEREGIONSIZE_4K/8K define */
 
 /* size of the descriptor in bytes */
@@ -67,39 +68,39 @@ struct FLVALSIG
 	 * descriptor mode = 0FF0A55A (hex, big endian). Note: stored in ROM in little endian order.
 	 * Anything else is considered invalid and will put the machine in non-descriptor mode.
 	 */
-	unsigned int signature; /* Put 0x0FF0A55A here. confirmed in deblobbed_descriptor.bin */
+	uint32_t signature; /* Put 0x0FF0A55A here. confirmed in deblobbed_descriptor.bin */
 };
 
 /*  */
 struct FLMAP0
 {
 	/* least signicant bits */
-	unsigned char FCBA                      : 8;
-	unsigned char NC                        : 2;
-	unsigned char reserved1                 : 6;
-	unsigned char FRBA                      : 8;
-	unsigned char NR                        : 3;
-	unsigned char reserved2                 : 5;
+	uint8_t FCBA                      : 8;
+	uint8_t NC                        : 2;
+	uint8_t reserved1                 : 6;
+	uint8_t FRBA                      : 8;
+	uint8_t NR                        : 3;
+	uint8_t reserved2                 : 5;
 	/* most significant bits. */
 };
 
 struct FLMAP1 
 {
 	/* least significant bits */
-	unsigned char FMBA                      : 8;
-	unsigned char NM                        : 3;
-	unsigned char reserved                  : 5;
-	unsigned char FISBA                     : 8;
-	unsigned char ISL                       : 8;
+	uint8_t FMBA                      : 8;
+	uint8_t NM                        : 3;
+	uint8_t reserved                  : 5;
+	uint8_t FISBA                     : 8;
+	uint8_t ISL                       : 8;
 	/* most significant bits */
 };
 
 struct FLMAP2 
 {
 	/* least significant bits */
-	unsigned char FMSBA                     : 8;
-	unsigned char MSL                       : 8;
-	unsigned short reserved                 : 16;
+	uint8_t FMSBA                     : 8;
+	uint8_t MSL                       : 8;
+	uint16_t reserved                 : 16;
 	/* most significant bits */
 };
 
@@ -115,35 +116,35 @@ struct FLMAPS
 struct FLCOMP 
 {
 	/* least significant bits */
-	unsigned char component1Density         : 3;
-	unsigned char component2Density         : 3;
-	unsigned char reserved1                 : 2;
-	unsigned char reserved2                 : 8;
-	unsigned char reserved3                 : 1;
-	unsigned char readClockFrequency        : 3;
-	unsigned char fastReadSupport           : 1;
-	unsigned char fastreadClockFrequency    : 3;
-	unsigned char writeEraseClockFrequency  : 3;
-	unsigned char readStatusClockFrequency  : 3;
-	unsigned char reserved4                 : 2;
+	uint8_t component1Density         : 3;
+	uint8_t component2Density         : 3;
+	uint8_t reserved1                 : 2;
+	uint8_t reserved2                 : 8;
+	uint8_t reserved3                 : 1;
+	uint8_t readClockFrequency        : 3;
+	uint8_t fastReadSupport           : 1;
+	uint8_t fastreadClockFrequency    : 3;
+	uint8_t writeEraseClockFrequency  : 3;
+	uint8_t readStatusClockFrequency  : 3;
+	uint8_t reserved4                 : 2;
 	/* most significant bits */
 };
 
 struct COMPONENTSECTIONRECORD 
 {
 	struct FLCOMP flcomp;
-	unsigned int flill;
-	unsigned int flpb;
-	unsigned char padding[36];
+	uint32_t flill;
+	uint32_t flpb;
+	uint8_t padding[36];
 };
 
 struct FLREG 
 {
 	/* least significant bits */
-	unsigned short BASE                     : 13;
-	unsigned short reserved1                : 3;
-	unsigned short LIMIT                    : 13;
-	unsigned short reserved2                : 3;
+	uint16_t BASE                     : 13;
+	uint16_t reserved1                : 3;
+	uint16_t LIMIT                    : 13;
+	uint16_t reserved2                : 3;
 	/* most significant bits */
 };
 
@@ -159,25 +160,25 @@ struct REGIONSECTIONRECORD
 	struct FLREG flReg2;                         /*  ME         */
 	struct FLREG flReg3;                         /*  Gbe        */
 	struct FLREG flReg4;                         /*  Platform   */
-	unsigned char padding[12];
+	uint8_t padding[12];
 };
 
 struct FLMSTR 
 {
 	/* least significant bits */
-   unsigned short requesterId              : 16;
-	unsigned char fdRegionReadAccess        : 1;
-	unsigned char biosRegionReadAccess      : 1;
-	unsigned char meRegionReadAccess        : 1;
-	unsigned char gbeRegionReadAccess       : 1;
-	unsigned char pdRegionReadAccess        : 1;
-	unsigned char reserved1                 : 3; /* Must be zero, according to datasheet */
-	unsigned char fdRegionWriteAccess       : 1;
-	unsigned char biosRegionWriteAccess     : 1;
-	unsigned char meRegionWriteAccess       : 1;
-	unsigned char gbeRegionWriteAccess      : 1;
-	unsigned char pdRegionWriteAccess       : 1;
-	unsigned char reserved2                 : 3; /* Must be zero, according to datasheet */
+   uint16_t requesterId              : 16;
+	uint8_t fdRegionReadAccess        : 1;
+	uint8_t biosRegionReadAccess      : 1;
+	uint8_t meRegionReadAccess        : 1;
+	uint8_t gbeRegionReadAccess       : 1;
+	uint8_t pdRegionReadAccess        : 1;
+	uint8_t reserved1                 : 3; /* Must be zero, according to datasheet */
+	uint8_t fdRegionWriteAccess       : 1;
+	uint8_t biosRegionWriteAccess     : 1;
+	uint8_t meRegionWriteAccess       : 1;
+	uint8_t gbeRegionWriteAccess      : 1;
+	uint8_t pdRegionWriteAccess       : 1;
+	uint8_t reserved2                 : 3; /* Must be zero, according to datasheet */
 	/* most significant bits */
 };
 
@@ -187,39 +188,39 @@ struct MASTERACCESSSECTIONRECORD
 	struct FLMSTR flMstr1;                       /* Flash Master 1 (Host CPU / BIOS) */
 	struct FLMSTR flMstr2;                       /* Flash Master 2 (ME) */
 	struct FLMSTR flMstr3;                       /* Flash Master 3 (Gbe) */
-	unsigned char padding[148];
+	uint8_t padding[148];
 };
 
 struct ICHSTRAP0 
 {
 	/* least significant bits */
 	                                             /* todo: add MeSmBus2Sel (boring setting) */
-	unsigned char meDisable                 : 1; /* If true, ME is disabled. */
-	unsigned char reserved1                 : 6;
-	unsigned char tcoMode                   : 1; /* TCO Mode: (Legacy,TCO Mode) The TCO Mode, along with the BMCMODE strap, determines the behavior of the IAMT SmBus controller. */
-	unsigned char smBusAddress              : 7; /* The ME SmBus 7-bit address. */
-	unsigned char bmcMode                   : 1; /* BMC mode: If true, device is in BMC mode.  If Intel(R) AMT or ASF using Intel integrated LAN then this should be false. */
-	unsigned char tripPointSelect           : 1; /* Trip Point Select: false the NJCLK input buffer is matched to 3.3v signal from the external PHY device, true is matched to 1.8v. */
-	unsigned char reserved2                 : 2;
-	unsigned char integratedGbe             : 1; /* Integrated GbE or PCI Express select: (PCI Express,,Integrated GbE) Defines what PCIe Port 6 is used for. */
-	unsigned char lanPhy                    : 1; /* LANPHYPC_GP12_SEL: Set to 0 for GP12 to be used as GPIO (General Purpose Input/Output), or 1 for GP12 to be used for native mode as LAN_PHYPC for 82566 LCD device */
-	unsigned char reserved3                 : 3;
-	unsigned char dmiRequesterId            : 1; /* DMI requestor ID security check disable: The primary purpose of this strap is to support server environments with multiple CPUs that each have a different RequesterID that can access the Flash. */
-	unsigned char smBus2Address             : 7; /* The ME SmBus 2 7-bit address. */
+	uint8_t meDisable                 : 1; /* If true, ME is disabled. */
+	uint8_t reserved1                 : 6;
+	uint8_t tcoMode                   : 1; /* TCO Mode: (Legacy,TCO Mode) The TCO Mode, along with the BMCMODE strap, determines the behavior of the IAMT SmBus controller. */
+	uint8_t smBusAddress              : 7; /* The ME SmBus 7-bit address. */
+	uint8_t bmcMode                   : 1; /* BMC mode: If true, device is in BMC mode.  If Intel(R) AMT or ASF using Intel integrated LAN then this should be false. */
+	uint8_t tripPointSelect           : 1; /* Trip Point Select: false the NJCLK input buffer is matched to 3.3v signal from the external PHY device, true is matched to 1.8v. */
+	uint8_t reserved2                 : 2;
+	uint8_t integratedGbe             : 1; /* Integrated GbE or PCI Express select: (PCI Express,,Integrated GbE) Defines what PCIe Port 6 is used for. */
+	uint8_t lanPhy                    : 1; /* LANPHYPC_GP12_SEL: Set to 0 for GP12 to be used as GPIO (General Purpose Input/Output), or 1 for GP12 to be used for native mode as LAN_PHYPC for 82566 LCD device */
+	uint8_t reserved3                 : 3;
+	uint8_t dmiRequesterId            : 1; /* DMI requestor ID security check disable: The primary purpose of this strap is to support server environments with multiple CPUs that each have a different RequesterID that can access the Flash. */
+	uint8_t smBus2Address             : 7; /* The ME SmBus 2 7-bit address. */
 	/* most significant bits */
 };
 
