diff options
-rwxr-xr-x | builddeps-flashrom | 30 | ||||
-rwxr-xr-x | getflashrom | 2 | ||||
-rw-r--r-- | resources/flashrom/patch/COPYING | 2 | ||||
-rw-r--r-- | resources/flashrom/patch/flashchips.c.diff.lenovobios_macronix | 148 | ||||
-rw-r--r-- | resources/flashrom/patch/flashchips.c.diff.lenovobios_sst | 142 | ||||
-rw-r--r-- | resources/flashrom/patch/flashchips.c.diff.normal | 83 | ||||
-rw-r--r-- | resources/flashrom/patch/flashchips.c_lenovobios_macronix | 14660 | ||||
-rw-r--r-- | resources/flashrom/patch/flashchips.c_lenovobios_sst | 14660 | ||||
-rw-r--r-- | resources/flashrom/patch/flashchips.c_normal | 14586 |
9 files changed, 391 insertions, 43922 deletions
diff --git a/builddeps-flashrom b/builddeps-flashrom index 4e973b1e..1765e4b1 100755 --- a/builddeps-flashrom +++ b/builddeps-flashrom @@ -27,22 +27,23 @@ set -u -e -v cd flashrom/ -# clean it first -make clean - -# default flashchips.c -mv flashchips.c flashchips.c_ - # build patched binary for libreboot X60/T60 (MX25L1605D chip) # - this patch removes redundant definitions from flashchips.c # - this patch removes the need to use the -c parameter in flashrom # build patched binaries for MX25L1605D and SST25VF016B flash chips # - these patches are needed for initial installation on an X60 or T60 # - these patches are for people who have lenovo bios running -for patchname in "_normal" "_lenovobios_macronix" "_lenovobios_sst" +for patchname in "normal" "lenovobios_macronix" "lenovobios_sst" do - cp ../resources/flashrom/patch/flashchips.c"$patchname" flashchips.c - rm -f flashrom"$patchname" + # first remove the existing build + make clean + rm -f flashrom_"$patchname" + + # backup the unpatched flashchips.c (it will be patched) + cp flashchips.c flashchips.c_ + # patch flashchips.c + patch flashchips.c < ../resources/flashrom/patch/flashchips.c.diff."$patchname" + if (( $# != 1 )); then # build it dynamically linked make @@ -50,14 +51,17 @@ do # build it statically linked make SHARED=0 CC='gcc -static' fi - mv flashrom flashrom"$patchname" + + # Rename the binary based on the patch name + mv flashrom flashrom_"$patchname" + + # restore unpatched flashchips.c rm -f flashchips.c + mv flashchips.c_ flashchips.c done +# flashrom normal should actually be considered the default mv flashrom_normal flashrom -# default flashchips.c -mv flashchips.c_ flashchips.c - cd ../ # ------------------- DONE ---------------------- diff --git a/getflashrom b/getflashrom index c3d59cf3..23d0562b 100755 --- a/getflashrom +++ b/getflashrom @@ -33,7 +33,7 @@ rm -rf flashrom # --------------------------------------------------------------------- # download it using subversion -svn co -r 1854 svn://flashrom.org/flashrom/trunk flashrom +svn co -r 1858 svn://flashrom.org/flashrom/trunk flashrom # there are no permanent patches needed to be applied here: # the patches are applied selectively at build time (when running "builddeps-flashrom") diff --git a/resources/flashrom/patch/COPYING b/resources/flashrom/patch/COPYING deleted file mode 100644 index e9b0d029..00000000 --- a/resources/flashrom/patch/COPYING +++ /dev/null @@ -1,2 +0,0 @@ -These files are from and part of the flashrom (http://flashrom.org/) project. -Check the flashrom project's copyright information to see what conditions these files fall under. diff --git a/resources/flashrom/patch/flashchips.c.diff.lenovobios_macronix b/resources/flashrom/patch/flashchips.c.diff.lenovobios_macronix new file mode 100644 index 00000000..9cdedcc6 --- /dev/null +++ b/resources/flashrom/patch/flashchips.c.diff.lenovobios_macronix @@ -0,0 +1,148 @@ +--- flashchips.c 2014-12-14 11:05:12.512662091 +0000 ++++ flashchips.c.patch.i945_lenovobios_macronix 2014-12-14 11:16:51.224126814 +0000 +@@ -6602,89 +6602,15 @@ + + { + .vendor = "Macronix", +- .name = "MX25L1605", +- .bustype = BUS_SPI, +- .manufacture_id = MACRONIX_ID, +- .model_id = MACRONIX_MX25L1605, +- .total_size = 2048, +- .page_size = 256, +- .feature_bits = FEATURE_WRSR_WREN, +- .tested = TEST_OK_PREW, +- .probe = probe_spi_rdid, +- .probe_timing = TIMING_ZERO, +- .block_erasers = +- { +- { +- .eraseblocks = { {64 * 1024, 32} }, +- .block_erase = spi_block_erase_20, +- }, { +- .eraseblocks = { {64 * 1024, 32} }, +- .block_erase = spi_block_erase_d8, +- }, { +- .eraseblocks = { {2 * 1024 * 1024, 1} }, +- .block_erase = spi_block_erase_60, +- }, { +- .eraseblocks = { {2 * 1024 * 1024, 1} }, +- .block_erase = spi_block_erase_c7, +- }, +- }, +- .