diff options
author | Alyssa Rosenzweig <alyssa@rosenzweig.io> | 2017-04-04 09:10:28 -0700 |
---|---|---|
committer | Leah Rowe <info@minifree.org> | 2017-04-04 23:49:57 +0100 |
commit | 1d2d09abfdc72e58a84c26f0c54db96f2ae58e07 (patch) | |
tree | 0ccdc528a371b2502cafa2bdd6b2e6c03ae7d88a /www | |
parent | 337183ebbd1114346d2261b6eaebc0381b6515ae (diff) | |
download | librebootfr-1d2d09abfdc72e58a84c26f0c54db96f2ae58e07.tar.gz librebootfr-1d2d09abfdc72e58a84c26f0c54db96f2ae58e07.zip |
Remove some of the less relevant FAQ entries
Diffstat (limited to 'www')
-rw-r--r-- | www/faq.md | 169 | ||||
-rwxr-xr-x | www/publish.sh | 2 |
2 files changed, 32 insertions, 139 deletions
@@ -21,15 +21,6 @@ this issue on some CCFL panels, but not LED panels. You can work around this in your distribution, by following the notes at [../docs/misc/\#backlight%20control](../docs/misc/#backlight%20control). -My computer thinks it's 1970-01-01 (GM45 laptops) --------------------------------------------------- - -Use Libreboot 20160818 or higher. This was a bug in coreboot, fixed -upstream and merged in Libreboot 20160818. - -Alternatively, you can use kernel version 4.2 or older, if you wish to -use libreboot 20150518 or earlier. - The ethernet doesn't work on my X200/T400/X60/T60 when I plug in it ------------------------------------------------------------------- @@ -39,7 +30,6 @@ hardware. On debian systems, a workaround is to restart the networking service when you connect the ethernet cable: sudo service network-manager restart - On Parabola, you can try: @@ -80,51 +70,14 @@ What systems are compatible with libreboot? See [../docs/hcl/](docs/hcl/). -Several supported systems are also available with libreboot -preinstalled. Check the [suppliers](suppliers.md) page for more -information. - -Will the Purism Librem laptops be supported? ----------------------------------------------------------------------- - -Probably not. There are several privacy, security and freedom issues -with these laptops, due to the Intel chipsets that they use. See - -replaced (e.g. [Intel Management Engine](#intelme) and [CPU microcode -updates](#microcode)). It uses the proprietary [Intel FSP](#fsp) blob -for the entire hardware initialization, which Intel [won't -provide](#intel-is-uncooperative) the source code for. The Video BIOS -(initialization firmware for the graphics hardware) is also proprietary. -The libreboot project recommends avoiding this hardware entirely. - -It will likely take many years to replace even one of these blobs, let -alone all of them. Some of them (ME firmware and microcode) can't even -be replaced, which immediately disqualifies these laptops from being -added to libreboot. Google engineers have tried for many years to get -source code from Intel, and to reverse engineer the blobs that Intel -provides. So far, they have been unsuccessful. Google is also one of the -companies that funds the coreboot project, and they hire a lot of the -core developers, so it's not like they don't have vast resources at -their disposal. Smaller companies have no chance. - -The librem does have coreboot support, but it's pretty meaningless -(it's shimboot, which means that coreboot is just incorporating blobs. -It's not real coreboot support, but rather, what is shamelessly passed -off as coreboot support these days, where binary blobs for **the -entire** hardware initialization is considered acceptable in the -coreboot project). It should be noted, that the coreboot port for librem -was done by a lone Google software developer (Duncan Laurie), not -Purism, working independently. Purism had nothing to do with the port. - Why is the latest Intel hardware unsupported in libreboot? {#intel} ----------------------------------------------------------- -It is extremely unlikely that any post-2008 Intel hardware will ever be -supported in libreboot, due to severe security and freedom issues; so -severe, that *the libreboot project recommends avoiding all modern Intel -hardware. If you have an Intel based system affected by the problems -described below, then you should get rid of it as soon as possible*. The -main issues are as follows: +It is unlikely that any post-2008 Intel hardware will ever be supported in +libreboot, due to severe security and freedom issues; so severe, that *the +libreboot project recommends avoiding all modern Intel hardware. If you have an +Intel based system affected by the problems described below, then you should +get rid of it as soon as possible*. The main issues are as follows: ### Intel Management Engine (ME) {#intelme} @@ -506,21 +459,6 @@ GPU. Therefore, the ATI GPU is completely disabled on these laptops. Intel is used instead, with the free native graphics initialization (VBIOS replacement) that exists in coreboot. -Will the latest ThinkPad models be supported? ------------------------------------------------------------------------------ - -The latest ThinkPad generation supported in libreboot are the ones using the -GM45 (ICH9) chipsets, such as the ThinkPad X200 or T400. ThinkPads newer than -this generation will probably never be supported in libreboot, due to the fact -that there are signed blobs that cannot be removed or replaced (e.g. Intel -Management Engine]. Newer laptops are starting to -[use](https://www.phoronix.com/scan.php?page=news_item&px=Intel-Boot-Guard-Kills-Coreboot) -the [Intel Boot Guard](https://mjg59.dreamwidth.org/33981.html), which -specifically blocks the use of firmware that has not been signed by the OEM. - -Coreboot does have support for some more recent Lenovo laptops, but libreboot -cannot support most of these. - Will desktop/server hardware be supported? ------------------------------------------------------------------------ @@ -575,15 +513,12 @@ How do I install libreboot? See [../docs/install/](docs/install/) -How do I program an SPI flash chip with the BeagleBone Black? +How do I program an SPI flash chip? --------------------------------------------------------------------------------- -See [../docs/install/bbb\_setup.html](../docs/install/bbb_setup.html). - -How do I program an SPI flash chip with the Raspberry Pi? ------------------------------------------------------------------------------ - -See [../docs/install/rpi\_setup.html](../docs/install/rpi_setup.html). +SPI flash chips can be programmed with the [BeagleBone +Black](../docs/install/bbb_setup.html) or the [Raspberry +Pi](../docs/install/rpi_setup.html). How do I set a boot password? ------------------------------------------------------------------- @@ -609,17 +544,10 @@ it is rendered read-only at the OS level (external flashing is still possible, using dedicated hardware). For example, on current GM45 laptops (e.g. ThinkPad X200, T400), you can write-protect (see [../docs/hcl/gm45\_remove\_me.html\#ich9gen](../docs/hcl/gm45_remove_me.html#ich9gen)). -Depending on your flash chip, you can also write-protect the i945 -laptops, such as the ThinkPad X60 or T60 (see -[../docs/hardware/x60\_security.html](../docs/hardware/x60_security.html)) -and -[../docs/hardware/t60\_security.html](../docs/hardware/t60_security.html) -for links to a video explaining it). -It's possible to write-protect on all libreboot systems, but the -instructions need to be written. The documentation is in the main git -repository, so you are welcome to submit patches adding these -instructions. +It's possible to write-protect on all libreboot systems, but the instructions +need to be written. The documentation is in the main git repository, so you are +welcome to submit patches adding these instructions. How do I change the BIOS settings? ------------------------------------------------------------------------ @@ -687,20 +615,6 @@ SOIC-16 SPI flash chip: ![SOIT-8 SPI flash chip](images/soic16.jpg) -Is there a backup of the old mailing list? --------------------------------------------------------------- - -Yes. We no longer use a mailing list, but archives can be found here: - -- [User mailing list - (HTML)](old/libreboot/html/lists.gnu.org/archive/html/libreboot) -- [User mailing list (mbox - format)](old/libreboot/mbox/lists.gnu.org/libreboot/) -- [Developer mailing list - (HTML)](old/libreboot-dev/html/lists.gnu.org/archive/html/libreboot-dev/) -- [Developer mailing list (mbox - format)](old/libreboot-dev/mbox/lists.gnu.org/libreboot-dev/) - Who did the logo? ---------------------------------------------------------------- @@ -714,11 +628,26 @@ Libreboot Inside stickers are available as a a [vector](logo/stickers/libreboot-inside-simple-bold-1.60cmx2.00cm-diecut-3.svg) -Freedom questions -================= +What other firmware exists outside of libreboot? +================================================== -Are external GPUs (e.g. PCI-E) OK? ------------------------------------------------------------------------- +The main freedom issue on any system, is the boot firmware (usually +referred to as a BIOS or UEFI). Libreboot replaces the boot firmware +with fully free code, but even with libreboot, there may still be other +hardware components in the system (e.g. laptop) that run their own +dedicated firmware, sometimes proprietary. These are on secondary +processors, where the firmware is usually read-only, written for very +specific tasks. While these are unrelated to libreboot, technically +speaking, it makes sense to document some of the issues here. + +Note that these issues are not unique to libreboot systems. They apply +universally, to most systems. The issues described below are the most +common (or otherwise critical). + +Dealing with these problems will most likely be handled by a separate +project. + +### External GPUs The Video BIOS is present on most video hardware. On all current libreboot systems, this is implemented using free software. The Video @@ -738,25 +667,6 @@ display without it (possible in some cases, if the kernel driver can be modified to work without it, possibly only needing certain non-executable data). -What other firmware exists outside of libreboot? ----------------------------------------------------------------------------------------- - -The main freedom issue on any system, is the boot firmware (usually -referred to as a BIOS or UEFI). Libreboot replaces the boot firmware -with fully free code, but even with libreboot, there may still be other -hardware components in the system (e.g. laptop) that run their own -dedicated firmware, sometimes proprietary. These are on secondary -processors, where the firmware is usually read-only, written for very -specific tasks. While these are unrelated to libreboot, technically -speaking, it makes sense to document some of the issues here. - -Note that these issues are not unique to libreboot systems. They apply -universally, to most systems. The issues described below are the most -common (or otherwise critical). - -Dealing with these problems will most likely be handled by a separate -project. - ### EC (embedded controller) firmware Most (all?) laptops have this. The EC (embedded controller) is a small, @@ -1037,23 +947,6 @@ out of the box. We would like to merge instructions for installing and booting BSD on libreboot systems. [Patches are welcome!](https://libreboot.org/git/) -Can I use Windows? ----------------------------------------------- - -Windows is incompatible with libreboot, and will probably remain so. You -should not use Windows, because it is non-free and therefore bad for -freedom. It is also known to have several severe security and privacy -issues, both intentional and unintentional. It is known to contact -backdoors, in addition to other nasty anti-features like DRM. - -Windows incompatibility is a feature, not a bug. - -Incompatible Time Sharing System? ------------------------------------------------------ - -jxself asked this in the IRC channel. As far as we know, this won't -work in libreboot systems, or indeed any modern system. - Are other operating systems compatible? ------------------------------------------------------------------- diff --git a/www/publish.sh b/www/publish.sh index 671163f6..c8838f17 100755 --- a/www/publish.sh +++ b/www/publish.sh @@ -19,7 +19,7 @@ echo "[License](license.md)" >> temp.md sed temp.md -i -e 's/\.md\(#[a-z\-]*\)*)/.html\1)/g' # work around issue #2872 -TOC=$(grep -q "^x-toc-enable: true$" temp.md && echo "--toc") +TOC=$(grep -q "^x-toc-enable: true$" temp.md && echo "--toc --toc-depth=2") # work around heterogenous pandoc versions SMART=$(pandoc -v | grep -q '2\.0' || echo "--smart") |