 struct ICHSTRAP1 
 {
 	/* least significant bits */
-	unsigned char northMlink                : 1;  /* North MLink Dynamic Clock Gate Disable : Sets the default value for the South MLink Dynamic Clock Gate Enable registers. */
-	unsigned char southMlink                : 1;  /* South MLink Dynamic Clock Gate Enable : Sets the default value for the South MLink Dynamic Clock Gate Enable registers. */
-	unsigned char meSmbus                   : 1;  /* ME SmBus Dynamic Clock Gate Enable : Sets the default value for the ME SMBus Dynamic Clock Gate Enable for both the ME SmBus controllers. */
-	unsigned char sstDynamic                : 1;  /* SST Dynamic Clock Gate Enable : Sets the default value for the SST Clock Gate Enable registers. */
-	unsigned char reserved1                 : 4;
-	unsigned char northMlink2               : 1;  /* North MLink 2 Non-Posted Enable : 'true':North MLink supports two downstream non-posted requests. 'false':North MLink supports one downstream non-posted requests. */
-	unsigned char reserved2                 : 7;
-	unsigned short reserved3                : 16;
+	uint8_t northMlink                : 1;  /* North MLink Dynamic Clock Gate Disable : Sets the default value for the South MLink Dynamic Clock Gate Enable registers. */
+	uint8_t southMlink                : 1;  /* South MLink Dynamic Clock Gate Enable : Sets the default value for the South MLink Dynamic Clock Gate Enable registers. */
+	uint8_t meSmbus                   : 1;  /* ME SmBus Dynamic Clock Gate Enable : Sets the default value for the ME SMBus Dynamic Clock Gate Enable for both the ME SmBus controllers. */
+	uint8_t sstDynamic                : 1;  /* SST Dynamic Clock Gate Enable : Sets the default value for the SST Clock Gate Enable registers. */
+	uint8_t reserved1                 : 4;
+	uint8_t northMlink2               : 1;  /* North MLink 2 Non-Posted Enable : 'true':North MLink supports two downstream non-posted requests. 'false':North MLink supports one downstream non-posted requests. */
+	uint8_t reserved2                 : 7;
+	uint16_t reserved3                : 16;
 	/* most significant bits */
 };
 
@@ -228,20 +229,20 @@ struct ICHSTRAPSRECORD
 {
 	struct ICHSTRAP0 ichStrap0;
 	struct ICHSTRAP1 ichStrap1;
-	unsigned char padding[248];
+	uint8_t padding[248];
 };
 
 struct MCHSTRAP0 
 {
 	/* least significant bits */
-	unsigned char meDisable                 : 1;  /* If true, ME is disabled. */
-	unsigned char meBootFromFlash           : 1;  /* ME boot from Flash - guessed location */
-	unsigned char tpmDisable                : 1;  /* iTPM Disable : When set true, iTPM Host Interface is disabled. When set false (default), iTPM is enabled. */
-	unsigned char reserved1                 : 3;
-	unsigned char spiFingerprint            : 1;  /* SPI Fingerprint Sensor Present: Indicates if an SPI Fingerprint sensor is present at CS#1. */
-	unsigned char meAlternateDisable        : 1;  /* ME Alternate Disable: Setting this bit allows ME to perform critical chipset functions but prevents loading of any ME FW applications. */
-	unsigned char reserved2                 : 8;
-	unsigned short reserved3                : 16;
+	uint8_t meDisable                 : 1;  /* If true, ME is disabled. */
+	uint8_t meBootFromFlash           : 1;  /* ME boot from Flash - guessed location */
+	uint8_t tpmDisable                : 1;  /* iTPM Disable : When set true, iTPM Host Interface is disabled. When set false (default), iTPM is enabled. */
+	uint8_t reserved1                 : 3;
+	uint8_t spiFingerprint            : 1;  /* SPI Fingerprint Sensor Present: Indicates if an SPI Fingerprint sensor is present at CS#1. */
+	uint8_t meAlternateDisable        : 1;  /* ME Alternate Disable: Setting this bit allows ME to perform critical chipset functions but prevents loading of any ME FW applications. */
+	uint8_t reserved2                 : 8;
+	uint16_t reserved3                : 16;
 	/* most significant bits */
 };
 
@@ -249,36 +250,36 @@ struct MCHSTRAP0
 struct MCHSTRAPSRECORD 
 {
 	struct MCHSTRAP0 mchStrap0;
-	unsigned char padding[3292];
+	uint8_t padding[3292];
 };
 
 /* ME VSCC Table */
 struct MEVSCCTABLERECORD 
 {
-	unsigned int jid0;
-	unsigned int vscc0;
-	unsigned int jid1;
-	unsigned int vscc1;
-	unsigned int jid2;
-	unsigned int vscc2;
-	unsigned char padding[4];
+	uint32_t jid0;
+	uint32_t vscc0;
+	uint32_t jid1;
+	uint32_t vscc1;
+	uint32_t jid2;
+	uint32_t vscc2;
+	uint8_t padding[4];
 };
 
 /* Descriptor Map 2 Record */
 struct DESCRIPTORMAP2RECORD
 {
 	/* least significant bits */
-	unsigned char meVsccTableBaseAddress    : 8;
-	unsigned char meVsccTableLength         : 8;
-	unsigned short reserved                 : 16;
+	uint8_t meVsccTableBaseAddress    : 8;
+	uint8_t meVsccTableLength         : 8;
+	uint16_t reserved                 : 16;
 	/* most significant bits */
 };
 
 /* OEM section */
 struct OEMSECTIONRECORD 
 {
-	unsigned char magicString[8];
-	unsigned char padding[248];
+	uint8_t magicString[8];
+	uint8_t padding[248];
 };
 
 /* 4KiB descriptor region, goes at the beginning of the ROM image */
diff --git a/resources/utilities/ich9deblob/src/gbe/gbe.c b/resources/utilities/ich9deblob/src/gbe/gbe.c
index 150d1495..e8faa51f 100644
--- a/resources/utilities/ich9deblob/src/gbe/gbe.c
+++ b/resources/utilities/ich9deblob/src/gbe/gbe.c
@@ -33,15 +33,15 @@
  */
 
 /* Read a 16-bit unsigned int from a supplied region buffer */
-unsigned short gbeGetRegionWordFrom8kBuffer(int index, char* regionData)
+uint16_t gbeGetRegionWordFrom8kBuffer(int index, uint8_t* regionData)
 {
-	return *((unsigned short*)(regionData + (index * 2)));
+	return *((uint16_t*)(regionData + (index * 2)));
 }
 
 /* 
  * gbe checksum calculation (algorithm based on datasheet)
  */
-unsigned short gbeGetChecksumFrom8kBuffer(char* regionData, unsigned short desiredValue, int byteOffset)
+uint16_t gbeGetChecksumFrom8kBuffer(uint8_t* regionData, uint16_t desiredValue, int byteOffset)
 {
 	int i;
 	
@@ -51,8 +51,8 @@ unsigned short gbeGetChecksumFrom8kBuffer(char* regionData, unsigned short desir
 	 */
 	int wordOffset = byteOffset >> 1;
 	
-	unsigned short regionWord; /* store words here for adding to checksum */
-	unsigned short checksum = 0; /* this gbe's checksum */
+	uint16_t regionWord; /* store words here for adding to checksum */
+	uint16_t checksum = 0; /* this gbe's checksum */
 
 	for (i = 0; i < 0x3F; i++) {
 		regionWord = gbeGetRegionWordFrom8kBuffer(i+wordOffset, regionData);
@@ -63,9 +63,9 @@ unsigned short gbeGetChecksumFrom8kBuffer(char* regionData, unsigned short desir
 }
 