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit6: error flag */ +- .unlock = spi_disable_blockprotect, +- .write = spi_chip_write_256, +- .read = spi_chip_read, /* Fast read (0x0B) supported */ +- .voltage = {2700, 3600}, +- }, +- +- { +- .vendor = "Macronix", +- .name = "MX25L1605A/MX25L1606E", +- .bustype = BUS_SPI, +- .manufacture_id = MACRONIX_ID, +- .model_id = MACRONIX_MX25L1605, +- .total_size = 2048, +- .page_size = 256, +- /* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L1606E only) */ +- .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, +- .tested = TEST_OK_PREW, +- .probe = probe_spi_rdid, +- .probe_timing = TIMING_ZERO, +- .block_erasers = +- { +- { +- .eraseblocks = { {4 * 1024, 512} }, +- .block_erase = spi_block_erase_20, +- }, { +- .eraseblocks = { {64 * 1024, 32} }, +- .block_erase = spi_block_erase_52, +- }, { +- .eraseblocks = { {64 * 1024, 32} }, +- .block_erase = spi_block_erase_d8, +- }, { +- .eraseblocks = { {2 * 1024 * 1024, 1} }, +- .block_erase = spi_block_erase_60, +- }, { +- .eraseblocks = { {2 * 1024 * 1024, 1} }, +- .block_erase = spi_block_erase_c7, +- }, +- }, +- .printlock = spi_prettyprint_status_register_bp3_srwd, /* MX25L1605A bp2 only */ +- .unlock = spi_disable_blockprotect, +- .write = spi_chip_write_256, +- .read = spi_chip_read, /* Fast read (0x0B) supported */ +- .voltage = {2700, 3600}, +- }, +- +- { +- .vendor = "Macronix", + .name = "MX25L1605D/MX25L1608D/MX25L1673E", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, +- .model_id = MACRONIX_MX25L1605, ++ .model_id = 0x14, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_WREN, + .tested = TEST_OK_PREW, +- .probe = probe_spi_rdid, ++ .probe = probe_spi_res1, + .probe_timing = TIMING_ZERO, + .block_erasers = + { +@@ -6704,7 +6630,7 @@ + }, + .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: Continuously Program (CP) mode */ + .unlock = spi_disable_blockprotect, +- .write = spi_chip_write_256, ++ .write = spi_chip_write_1, + .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ + .voltage = {2700, 3600}, + }, +@@ -11141,44 +11067,6 @@ + .unlock = spi_disable_blockprotect, + .write = spi_aai_write, + .read = spi_chip_read, +- .voltage = {2700, 3600}, +- }, +- +- { +- .vendor = "SST", +- .name = "SST25VF016B", +- .bustype = BUS_SPI, +- .manufacture_id = SST_ID, +- .model_id = SST_SST25VF016B, +- .total_size = 2048, +- .page_size = 256, +- .feature_bits = FEATURE_WRSR_EITHER, +- .tested = TEST_OK_PREW, +- .probe = probe_spi_rdid, +- .probe_timing = TIMING_ZERO, +- .block_erasers = +- { +- { +- .eraseblocks = { {4 * 1024, 512} }, +- .block_erase = spi_block_erase_20, +- }, { +- .eraseblocks = { {32 * 1024, 64} }, +- .block_erase = spi_block_erase_52, +- }, { +- .eraseblocks = { {64 * 1024, 32} }, +- .block_erase = spi_block_erase_d8, +- }, { +- .eraseblocks = { {2 * 1024 * 1024, 1} }, +- .block_erase = spi_block_erase_60, +- }, { +- .eraseblocks = { {2 * 1024 * 1024, 1} }, +- .block_erase = spi_block_erase_c7, +- }, +- }, +- .printlock = spi_prettyprint_status_register_sst25vf016, +- .unlock = spi_disable_blockprotect, +- .write = spi_aai_write, +- .read = spi_chip_read, + .voltage = {2700, 3600}, + }, + diff --git a/resources/flashrom/patch/flashchips.c.diff.lenovobios_sst b/resources/flashrom/patch/flashchips.c.diff.lenovobios_sst new file mode 100644 index 00000000..aa6c97da --- /dev/null +++ b/resources/flashrom/patch/flashchips.c.diff.lenovobios_sst @@ -0,0 +1,142 @@ +--- flashchips.c 2014-12-14 11:05:12.512662091 +0000 ++++ flashchips.c.patch.i945_lenovobios_sst 2014-12-14 11:11:27.790522994 +0000 +@@ -6602,115 +6602,6 @@ + + { + .vendor = "Macronix", +- .name = "MX25L1605", +- .bustype = BUS_SPI, +- .manufacture_id = MACRONIX_ID, +- .model_id = MACRONIX_MX25L1605, +- .total_size = 2048, +- .page_size = 256, +- .feature_bits = FEATURE_WRSR_WREN, +- .tested = TEST_OK_PREW, +- .probe = probe_spi_rdid, +- .probe_timing = TIMING_ZERO, +- .block_erasers = +- { +- { +- .eraseblocks = { {64 * 1024, 32} }, +- .block_erase = spi_block_erase_20, +- }, { +- .eraseblocks = { {64 * 1024, 32} }, +- .block_erase = spi_block_erase_d8, +- }, { +- .eraseblocks = { {2 * 1024 * 1024, 1} }, +- .block_erase = spi_block_erase_60, +- }, { +- .eraseblocks = { {2 * 1024 * 1024, 1} }, +- .block_erase = spi_block_erase_c7, +- }, +- }, +- .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit6: error flag */ +- .unlock = spi_disable_blockprotect, +- .write = spi_chip_write_256, +- .read = spi_chip_read, /* Fast read (0x0B) supported */ +- .voltage = {2700, 3600}, +- }, +- +- { +- .vendor = "Macronix", +- .name = "MX25L1605A/MX25L1606E", +- .bustype = BUS_SPI, +- .manufacture_id = MACRONIX_ID, +- .model_id = MACRONIX_MX25L1605, +- .total_size = 2048, +- .page_size = 256, +- /* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L1606E only) */ +- .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, +- .tested = TEST_OK_PREW, +- .probe = probe_spi_rdid, +- .probe_timing = TIMING_ZERO, +- .block_erasers = +- { +- { +- .eraseblocks = { {4 * 1024, 512} }, +- .block_erase = spi_block_erase_20, +- }, { +- .eraseblocks = { {64 * 1024, 32} }, +- .block_erase = spi_block_erase_52, +- }, { +- .eraseblocks = { {64 * 1024, 32} }, +- .block_erase = spi_block_erase_d8, +- }, { +- .eraseblocks = { {2 * 1024 * 1024, 1} }, +- .block_erase = spi_block_erase_60, +- }, { +- .eraseblocks = { {2 * 1024 * 1024, 1} }, +- .block_erase = spi_block_erase_c7, +- }, +- }, +- .printlock = spi_prettyprint_status_register_bp3_srwd, /* MX25L1605A bp2 only */ +- .unlock = spi_disable_blockprotect, +- .write = spi_chip_write_256, +- .read = spi_chip_read, /* Fast read (0x0B) supported */ +- .voltage = {2700, 3600}, +- }, +- +- { +- .vendor = "Macronix", +- .name = "MX25L1605D/MX25L1608D/MX25L1673E", +- .bustype = BUS_SPI, +- .manufacture_id = MACRONIX_ID, +- .model_id = MACRONIX_MX25L1605, +- .total_size = 2048, +- .page_size = 256, +- .feature_bits = FEATURE_WRSR_WREN, +- .tested = TEST_OK_PREW, +- .probe = probe_spi_rdid, +- .probe_timing = TIMING_ZERO, +- .block_erasers = +- { +- { +- .eraseblocks = { {4 * 1024, 512} }, +- .block_erase = spi_block_erase_20, +- }, { +- .eraseblocks = { {64 * 1024, 32} }, +- .block_erase = spi_block_erase_d8, +- }, { +- .eraseblocks = { {2 * 1024 * 1024, 1} }, +- .block_erase = spi_block_erase_60, +- }, { +- .eraseblocks = { {2 * 1024 * 1024, 1} }, +- .block_erase = spi_block_erase_c7, +- }, +- }, +- .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: Continuously Program (CP) mode */ +- .unlock = spi_disable_blockprotect, +- .write = spi_chip_write_256, +- .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ +- .voltage = {2700, 3600}, +- }, +- +- { +- .vendor = "Macronix", + .name = "MX25L1635D", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, +@@ -11149,12 +11040,12 @@ + .name = "SST25VF016B", + .bustype = BUS_SPI, + .manufacture_id = SST_ID, +- .model_id = SST_SST25VF016B, ++ .model_id = 0x41, + .total_size = 2048, + .page_size = 256, + .feature_bits = FEATURE_WRSR_EITHER, + .tested = TEST_OK_PREW, +- .probe = probe_spi_rdid, ++ .probe = probe_spi_res2, + .probe_timing = TIMING_ZERO, + .block_erasers = + { +@@ -11177,7 +11068,7 @@ + }, + .printlock = spi_prettyprint_status_register_sst25vf016, + .unlock = spi_disable_blockprotect, +- .write = spi_aai_write, ++ .write = spi_chip_write_1, + .read = spi_chip_read, + .voltage = {2700, 3600}, + }, diff --git a/resources/flashrom/patch/flashchips.c.diff.normal b/resources/flashrom/patch/flashchips.c.diff.normal new file mode 100644 index 00000000..9a089962 --- /dev/null +++ b/resources/flashrom/patch/flashchips.c.diff.normal @@ -0,0 +1,83 @@ +--- flashchips.c 2014-12-14 11:05:12.512662091 +0000 ++++ flashchips.c.patch.normal 2014-12-14 11:11:50.962637898 +0000 +@@ -6602,80 +6602,6 @@ + + { + .vendor = "Macronix", +- .name = "MX25L1605", +- .bustype = BUS_SPI, +- .manufacture_id = MACRONIX_ID, +- .model_id = MACRONIX_MX25L1605, +- .total_size = 2048, +- .page_size = 256, +- .feature_bits = FEATURE_WRSR_WREN, +- .tested = TEST_OK_PREW, +- .probe = probe_spi_rdid, +- .probe_timing = TIMING_ZERO, +- .block_erasers = +- { +- { +- .eraseblocks = { {64 * 1024, 32} }, +- .block_erase = spi_block_erase_20, +- }, { +- .eraseblocks = { {64 * 1024, 32} }, +- .block_erase = spi_block_erase_d8, +- }, { +- .eraseblocks = { {2 * 1024 * 1024, 1} }, +- .block_erase = spi_block_erase_60, +- }, { +- .eraseblocks = { {2 * 1024 * 1024, 1} }, +- .block_erase = spi_block_erase_c7, +- }, +- }, +- .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit6: error flag */ +- .unlock = spi_disable_blockprotect, +- .write = spi_chip_write_256, +- .read = spi_chip_read, /* Fast read (0x0B) supported */ +- .voltage = {2700, 3600}, +- }, +- +- { +- .vendor = "Macronix", +- .name = "MX25L1605A/MX25L1606E", +- .bustype = BUS_SPI, +- .manufacture_id = MACRONIX_ID, +- .model_id = MACRONIX_MX25L1605, +- .total_size = 2048, +- .page_size = 256, +- /* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L1606E only) */ +- .