 /* checksum calculation for 4k gbe struct (algorithm based on datasheet) */
-unsigned short gbeGetChecksumFrom4kStruct(struct GBEREGIONRECORD_4K gbeStruct4k, unsigned short desiredValue)
+uint16_t gbeGetChecksumFrom4kStruct(struct GBEREGIONRECORD_4K gbeStruct4k, uint16_t desiredValue)
 {
-	char gbeBuffer4k[GBEREGIONSIZE_4K];
+	uint8_t gbeBuffer4k[GBEREGIONSIZE_4K];
 	memcpy(&gbeBuffer4k, &gbeStruct4k, GBEREGIONSIZE_4K);
 	return gbeGetChecksumFrom8kBuffer(gbeBuffer4k, desiredValue, 0);
 }
@@ -79,7 +79,7 @@ struct GBEREGIONRECORD_8K deblobbedGbeStructFromFactory(struct GBEREGIONRECORD_8
 	 * the backup as desired and then copy it to the main region.
 	 */
 	 
-	int i;
+	unsigned int i;
 	
 	struct GBEREGIONRECORD_8K deblobbedGbeStruct8k;
 	memcpy(&deblobbedGbeStruct8k, &factoryGbeStruct8k, GBEREGIONSIZE_8K);
diff --git a/resources/utilities/ich9deblob/src/gbe/gbe.h b/resources/utilities/ich9deblob/src/gbe/gbe.h
index 867927d9..4b2f496b 100644
--- a/resources/utilities/ich9deblob/src/gbe/gbe.h
+++ b/resources/utilities/ich9deblob/src/gbe/gbe.h
@@ -43,6 +43,7 @@
 
 #include <stdio.h>
 #include <string.h>
+#include <stdint.h>
 #include "../descriptor/descriptor.h"
 
 /* Size of the full gbe region in bytes */
@@ -77,70 +78,70 @@
 
 struct GBE_RESERVED_WORD_03H {
 	/* least significant bits */
-	unsigned char reserved1_0                  : 8; /* bits should all be set to zero */
-	unsigned char reserved1_1                  : 3;  /* ^ part of above. Separated so that the bitfields align */
-	unsigned char ibaLom                       : 1;  /* set to 1 for intel boot agent to work (i.e. set it to 0) */
-	unsigned char reserved2 		             : 4;  /* bits should all be set to zero */
+	uint8_t reserved1_0                  : 8; /* bits should all be set to zero */
+	uint8_t reserved1_1                  : 3;  /* ^ part of above. Separated so that the bitfields align */
+	uint8_t ibaLom                       : 1;  /* set to 1 for intel boot agent to work (i.e. set it to 0) */
+	uint8_t reserved2 		             : 4;  /* bits should all be set to zero */
 	/* most significant bits */
 };
 
 /* Word 0A */
 struct GBE_PCI_INITIALIZATION_CONTROL_WORD {
 	/* least significant bits */
-	unsigned char loadVendorDeviceId           : 1;  /* 1 = load from NVM. 0 = load from MAC fuses. It's 1 in my deblobbed_descriptor.bin */
-	unsigned char loadSubsystemId              : 1;  /* 1 = load from NVM. 0 = load from MAC fuses. It's 1 in my deblobbed_descriptor.bin */
-	unsigned char reserved1                    : 1;  /* Reserved. Set to 0 (according to datasheet). 0 in my deblobbed_descriptor.bin */
-	unsigned char reserved2                    : 3;  /* Reserved. Set them to 0 (according to datasheet). 0 in my deblobbed_descriptor.bin */
-	unsigned char pmEnable                     : 1;  /* Power Management Enable. 1=Enable. It's 1 in my deblobbed_descriptor.bin */
-	unsigned char auxPwr                       : 1;  /* Auxiliary Power Indication. See datasheet. it's 1 in my deblobbed_descriptor.bin */
-	unsigned char reserved3                    : 4;  /* Reserved. Set to 0000 (according to datasheet). */
-	unsigned char reserved4                    : 4;  /* Reserved. Set to 0001 (according to datasheet). */
+	uint8_t loadVendorDeviceId           : 1;  /* 1 = load from NVM. 0 = load from MAC fuses. It's 1 in my deblobbed_descriptor.bin */
+	uint8_t loadSubsystemId              : 1;  /* 1 = load from NVM. 0 = load from MAC fuses. It's 1 in my deblobbed_descriptor.bin */
+	uint8_t reserved1                    : 1;  /* Reserved. Set to 0 (according to datasheet). 0 in my deblobbed_descriptor.bin */
+	uint8_t reserved2                    : 3;  /* Reserved. Set them to 0 (according to datasheet). 0 in my deblobbed_descriptor.bin */
+	uint8_t pmEnable                     : 1;  /* Power Management Enable. 1=Enable. It's 1 in my deblobbed_descriptor.bin */
+	uint8_t auxPwr                       : 1;  /* Auxiliary Power Indication. See datasheet. it's 1 in my deblobbed_descriptor.bin */
+	uint8_t reserved3                    : 4;  /* Reserved. Set to 0000 (according to datasheet). */
+	uint8_t reserved4                    : 4;  /* Reserved. Set to 0001 (according to datasheet). */
 	/* most significant bits */
 };
 
 /* Word 10h. */
 struct GBE_LAN_POWER_CONSUMPTION {
 	/* least significant bits */
-	unsigned char lanD3Power                   : 5;  /* It's 00001b (0x1) in deblobbed_descriptor.bin */
-	unsigned char reserved                     : 3;  /* Reserved. These bits should all be 0. confirmed from deblobbed_descriptor.bin */
-	unsigned char lanD0Power                   : 8;  /* default value: 0x0D (according to datasheet). confirmed from deblobbed_descriptor.bin */
+	uint8_t lanD3Power                   : 5;  /* It's 00001b (0x1) in deblobbed_descriptor.bin */
+	uint8_t reserved                     : 3;  /* Reserved. These bits should all be 0. confirmed from deblobbed_descriptor.bin */
+	uint8_t lanD0Power                   : 8;  /* default value: 0x0D (according to datasheet). confirmed from deblobbed_descriptor.bin */
 	/* most significant bits */
 };
 
 /* Word 13h */
 struct GBE_SHARED_INITIALIZATION_CONTROL_WORD {
 	/* least significant bits */
-	unsigned char reserved1                    : 3;  /* Reserved. These bits should be set to 101 (0x5) in binary (according to datasheet and deblobbed_descriptor.bin) */
-	unsigned char forceDuplex                  : 1;  /* Hardware default is 0 according to datasheet and deblobbed_descriptor.bin. Presumably to set whether the chipset is to operate at full- or half-duplex */
-	unsigned char forceSpeedEnable             : 1;  /* Hardware default is 0. Presumably to limited speed eg 10, 10/100, 10/100/1000 */
-	unsigned char reserved2_0                  : 3;  /* Reserved. All bits should be set to 0 according to datasheet and deblobbed_descriptor.bin */
-	unsigned char reserved2_1                  : 1;  /* ^ part of above. separated so that bitfields align */
-	unsigned char phyPowerDownEnable           : 1;  /* PHY Power Down in D3/Dr (if WoL is disabled), 1 means Enable power down. deblobbed_descriptor.bin says 1 */
-	unsigned char reserved3                    : 1;  /* Reserved. Should be set to 1 according to datasheet and deblobbed_descriptor.bin */
-	unsigned char reserved4                    : 3;  /* Reserved. These bits should all be 0 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t reserved1                    : 3;  /* Reserved. These bits should be set to 101 (0x5) in binary (according to datasheet and deblobbed_descriptor.bin) */
+	uint8_t forceDuplex                  : 1;  /* Hardware default is 0 according to datasheet and deblobbed_descriptor.bin. Presumably to set whether the chipset is to operate at full- or half-duplex */
+	uint8_t forceSpeedEnable             : 1;  /* Hardware default is 0. Presumably to limited speed eg 10, 10/100, 10/100/1000 */
+	uint8_t reserved2_0                  : 3;  /* Reserved. All bits should be set to 0 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t reserved2_1                  : 1;  /* ^ part of above. separated so that bitfields align */
+	uint8_t phyPowerDownEnable           : 1;  /* PHY Power Down in D3/Dr (if WoL is disabled), 1 means Enable power down. deblobbed_descriptor.bin says 1 */
+	uint8_t reserved3                    : 1;  /* Reserved. Should be set to 1 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t reserved4                    : 3;  /* Reserved. These bits should all be 0 according to datasheet and deblobbed_descriptor.bin */
 	/* ^ reserved4: indicates whether a valid NVM is present. If invalid, MAC does not read NVM and uses default values. */
 	/* 00 = invalid NVM, 01 = invalid NVM, 10 = valid NVM present, 11 = invalid NVM */
 	/* Default should be 10 (binary) according to datasheet and deblobbed_descriptor.bin */
-	unsigned char sign                         : 2;  /* Make sure to set this to 0x2 (10 in binary) */
+	uint8_t sign                         : 2;  /* Make sure to set this to 0x2 (10 in binary) */
 	/* most significant bits */
 };
 
 /* Word 14h */
 struct GBE_EXTENDED_CONFIGURATION_CONTROL_WORD_1 {
 	/* least significant bits */
-	unsigned short extendedConfigurationPointer: 12; /* dword: base address of extended configuration area in NVM. should not be zero. Default is 020h according to datasheet and deblobbed_descriptor.bin */
-	unsigned char oemWriteEnable               : 1;  /* 1=enable. if set, loads oem bits from phy_ctrl register to the 82567. loaded to EXTCNF_CTRL register. default is 1 according to datasheet and deblobbed_descriptor.bin */
-	unsigned char reserved1                    : 1;  /* Reserved. default value 1 according to datasheet and deblobed_descriptor.bin */
-	unsigned char reserved2                    : 1;  /* Reserved. default value 0 according to datasheet and deblobbed_descriptor.bin */
-	unsigned char reserved3                    : 1;  /* Reserved. default value 0 according to datasheet and deblobbed_descriptor.bin */
+	uint16_t extendedConfigurationPointer: 12; /* dword: base address of extended configuration area in NVM. should not be zero. Default is 020h according to datasheet and deblobbed_descriptor.bin */
+	uint8_t oemWriteEnable               : 1;  /* 1=enable. if set, loads oem bits from phy_ctrl register to the 82567. loaded to EXTCNF_CTRL register. default is 1 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t reserved1                    : 1;  /* Reserved. default value 1 according to datasheet and deblobed_descriptor.bin */
+	uint8_t reserved2                    : 1;  /* Reserved. default value 0 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t reserved3                    : 1;  /* Reserved. default value 0 according to datasheet and deblobbed_descriptor.bin */
 	/* most significant bits */
 };
 
 /* Word 15h */
 struct GBE_EXTENDED_CONFIGURATION_CONTROL_WORD_2 {
 	/* least significant bits */
-	unsigned char reserved                     : 8;  /* Reserved. Should be 0 according to datasheet and deblobbed_descriptor.bin */
-	unsigned char extendedPhyLength            : 8;  /* dword: size of extended phy configuration area. most be 0 if phy config area is disabled. default is 0000101 (binary) or 05 (hex) according to datasheet, but 00001010 (0A) according to deblobbed_descriptor.bin. Is 0000101 (in the datasheet) a typo that actually means 00001010? */
+	uint8_t reserved                     : 8;  /* Reserved. Should be 0 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t extendedPhyLength            : 8;  /* dword: size of extended phy configuration area. most be 0 if phy config area is disabled. default is 0000101 (binary) or 05 (hex) according to datasheet, but 00001010 (0A) according to deblobbed_descriptor.bin. Is 0000101 (in the datasheet) a typo that actually means 00001010? */
 	/* most significant bits */
 };
 
@@ -155,22 +156,22 @@ struct LED_CTL_1 {
 	/* least significant bits */
 	
 	/* See page 16 in the datasheet to show the different modes. deblobbed_descriptor.bin has "ACTIVITY" mode set */
-	unsigned char led1Mode                     : 4;  /* Default value 0111 (bin) 7 (hex) says datasheet. 1011 (bin) B (hex) according to deblobbed_descriptor.bin */
+	uint8_t led1Mode                     : 4;  /* Default value 0111 (bin) 7 (hex) says datasheet. 1011 (bin) B (hex) according to deblobbed_descriptor.bin */
 	
-	unsigned char reserved1                    : 1;  /* Reserved. Should be 0 according to datasheet and deblobbed_descriptor.bin */
-	unsigned char led1BlinkMode                : 1;  /* 0 = slow blink, 1 = fast blink. should be identical to led0 blink mode. Default is 0 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t reserved1                    : 1;  /* Reserved. Should be 0 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t led1BlinkMode                : 1;  /* 0 = slow blink, 1 = fast blink. should be identical to led0 blink mode. Default is 0 according to datasheet and deblobbed_descriptor.bin */
 	/* By setting this and led0 blink mode (see word 18h) to 1, you could enable a faster blinking on the LED's where the ethernet cable goes
 	 * on the gigabit ethernet port. Not really useful. Slow blink is fine, and probably better (the LED will probably last longer) */
 
-	unsigned char led1Invert                   : 1;  /* initial value of LED1_IVRT field. 0 = led1 has active low output, 1 is high active output. Default is 0 according to datasheet and deblobbed_descriptor.bin */
-	unsigned char led1Blink                    : 1;  /* 1 = led1 blinks, 0 = it does not. default 0 according to datasheet, but it's 1 in deblobbed_descriptor.bin */
-	unsigned char reserved2                    : 1;  /* Reserved. should be 1 according to datasheet and deblobbed_descriptor.bin */
-	unsigned char lpluEnable                   : 1;  /* Low Power Link Up. Enable links at lowest supported speed by both link partners in all power states. 1=enabled(all power states), 0=disabled. Default is 0 according to datasheet and deblobbed_descriptor.bin */
-	unsigned char lpluEnableNonD0a             : 1;  /* Low Power Link up (non-D0a states). Same as above but only for non-D0a states. default is 1 according to and deblobbed_descriptor.bin */
-	unsigned char gbeDisableNonD0a             : 1;  /* If set to 1, disable gigabit speeds in non-D0a power states. Must be 1 (according to datasheet) because GbE is not supported in Sx mode. It's also set to 1 in deblobbed_descriptor.bin */
-	unsigned char reserved3                    : 2;  /* Reserved. Datasheet says both bits should be 0 (confirmed in deblobbed_descriptor.bin) */
-	unsigned char gbeDisable                   : 1;  /* When 1, gigabit speeds are disabled in all power states including D0a. Default is 0 according to datasheet and deblobbed_descriptor.bin */
-	unsigned char reserved4                    : 1;  /* Reserved. Should be 1, according to datasheet and deblobbed_descriptor.bin */
+	uint8_t led1Invert                   : 1;  /* initial value of LED1_IVRT field. 0 = led1 has active low output, 1 is high active output. Default is 0 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t led1Blink                    : 1;  /* 1 = led1 blinks, 0 = it does not. default 0 according to datasheet, but it's 1 in deblobbed_descriptor.bin */
+	uint8_t reserved2                    : 1;  /* Reserved. should be 1 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t lpluEnable                   : 1;  /* Low Power Link Up. Enable links at lowest supported speed by both link partners in all power states. 1=enabled(all power states), 0=disabled. Default is 0 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t lpluEnableNonD0a             : 1;  /* Low Power Link up (non-D0a states). Same as above but only for non-D0a states. default is 1 according to and deblobbed_descriptor.bin */
+	uint8_t gbeDisableNonD0a             : 1;  /* If set to 1, disable gigabit speeds in non-D0a power states. Must be 1 (according to datasheet) because GbE is not supported in Sx mode. It's also set to 1 in deblobbed_descriptor.bin */
+	uint8_t reserved3                    : 2;  /* Reserved. Datasheet says both bits should be 0 (confirmed in deblobbed_descriptor.bin) */
+	uint8_t gbeDisable                   : 1;  /* When 1, gigabit speeds are disabled in all power states including D0a. Default is 0 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t reserved4                    : 1;  /* Reserved. Should be 1, according to datasheet and deblobbed_descriptor.bin */
 	/* most significant bits */
 };
 
@@ -184,38 +185,38 @@ struct LED_CTL_02 {
 	/* least significant bits */
 	
 	/* see page 16 in datasheet to show the different modes. deblobbed_descriptor has "LINK-UP" mode set */
-	unsigned char led0Mode                     : 4;  /* default value 0100 (bin) or 4 (hex) according to datasheet. It's 0010 (bin) or 2 (hex) according to deblobbed_descriptor.bin */
+	uint8_t led0Mode                     : 4;  /* default value 0100 (bin) or 4 (hex) according to datasheet. It's 0010 (bin) or 2 (hex) according to deblobbed_descriptor.bin */
 	