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, +- .tested = TEST_OK_PREW, +- .probe = probe_spi_rdid, +- .probe_timing = TIMING_ZERO, +- .block_erasers = +- { +- { +- .eraseblocks = { {4 * 1024, 512} }, +- .block_erase = spi_block_erase_20, +- }, { +- .eraseblocks = { {64 * 1024, 32} }, +- .block_erase = spi_block_erase_52, +- }, { +- .eraseblocks = { {64 * 1024, 32} }, +- .block_erase = spi_block_erase_d8, +- }, { +- .eraseblocks = { {2 * 1024 * 1024, 1} }, +- .block_erase = spi_block_erase_60, +- }, { +- .eraseblocks = { {2 * 1024 * 1024, 1} }, +- .block_erase = spi_block_erase_c7, +- }, +- }, +- .printlock = spi_prettyprint_status_register_bp3_srwd, /* MX25L1605A bp2 only */ +- .unlock = spi_disable_blockprotect, +- .write = spi_chip_write_256, +- .read = spi_chip_read, /* Fast read (0x0B) supported */ +- .voltage = {2700, 3600}, +- }, +- +- { +- .vendor = "Macronix", + .name = "MX25L1605D/MX25L1608D/MX25L1673E", + .bustype = BUS_SPI, + .manufacture_id = MACRONIX_ID, diff --git a/resources/flashrom/patch/flashchips.c_lenovobios_macronix b/resources/flashrom/patch/flashchips.c_lenovobios_macronix deleted file mode 100644 index 81b927f5..00000000 --- a/resources/flashrom/patch/flashchips.c_lenovobios_macronix +++ /dev/null @@ -1,14660 +0,0 @@ -/* - * This file is part of the flashrom project. - * - * Copyright (C) 2000 Silicon Integrated System Corporation - * Copyright (C) 2004 Tyan Corp - * Copyright (C) 2005-2008 coresystems GmbH <stepan@openbios.org> - * Copyright (C) 2006-2009 Carl-Daniel Hailfinger - * Copyright (C) 2009 Sean Nelson <audiohacked@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "flash.h" -#include "flashchips.h" -#include "chipdrivers.h" - -/** - * List of supported flash chips. - * - * Please keep the list sorted by vendor name and chip family, so that the output of 'flashrom -L' is roughly - * alphabetically sorted. Within families keep them in order of density. - */ -const struct flashchip flashchips[] = { - - /* - * .vendor = Vendor name - * .name = Chip name - * .bustype = Supported flash bus types (Parallel, LPC...) - * .manufacture_id = Manufacturer chip ID - * .model_id = Model chip ID - * .total_size = Total size in (binary) kbytes - * .page_size = Page or eraseblock(?) size in bytes - * .tested = Test status - * .probe = Probe function - * .probe_timing = Probe function delay - * .block_erasers[] = Array of erase layouts and erase functions - * { - * .eraseblocks[] = Array of { blocksize, blockcount } - * .block_erase = Block erase function - * } - * .printlock = Chip lock status function - * .unlock = Chip unlock function - * .write = Chip write function - * .read = Chip read function - * .voltage = Voltage range in millivolt - */ - - { - .vendor = "AMD", - .name = "Am29F010A/B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29F010B, /* Same as Am29F010A */ - .total_size = 128, - .page_size = 16 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {16 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMD", - .name = "Am29F002(N)BB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29F002BB, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_SHORT_RESET | FEATURE_ADDR_2AA, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ - }, - - { - .vendor = "AMD", - .name = "Am29F002(N)BT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29F002BT, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_EITHER_RESET | FEATURE_ADDR_2AA, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ - }, - - { - .vendor = "AMD", - .name = "Am29F016D", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29F016D, - .total_size = 2 * 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMD", - .name = "Am29F040B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29F040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMD", - .name = "Am29F080B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29F080B, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMD", - .name = "Am29LV001BB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV001BB, - .total_size = 128, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 1}, - {4 * 1024, 2}, - {16 * 1024, 7}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -45R, others 2.7-3.6V */ - }, - - { - .vendor = "AMD", - .name = "Am29LV001BT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV001BT, - .total_size = 128, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 7}, - {4 * 1024, 2}, - {8 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -45R, others 2.7-3.6V */ - }, - - { - .vendor = "AMD", - .name = "Am29LV002BB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV002BB, - .total_size = 256, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -55, others 2.7-3.6V */ - }, - - { - .vendor = "AMD", - .name = "Am29LV002BT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV002BT, - .total_size = 256, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -55, others 2.7-3.6V */ - }, - - { - .vendor = "AMD", - .name = "Am29LV004BB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV004BB, - .total_size = 512, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 7}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMD", - .name = "Am29LV004BT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV004BT, - .total_size = 512, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMD", - .name = "Am29LV008BB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV008BB, - .total_size = 1024, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 15}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600} /* 3.0-3.6V for type -70R, others 2.7-3.6V */ - }, - - { - .vendor = "AMD", - .name = "Am29LV008BT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV008BT, - .total_size = 1024, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 15}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600} /* 3.0-3.6V for type -70R, others 2.7-3.6V */ - }, - - { - .vendor = "AMD", - .name = "Am29LV040B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -60R, others 2.7-3.6V*/ - }, - - { - .vendor = "AMD", - .name = "Am29LV081B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV080B, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, /* datasheet specifies address as don't care */ - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -70R, others 2.7-3.6V */ - }, - - { - .vendor = "AMIC", - .name = "A25L05PT", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L05PT, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L05PU", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L05PU, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L10PT", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L10PT, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 1}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L10PU", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L10PU, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 1}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L20PT", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L20PT, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L20PU", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L20PU, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - /* The A25L40P{T,U} chips are distinguished by their - * erase block layouts, but without any distinction in RDID. - * This inexplicable quirk was verified by Rudolf Marek - * and discussed on the flashrom mailing list on 2010-07-12. - */ - { - .vendor = "AMIC", - .name = "A25L40PT", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L40PT, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L40PU", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L40PU, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 7}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L80P", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L80P, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PRE, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 15}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L16PT", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L16PT, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 31}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L16PU", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L16PU, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 31}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L512", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L512, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 16 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 1 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 64 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L010", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L010, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 32 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 2 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 128 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L020", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L020, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 64 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 4 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 256 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L040", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L040, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 128 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 8 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 512 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L080", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L080, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 256 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 16 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 1024 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L016", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L016, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 512 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 