-	unsigned char reserved1                    : 1;  /* Reserved. Should be set to 0 according to datasheet and deblobbed_descriptor.bin */
-	unsigned char led0BlinkMode                : 1;  /* This should be the same as led1BlinkMode (see word 17h). Default is 0 according to datasheet and deblobbed_descriptor.bin */
-	unsigned char led0Invert                   : 1;  /* initial value of LED0_IVRT field. 0 = led0 has active low output, 1 is high active output. Default is 0 according to datasheet and deblobbed_descriptor.bin */
-	unsigned char led0Blink                    : 1;  /* LED0_BLINK field. Should be 0 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t reserved1                    : 1;  /* Reserved. Should be set to 0 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t led0BlinkMode                : 1;  /* This should be the same as led1BlinkMode (see word 17h). Default is 0 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t led0Invert                   : 1;  /* initial value of LED0_IVRT field. 0 = led0 has active low output, 1 is high active output. Default is 0 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t led0Blink                    : 1;  /* LED0_BLINK field. Should be 0 according to datasheet and deblobbed_descriptor.bin */
 	
 	/* see page 16 in datasheet to shew the different modes. deblobbed_descriptor has "LINK_100" mode set */
-	unsigned char led2Mode                     : 4;  /* default value 0110 (bin) or 6 (hex) according to datasheet and deblobbed_descriptor.bin */
+	uint8_t led2Mode                     : 4;  /* default value 0110 (bin) or 6 (hex) according to datasheet and deblobbed_descriptor.bin */
 	
-	unsigned char reserved2                    : 1;  /* Reserved. Should be 0 according to datasheet and deblobbed_descriptor.bin */
-	unsigned char led2BlinkMode                : 1;  /* 0 = slow blink. 1 = fast. default 0 according to datasheet and deblobbed_descriptor.bin */
-	unsigned char led2Invert                   : 1;  /* LED2_IVRT field. Should be 0 according to datasheet and deblobbed_descriptor.bin */
-	unsigned char led2Blink                    : 1;  /* LED2_BLINK field. should be 0 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t reserved2                    : 1;  /* Reserved. Should be 0 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t led2BlinkMode                : 1;  /* 0 = slow blink. 1 = fast. default 0 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t led2Invert                   : 1;  /* LED2_IVRT field. Should be 0 according to datasheet and deblobbed_descriptor.bin */
+	uint8_t led2Blink                    : 1;  /* LED2_BLINK field. should be 0 according to datasheet and deblobbed_descriptor.bin */
 	/* most significant bits */
 };
 
 /* Word 30h */
 struct GBE_PXE_BOOT_AGENT_MAIN_SETUP_OPTIONS {
 	/* least significant bits */
-	unsigned char protocolSelect               : 2;  /* Default 00 binary (PXE) according to datasheet. 01 is reserved. 10/11 are undefined. deblobbed_descriptor.bin says 00 */
-	unsigned char reserved1                    : 1;  /* Reserved. deblobbed_descriptor.bin says 0 */
-	unsigned char defaultBootSelection         : 2;  /* deblobbed_descriptor.bin says 00 (binary). 00 is network boot, then local. 01 is local boot, then network. 10 is network boot only. 11 is local boot only */
-	unsigned char reserved2                    : 1;  /* Reserved. deblobbed_descriptor.bin says 0. */
-	unsigned char promptTime                   : 2;  /* deblobbed_descriptor.bin says 00. delay for how long "press ctrl-s" setup prompt message appears. 00 = 2 secs, 01 is 3 secs, 10 is 5 secs, 11 is 0 secs. */
-	unsigned char displaySetupMessage          : 1;  /* default 1 says datasheet. deblobbed_descriptor.bin says 1. if 1, "ctrl-s" setup prompt message appears after the title message. */
-	unsigned char reserved3                    : 1;  /* Datasheet says to set 0. deblobbed_descriptor.bin says 0. */
-	unsigned char forceSpeed                   : 2;  /* deblobbed_descriptor.bin says 00. 00 = auto-negotiate, 01 = 10Mbps, 10 = 100Mbps, 11 = "not allowed" */
-	unsigned char forceFullDuplex              : 1;  /* deblobbed_descriptor.bin says 0. Only relevant when bits 10/11 are set; if so, then: 0 = half duplex, 1 = full duplex */
-	unsigned char reserved4                    : 1;  /* Reserved. deblobbed_descriptor.bin says 0. datasheet recommends 0. */
-	unsigned char efiPresence                  : 1;  /* 1 means that an EFI image is present (0 means not present). deblobbed_descriptor.bin says 0. if 1, eeprom word 33h (efi version) becomes valid. if pxePresent is 1, that means EFI and PXE are both present.*/
-	unsigned char pxePresence                  : 1;  /* 0 means that a PXE image is present. 1 means to pxe present. deblobbed_descriptor.bin says 0. if 0, then word 32h (PXE version) in eeprom becomes valid */
+	uint8_t protocolSelect               : 2;  /* Default 00 binary (PXE) according to datasheet. 01 is reserved. 10/11 are undefined. deblobbed_descriptor.bin says 00 */
+	uint8_t reserved1                    : 1;  /* Reserved. deblobbed_descriptor.bin says 0 */
+	uint8_t defaultBootSelection         : 2;  /* deblobbed_descriptor.bin says 00 (binary). 00 is network boot, then local. 01 is local boot, then network. 10 is network boot only. 11 is local boot only */
+	uint8_t reserved2                    : 1;  /* Reserved. deblobbed_descriptor.bin says 0. */
+	uint8_t promptTime                   : 2;  /* deblobbed_descriptor.bin says 00. delay for how long "press ctrl-s" setup prompt message appears. 00 = 2 secs, 01 is 3 secs, 10 is 5 secs, 11 is 0 secs. */
+	uint8_t displaySetupMessage          : 1;  /* default 1 says datasheet. deblobbed_descriptor.bin says 1. if 1, "ctrl-s" setup prompt message appears after the title message. */
+	uint8_t reserved3                    : 1;  /* Datasheet says to set 0. deblobbed_descriptor.bin says 0. */
+	uint8_t forceSpeed                   : 2;  /* deblobbed_descriptor.bin says 00. 00 = auto-negotiate, 01 = 10Mbps, 10 = 100Mbps, 11 = "not allowed" */
+	uint8_t forceFullDuplex              : 1;  /* deblobbed_descriptor.bin says 0. Only relevant when bits 10/11 are set; if so, then: 0 = half duplex, 1 = full duplex */
+	uint8_t reserved4                    : 1;  /* Reserved. deblobbed_descriptor.bin says 0. datasheet recommends 0. */
+	uint8_t efiPresence                  : 1;  /* 1 means that an EFI image is present (0 means not present). deblobbed_descriptor.bin says 0. if 1, eeprom word 33h (efi version) becomes valid. if pxePresent is 1, that means EFI and PXE are both present.*/
+	uint8_t pxePresence                  : 1;  /* 0 means that a PXE image is present. 1 means to pxe present. deblobbed_descriptor.bin says 0. if 0, then word 32h (PXE version) in eeprom becomes valid */
 	/* most significant bits */
 	
 	/* This whole data structure is pointless, since libreboot doesn't (read: won't)
@@ -224,23 +225,23 @@ struct GBE_PXE_BOOT_AGENT_MAIN_SETUP_OPTIONS {
 /* Word 31h */
 struct GBE_PXE_BOOT_AGENT_CONFIGURATION_CUSTOMIZATION_OPTIONS_31H {
 	/* least significant bits */
-	unsigned char disableSetupMenu             : 1;  /* 1 means invoking setup menu with ctrl-s won't work. deblobbed_descriptor.bin says 0 (as is default, per datasheet) */
-	unsigned char disableTitleMessage          : 1;  /* 1 means that title in boot agent screen is suppressed, as is ctrl-s message. default is 0, and deblobbed_descriptor.bin says 0 */
-	unsigned char disableProtocolSelect        : 1;  /* 1 means no changes to boot protocol are allowed. default is 0, and deblobbed_descriptor.bin says 0 */
-	unsigned char disableBootSelection         : 1;  /* 1 means no changes in boot order option menu are allowed. default is 0, and deblobbed_descriptor.bin says 0 */
-	unsigned char disableLegacyWakeupSupport   : 1;  /* 1 means no changes in legacy wakeup support menu is allowed. default is 0, and deblobbed_descriptor.bin says 0 */
-	unsigned char disableFlashUpdate           : 1;  /* 1 means no changes to flash image using PROset is allowed. default is 0, and deblobbed_descriptor.bin says 0 */
-	unsigned char reserved1                    : 2;  /* Reserved. Datasheet says these must be 0, and deblobbed_descriptor.bin sets them to 0. */
+	uint8_t disableSetupMenu             : 1;  /* 1 means invoking setup menu with ctrl-s won't work. deblobbed_descriptor.bin says 0 (as is default, per datasheet) */
+	uint8_t disableTitleMessage          : 1;  /* 1 means that title in boot agent screen is suppressed, as is ctrl-s message. default is 0, and deblobbed_descriptor.bin says 0 */
+	uint8_t disableProtocolSelect        : 1;  /* 1 means no changes to boot protocol are allowed. default is 0, and deblobbed_descriptor.bin says 0 */
+	uint8_t disableBootSelection         : 1;  /* 1 means no changes in boot order option menu are allowed. default is 0, and deblobbed_descriptor.bin says 0 */
+	uint8_t disableLegacyWakeupSupport   : 1;  /* 1 means no changes in legacy wakeup support menu is allowed. default is 0, and deblobbed_descriptor.bin says 0 */
+	uint8_t disableFlashUpdate           : 1;  /* 1 means no changes to flash image using PROset is allowed. default is 0, and deblobbed_descriptor.bin says 0 */
+	uint8_t reserved1                    : 2;  /* Reserved. Datasheet says these must be 0, and deblobbed_descriptor.bin sets them to 0. */
 	
 	/*
 	 * deblobbed_descriptor says 000
 	 * 000 = normal behaviour
 	 * see datasheet (page 21) for other modes.
 	 */
-	unsigned char ibaBootOrderSetupMode        : 3;
+	uint8_t ibaBootOrderSetupMode        : 3;
 	
-	unsigned char reserved2                    : 3;  /* Reserved. Datasheet says these must be set to 0, and deblobbed_descriptor.bin sets them to 0. */
-	unsigned char signature                    : 2;  /* Must be set to 01 to indicate that this whole word has been configured by the agent or other software. deblobbed_descriptor.bin says 01. */
+	uint8_t reserved2                    : 3;  /* Reserved. Datasheet says these must be set to 0, and deblobbed_descriptor.bin sets them to 0. */
+	uint8_t signature                    : 2;  /* Must be set to 01 to indicate that this whole word has been configured by the agent or other software. deblobbed_descriptor.bin says 01. */
 	/* most significant bits */
 	
 	/* This whole data structure is pointless, since libreboot doesn't (read: won't)
@@ -249,9 +250,9 @@ struct GBE_PXE_BOOT_AGENT_CONFIGURATION_CUSTOMIZATION_OPTIONS_31H {
 /* Word 32h */
 struct GBE_PXE_BOOT_AGENT_CONFIGURATION_CUSTOMIZATION_OPTIONS_32H {
 	/* least significant bits */
-	unsigned char buildNumber                  : 8;  /* PXE boot agent build number. default is 28 (hex). deblobbed_descriptor.bin says 18 (hex) */
-	unsigned char minorVersionNumber           : 4;  /* PXE boot agent minor number. default is 2 (hex). deblobbed_descriptor.bin says 3 (hex) */
-	unsigned char majorVersionNumber           : 4;  /* PXE boot agent major number. default is F (hex). deblobbed_descriptor.bin says 1 (hex) */
+	uint8_t buildNumber                  : 8;  /* PXE boot agent build number. default is 28 (hex). deblobbed_descriptor.bin says 18 (hex) */
+	uint8_t minorVersionNumber           : 4;  /* PXE boot agent minor number. default is 2 (hex). deblobbed_descriptor.bin says 3 (hex) */
+	uint8_t majorVersionNumber           : 4;  /* PXE boot agent major number. default is F (hex). deblobbed_descriptor.bin says 1 (hex) */
 	/* most significant bits */
 	
 	/* This whole data structure is pointless, since libreboot doesn't (read: won't)
@@ -260,13 +261,13 @@ struct GBE_PXE_BOOT_AGENT_CONFIGURATION_CUSTOMIZATION_OPTIONS_32H {
 /* Word 33h */
 struct GBE_PXE_IBA_CAPABILITIES {
 	/* least significant bits */
-	unsigned char baseCodePresent              : 1;  /* 0 means PXE base code is indicated as being present. 1 (default) means not. deblobbed_descriptor.bin says 1 */
-	unsigned char undiCapabilityPresent        : 1;  /* 1 (default) means pxe/undi capability is indicated present. 0 means not present. deblobbed_descriptor.bin says 1 */
-	unsigned char reserved1                    : 1;  /* Reserved. Must be 1. deblobbed_descriptor.bin says 1 */
-	unsigned char efiUndiCapabilityPresent     : 1;  /* EFI UNDI capability present: 0 (default) means not present. 1 means present. deblobbed_descriptor.bin says 0 */
-	unsigned char reserved2_0                  : 4;  /* reserved. all bits must be 0. deblobbed_descriptor.bin sets them to 0. */
-	unsigned char reserved2_1                  : 6;  /* ^ part of reserved2_0. split this way so that the bitfields align */
-	unsigned char signature                    : 2;  /* must be 01 to indicate that the word is configured by the agent or other software. deblobbed_descriptor.bin says 01 */
+	uint8_t baseCodePresent              : 1;  /* 0 means PXE base code is indicated as being present. 1 (default) means not. deblobbed_descriptor.bin says 1 */
+	uint8_t undiCapabilityPresent        : 1;  /* 1 (default) means pxe/undi capability is indicated present. 0 means not present. deblobbed_descriptor.bin says 1 */
+	uint8_t reserved1                    : 1;  /* Reserved. Must be 1. deblobbed_descriptor.bin says 1 */
+	uint8_t efiUndiCapabilityPresent     : 1;  /* EFI UNDI capability present: 0 (default) means not present. 1 means present. deblobbed_descriptor.bin says 0 */
+	uint8_t reserved2_0                  : 4;  /* reserved. all bits must be 0. deblobbed_descriptor.bin sets them to 0. */
+	uint8_t reserved2_1                  : 6;  /* ^ part of reserved2_0. split this way so that the bitfields align */
+	uint8_t signature                    : 2;  /* must be 01 to indicate that the word is configured by the agent or other software. deblobbed_descriptor.bin says 01 */
 	/* most significant bits */
 	
 	/* This whole data structure is pointless, since libreboot doesn't (read: won't)
@@ -280,7 +281,7 @@ struct GBE_PXE_SOFTWARE_REGION {
 	struct GBE_PXE_IBA_CAPABILITIES ibaCapabilities;                                                                 /* Word 33h */
 	
 	/* Words 34h to 3Eh (padding). Set these to 0xFFFF (according to deblobbed_descriptor.bin) */
-	unsigned short paddingWords34hTo3Eh[11];
+	uint16_t paddingWords34hTo3Eh[11];
 	
 	/*
 	 * the pxe software region  is practically useless in libreboot, since
@@ -292,11 +293,11 @@ struct GBE_PXE_SOFTWARE_REGION {
 };
 
 struct GBEREGIONRECORD_4K {
-	unsigned char macAddress[6];                             /* Word 00 to 02 */
+	uint8_t macAddress[6];                             /* Word 00 to 02 */
 	struct GBE_RESERVED_WORD_03H reservedWord03h;            /* Reserved word 03. */
-	unsigned short reservedWord04h;                          /* Reserved word 04: set it to 0xFFFF (according to datasheet and deblobbed_descriptor.bin) */
-	unsigned short imageVersionInformation;                  /* Reserved word 05: 83 10 (little endian) in my deblobbed_descriptor.bin. Set this to 0x1083 (in C, assuming little endian byte order). "cannot be changed" according to datasheet */
-	unsigned short reservedWords06h07h[2];                   /* Reserved words 06-07: set both to 0xFFFF (according to datasheet and deblobbed_descriptor.bin) */
+	uint16_t reservedWord04h;                          /* Reserved word 04: set it to 0xFFFF (according to datasheet and deblobbed_descriptor.bin) */
+	uint16_t imageVersionInformation;                  /* Reserved word 05: 83 10 (little endian) in my deblobbed_descriptor.bin. Set this to 0x1083 (in C, assuming little endian byte order). "cannot be changed" according to datasheet */
+	uint16_t reservedWords06h07h[2];                   /* Reserved words 06-07: set both to 0xFFFF (according to datasheet and deblobbed_descriptor.bin) */
 
 	/*
 	 * Word 08 and 09 (pba low and pba high):
@@ -313,8 +314,8 @@ struct GBEREGIONRECORD_4K {
 	 * 
 	 * Setting it to FF FF FF FF should be fine, according to the datasheet.
 	 */
-	unsigned short pbaLow;												/* Word 08. Set it to 0x1008 (according to deblobbed_descriptor.bin). */
-	unsigned short pbaHigh;												/* Word 09. Set it to 0xFFFF (according to deblobbed_descriptor.bin). */
+	uint16_t pbaLow;												/* Word 08. Set it to 0x1008 (according to deblobbed_descriptor.bin). */
+	uint16_t pbaHigh;												/* Word 09. Set it to 0xFFFF (according to deblobbed_descriptor.bin). */
 	