32 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 2048 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L032", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L032, - .total_size = 4096, - .page_size = 256, - /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 1024 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 64 } }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { { 64 * 1024, 64 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 4096 * 1024, 1 } }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 4096 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25LQ16", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25LQ16, - .total_size = 2048, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { { 4 * 1024, 512 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 32 } }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { { 64 * 1024, 32 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 2048 * 1024, 1 } }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 2048 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25LQ032/A25LQ32A", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25LQ032, - .total_size = 4096, - .page_size = 256, - /* A25LQ32A supports SFDP */ - /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 1024 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 64 } }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { { 64 * 1024, 64 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 4096 * 1024, 1 } }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 4096 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25LQ64", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25LQ032, - .total_size = 8192, - .page_size = 256, - /* supports SFDP */ - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - /* QPI enable 0x35, disable 0xF5 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 2048 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 32 * 1024, 256 } }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { { 64 * 1024, 128 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 8192 * 1024, 1 } }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 8192 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enhance (sic!) */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A29002B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A29002B, - .total_size = 256, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMIC", - .name = "A29002T", - .bustype = BUS_PARALLEL, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A29002T, - .total_size = 256, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMIC", - .name = "A29040B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A29040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMIC", - .name = "A49LF040A", - .bustype = BUS_LPC, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A49LF040A, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25DF021", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF021, - .total_size = 256, - .page_size = 256, - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, /* 2.3-3.6V & 2.7-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT25DF041A", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF041A, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, /* 2.3-3.6V & 2.7-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT25DF081", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF081, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1600, 2000}, /* Datasheet says range is 1.65-1.95 V */ - }, - - { - .vendor = "Atmel", - .name = "AT25DF081A", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF081A, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25DF161", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF161, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PROBE, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25DF321", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF321, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25DF321A", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF321A, - .total_size = 4096, - .page_size = 256, - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25DF641(A)", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF641, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25DL081", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF081, - .total_size = 1024, - .page_size = 256, - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, /* Dual I/O (0xA2) supported */ - .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "Atmel", - .name = "AT25DL161", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DL161, - .total_size = 2048, - .page_size = 256, - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, /* Dual I/O (0xA2) supported */ - .