 	/* Word 0A */
 	struct GBE_PCI_INITIALIZATION_CONTROL_WORD pciInitializationControlWord;
@@ -327,7 +328,7 @@ struct GBEREGIONRECORD_4K {
 	 * the subsystem id here. Datasheet says that the default value is
 	 * 0000h, but you should set this to 20EEh (little endian: EE 20)
 	 */
-	unsigned short subsystemId; /* Set this to 0x20EE */
+	uint16_t subsystemId; /* Set this to 0x20EE */
 	
 	/*
 	 * Word 0C; subsystem vendor ID
@@ -337,7 +338,7 @@ struct GBEREGIONRECORD_4K {
 	 * the subsystem vendor id here. Datasheet says that the default 
 	 * value is 8086h, but you should set this to 17AAh (lendian: AA 17).
 	 */
-	unsigned short subsystemVendorId; /* Set this to 0x17AA */
+	uint16_t subsystemVendorId; /* Set this to 0x17AA */
 	
 	/* 
 	 * Word 0D: device ID
@@ -353,7 +354,7 @@ struct GBEREGIONRECORD_4K {
 	 * Based on this, the X200 is shown to have the Intel 82567LM ethernet
 	 * controller.
 	 */
-	unsigned short deviceId; /* Set this to 0x10F5. */
+	uint16_t deviceId; /* Set this to 0x10F5. */
 	/* It is important that this is correct, for the linux kernel driver */
 	
 	/* 
@@ -365,11 +366,11 @@ struct GBEREGIONRECORD_4K {
 	 * 
 	 * Intel is often 8086 as a PCI vendor ID. Because 8086. As in the CPU architecture.
 	 */
-	unsigned short vendorId;
+	uint16_t vendorId;
 	
-	unsigned short deviceRevId;                              /* Word 0F: reserved bits. Set all bits to 0. */
+	uint16_t deviceRevId;                              /* Word 0F: reserved bits. Set all bits to 0. */
 	struct GBE_LAN_POWER_CONSUMPTION lanPowerConsumption;    /* Word 10: LAN Power Consumption (see struct definition) */
-	unsigned short reservedWords11h12h[2];							/* Words 11-12: Reserved. Set both of them to 0x0000 (according to datasheet). */
+	uint16_t reservedWords11h12h[2];							/* Words 11-12: Reserved. Set both of them to 0x0000 (according to datasheet). */
 	
 	/* Word 13: Shared Initialization Control Word */
 	struct GBE_SHARED_INITIALIZATION_CONTROL_WORD sharedInitializationControlWord;
@@ -382,27 +383,27 @@ struct GBEREGIONRECORD_4K {
 	
 	/* Word 16: Extended Configuration Control Word 3 */
 	/* All bits reserved. Datasheet and deblobbed_descriptor.bin say to set it to zero */
-	unsigned short extendedConfigurationControlWord3;
+	uint16_t extendedConfigurationControlWord3;
 	
 	struct LED_CTL_1 ledCtl1;                                /* Word 17: LED 1 Configuration and Power Management */
 	struct LED_CTL_02 ledCtl02;                              /* Word 18: LED 0 and 2 Configuration Defaults */
-	unsigned short reservedWord19h;                          /* Word 19: Reserved. Default is 0x2B00 according to datasheet, but in deblobbed_descriptor.bin it is 0x2B40 */
-	unsigned short reservedWord1Ah;                          /* Word 1A: Reserved. Default is 0x0043 according to datasheet and deblobbed_descriptor.bin */
-	unsigned short reservedWord1Bh;                          /* Word 1B: Reserved. Should be 0x0000 according to datasheet and deblobbed_descriptor.bin */
-	unsigned short reservedWord1Ch;                          /* Word 1C: Reserved. Should be 0x10F5 according to datasheet and deblobbed_descriptor.bin */
-	unsigned short reservedWord1Dh;                          /* Word 1D: Reserved. Should be 0xBAAD according to datasheet and deblobbed_descriptor.bin */
-	unsigned short _82567lmDeviceId;                         /* Word 1E: Device ID for Intel 82567LM gigabit ethernet controller (note: X200 uses this). Should be 0x10F5 according to datasheet and deblobbed_descriptor.bin*/
-	unsigned short _82567lfDeviceId;                         /* Word 1F: Device ID for Intel 82567LF gigabit ethernet controller. Should be 0x10BF according to datasheet and deblobbed_descriptor.bin */
-	unsigned short reservedWord20h;									/* Word 20: Reserved. Should be 0xBAAD according to datasheet and deblobbed_descriptor.bin */
-	unsigned short _82567vDeviceId;                          /* Word 21: Device ID for Intel 82567V gigabit ethernet controller. Should be 0x10CB according to datasheet and deblobbed_descriptor.bin */
-	unsigned short reservedWord22h;                          /* Word 22: Reserved. Should be 0xBAAD according to datasheet and deblobbed_descriptor.bin */
-	unsigned short reservedWord23h;                          /* Word 23: Reserved. Should be 0xBAAD according to datasheet and deblobbed_descriptor.bin */
-	unsigned short reservedWords24to2Fh[12];                 /* Words 24-2F: Reserved. These should all be 0x0000 according to datasheet and deblobbed_descriptor.bin */
+	uint16_t reservedWord19h;                          /* Word 19: Reserved. Default is 0x2B00 according to datasheet, but in deblobbed_descriptor.bin it is 0x2B40 */
+	uint16_t reservedWord1Ah;                          /* Word 1A: Reserved. Default is 0x0043 according to datasheet and deblobbed_descriptor.bin */
+	uint16_t reservedWord1Bh;                          /* Word 1B: Reserved. Should be 0x0000 according to datasheet and deblobbed_descriptor.bin */
+	uint16_t reservedWord1Ch;                          /* Word 1C: Reserved. Should be 0x10F5 according to datasheet and deblobbed_descriptor.bin */
+	uint16_t reservedWord1Dh;                          /* Word 1D: Reserved. Should be 0xBAAD according to datasheet and deblobbed_descriptor.bin */
+	uint16_t _82567lmDeviceId;                         /* Word 1E: Device ID for Intel 82567LM gigabit ethernet controller (note: X200 uses this). Should be 0x10F5 according to datasheet and deblobbed_descriptor.bin*/
+	uint16_t _82567lfDeviceId;                         /* Word 1F: Device ID for Intel 82567LF gigabit ethernet controller. Should be 0x10BF according to datasheet and deblobbed_descriptor.bin */
+	uint16_t reservedWord20h;									/* Word 20: Reserved. Should be 0xBAAD according to datasheet and deblobbed_descriptor.bin */
+	uint16_t _82567vDeviceId;                          /* Word 21: Device ID for Intel 82567V gigabit ethernet controller. Should be 0x10CB according to datasheet and deblobbed_descriptor.bin */
+	uint16_t reservedWord22h;                          /* Word 22: Reserved. Should be 0xBAAD according to datasheet and deblobbed_descriptor.bin */
+	uint16_t reservedWord23h;                          /* Word 23: Reserved. Should be 0xBAAD according to datasheet and deblobbed_descriptor.bin */
+	uint16_t reservedWords24to2Fh[12];                 /* Words 24-2F: Reserved. These should all be 0x0000 according to datasheet and deblobbed_descriptor.bin */
 	struct GBE_PXE_SOFTWARE_REGION pxeSoftwareRegion;        /* Words 30-3E: PXE Software Region */
-	unsigned short checkSum; /* when added to the sum of all words above, this should match GBECHECKSUMTOTAL */
+	uint16_t checkSum; /* when added to the sum of all words above, this should match GBECHECKSUMTOTAL */
 	
 	/* set all bytes in here to 0xFF */
-	unsigned char padding[3968];
+	uint8_t padding[3968];
 };
 
 /*  main and backup region in gbe */ 
@@ -423,9 +424,9 @@ struct GBEREGIONRECORD_8K {
  * ---------------------------------------------------------------------
  */
  
-unsigned short gbeGetRegionWordFrom8kBuffer(int index, char* regionData);
-unsigned short gbeGetChecksumFrom8kBuffer(char* regionData, unsigned short desiredValue, int byteOffset);
-unsigned short gbeGetChecksumFrom4kStruct(struct GBEREGIONRECORD_4K gbeStruct4k, unsigned short desiredValue);
+uint16_t gbeGetRegionWordFrom8kBuffer(int index, uint8_t* regionData);
+uint16_t gbeGetChecksumFrom8kBuffer(uint8_t* regionData, uint16_t desiredValue, int byteOffset);
+uint16_t gbeGetChecksumFrom4kStruct(struct GBEREGIONRECORD_4K gbeStruct4k, uint16_t desiredValue);
 struct GBEREGIONRECORD_8K deblobbedGbeStructFromFactory(struct GBEREGIONRECORD_8K factoryGbeStruct8k);
 int notCreatedHFileForGbeCFile(char* outFileName, char* cFileName);
 int notCreatedCFileFromGbeStruct4k(struct GBEREGIONRECORD_4K gbeStruct4k, char* outFileName, char* headerFileName);
diff --git a/resources/utilities/ich9deblob/src/ich9deblob.c b/resources/utilities/ich9deblob/src/ich9deblob.c
index 36066860..d025a64c 100644
--- a/resources/utilities/ich9deblob/src/ich9deblob.c
+++ b/resources/utilities/ich9deblob/src/ich9deblob.c
@@ -47,13 +47,13 @@
 
 #include "ich9deblob.h"
 
-int main(int argc, char *argv[])
+int main()
 {
 	/*
 	 * descriptor region. Will have an actual descriptor struct mapped to it (from the factory.rom dump)
 	 * and then it will be modified (deblobbed) to remove the ME/AMT
 	 */
-	char factoryDescriptorBuffer[DESCRIPTORREGIONSIZE];
+	uint8_t factoryDescriptorBuffer[DESCRIPTORREGIONSIZE];
 	struct DESCRIPTORREGIONRECORD factoryDescriptorStruct;
 	struct DESCRIPTORREGIONRECORD deblobbedDescriptorStruct;
 	
@@ -61,7 +61,7 @@ int main(int argc, char *argv[])
 	 * gbe region. Well have actual gbe buffer mapped to it (from the factory.rom dump)
 	 * and then it will be modified to correct the main region
 	 */
-	char factoryGbeBuffer8k[GBEREGIONSIZE_8K];
+	uint8_t factoryGbeBuffer8k[GBEREGIONSIZE_8K];
 	struct GBEREGIONRECORD_8K factoryGbeStruct8k;
 	struct GBEREGIONRECORD_8K deblobbedGbeStruct8k;
 	
@@ -69,7 +69,7 @@ int main(int argc, char *argv[])
 	 * Used to store the location of the Gbe
 	 * region inside the factory.rom image.
 	 */
-	unsigned int factoryGbeRegionStart;
+	uint32_t factoryGbeRegionStart;
 	
 	/* names of the files that this utility will handle */
 	char* factoryRomFilename = "factory.rom";                       /* user-supplied factory.bin dump (original firmware) */
@@ -109,7 +109,7 @@ int main(int argc, char *argv[])
 	 * Get the descriptor region dump from the factory.rom
 	 * (goes in factoryDescriptorBuffer variable)
 	 */
-	bufferLength = fread(factoryDescriptorBuffer, sizeof(char), DESCRIPTORREGIONSIZE, fileStream);
+	bufferLength = fread(factoryDescriptorBuffer, 1, DESCRIPTORREGIONSIZE, fileStream);
 	if (DESCRIPTORREGIONSIZE != bufferLength) // 
 	{
 		printf("\nerror: could not read descriptor from factory.rom (%i) bytes read\n", bufferLength);
@@ -149,7 +149,7 @@ int main(int argc, char *argv[])
 	 */
 	fseek(fileStream, factoryGbeRegionStart, SEEK_SET);
 	/* Read the gbe data from the factory.rom and put it in factoryGbeBuffer8k */
-	bufferLength = fread(factoryGbeBuffer8k, sizeof(char), GBEREGIONSIZE_8K, fileStream);
+	bufferLength = fread(factoryGbeBuffer8k, 1, GBEREGIONSIZE_8K, fileStream);
 	if (GBEREGIONSIZE_8K != bufferLength)
 	{
 		printf("\nerror: could not read GBe region from factory.rom (%i) bytes read\n", bufferLength);
diff --git a/resources/utilities/ich9deblob/src/ich9deblob.h b/resources/utilities/ich9deblob/src/ich9deblob.h
index a765bb5f..490d2f34 100644
--- a/resources/utilities/ich9deblob/src/ich9deblob.h
+++ b/resources/utilities/ich9deblob/src/ich9deblob.h
@@ -26,12 +26,13 @@
 
 #include <stdio.h>
 #include <string.h>
+#include <stdint.h>
 
 #include "common/descriptor_gbe.h"   /* common descriptor/gbe functions used by ich9deblob */
 #include "common/x86compatibility.h" /* system/compiler compatibility checks. This code is not portable. */
 #include "descriptor/descriptor.h"   /* structs describing what's in the descriptor region */
 #include "gbe/gbe.h"                 /* structs describing what's in the gbe region */
 
-int main(int argc, char *argv[]);
+int main();
 
 #endif
diff --git a/resources/utilities/ich9deblob/src/ich9gen.c b/resources/utilities/ich9deblob/src/ich9gen.c
index ad43a9d2..998dcf23 100644
--- a/resources/utilities/ich9deblob/src/ich9gen.c
+++ b/resources/utilities/ich9deblob/src/ich9gen.c
@@ -23,7 +23,7 @@
 int main(int argc, char *argv[]) 
 {
 	int i, j;
-	unsigned char customMacAddress[6]; /* Only set/used if the user wants to */
+	uint8_t customMacAddress[6]; /* Only set/used if the user wants to */
 	
 	struct GBEREGIONRECORD_8K gbeStruct8k = generatedGbeStruct8k();
 	struct DESCRIPTORREGIONRECORD descriptorStruct4M = generatedDescriptorStructRom4M();
@@ -74,11 +74,11 @@ int main(int argc, char *argv[])
 				/* Go through each nibble of the byte */
 				for(j=0; j<2; j++) {
 					if(argv[2][(i*3)+j]>='a' && argv[2][(i*3)+j]<='f')
-						customMacAddress[i] |= (argv[2][(i*3)+j] - 87) << ((j^1) << 2);
+						customMacAddress[i] |= (uint8_t)((argv[2][(i*3)+j] - 87) << ((j^1) << 2));
 					else if(argv[2][(i*3)+j]>='A' && argv[2][(i*3)+j]<='F')
-						customMacAddress[i] |= (argv[2][(i*3)+j] - 55) << ((j^1) << 2);
+						customMacAddress[i] |= (uint8_t)((argv[2][(i*3)+j] - 55) << ((j^1) << 2));
 					else if(argv[2][(i*3)+j]>='0' && argv[2][(i*3)+j]<='9')
-						customMacAddress[i] |= (argv[2][(i*3)+j] - 48) << ((j^1) << 2);
+						customMacAddress[i] |= (uint8_t)((argv[2][(i*3)+j] - 48) << ((j^1) << 2));
 					else {
 						printf("ich9gen: invalid mac address format (non-hex characters)\n");
 						return 1;
diff --git a/resources/utilities/ich9deblob/src/ich9gen.h b/resources/utilities/ich9deblob/src/ich9gen.h
index 287a66ea..25cf3405 100644
--- a/resources/utilities/ich9deblob/src/ich9gen.h
+++ b/resources/utilities/ich9deblob/src/ich9gen.h
@@ -22,6 +22,7 @@
 
 #include <stdio.h>
 #include <string.h>
+#include <stdint.h>
 
 #include "ich9gen/mkdescriptor.h"
 #include "ich9gen/mkgbe.h"
diff --git a/resources/utilities/ich9deblob/src/ich9gen/mkdescriptor.h b/resources/utilities/ich9deblob/src/ich9gen/mkdescriptor.h
index c4bbe690..745f11f9 100644
--- a/resources/utilities/ich9deblob/src/ich9gen/mkdescriptor.h
+++ b/resources/utilities/ich9deblob/src/ich9gen/mkdescriptor.h
@@ -20,6 +20,7 @@
 
 #include <stdio.h>
 #include <string.h>
+#include <stdint.h>
 #include "../descriptor/descriptor.h"
 
 /* ROM image sizes in bytes */
diff --git a/resources/utilities/ich9deblob/src/ich9gen/mkgbe.h b/resources/utilities/ich9deblob/src/ich9gen/mkgbe.h
index 5c67d83e..b7be8b37 100644
--- a/resources/utilities/ich9deblob/src/ich9gen/mkgbe.h
+++ b/resources/utilities/ich9deblob/src/ich9gen/mkgbe.h
@@ -20,6 +20,7 @@
 
 #include <stdio.h>
 #include <string.h>
+#include <stdint.h>
 #include "../gbe/gbe.h"
 
 struct GBEREGIONRECORD_4K generatedGbeStruct4k();