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "Atmel", - .name = "AT25DQ161", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DQ161, - .total_size = 2048, - .page_size = 256, - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25F512", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F512, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_at25f, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_62, - } - }, - .printlock = spi_prettyprint_status_register_at25f, - .unlock = spi_disable_blockprotect_at25f, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25F512A", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F512A, - .total_size = 64, - .page_size = 128, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_at25f, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_62, - } - }, - .printlock = spi_prettyprint_status_register_at25f512a, - /* FIXME: It is not correct to use this one, because the BP1 bit is N/A. */ - .unlock = spi_disable_blockprotect_at25f512a, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25F512B", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F512B, - .total_size = 64, - .page_size = 256, - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_62, - } - }, - .printlock = spi_prettyprint_status_register_at25f512b, - .unlock = spi_disable_blockprotect_at25f512b, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - /* The A suffix indicates 33MHz instead of 20MHz clock rate. - * All other properties seem to be the same.*/ - .name = "AT25F1024(A)", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F1024, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_at25f, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_62, - } - }, - .printlock = spi_prettyprint_status_register_at25f, - .unlock = spi_disable_blockprotect_at25f, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25F2048", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F2048, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_at25f, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_62, - } - }, - .printlock = spi_prettyprint_status_register_at25f, - .unlock = spi_disable_blockprotect_at25f, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25F4096", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F4096, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_at25f, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_62, - } - }, - .printlock = spi_prettyprint_status_register_at25f4096, - /* "Bits 5-6 are 0s when device is not in an internal write cycle." Better leave them alone: */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25FS010", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25FS010, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25fs010, - .unlock = spi_disable_blockprotect_at25fs010, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25FS040", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25FS040, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25fs040, - .unlock = spi_disable_blockprotect_at25fs040, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT26DF041", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT26DF041, - .total_size = 512, - .page_size = 256, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 2048} }, - .block_erase = spi_block_erase_81, - }, { - .eraseblocks = { {2 * 1024, 256} }, - .block_erase = spi_block_erase_50, - }, { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - } - }, - .printlock = spi_prettyprint_status_register_plain, - /* Supports also an incompatible page write (of exactly 256 B) and an auto-erasing write. */ - .write = spi_chip_write_1, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, /* 3.0-3.6V for higher speed, 2.7-3.6V normal */ - }, - - { - .vendor = "Atmel", - .name = "AT26DF081A", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT26DF081A, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at26df081a, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT26DF161", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT26DF161, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT26DF161A", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT26DF161A, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at26df081a, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - /*The AT26DF321 has the same ID as the AT25DF321. */ - /*{ - .vendor = "Atmel", - .name = "AT26DF321", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT26DF321, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .printlock = spi_prettyprint_status_register_at26df081a, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - },*/ - - { - .vendor = "Atmel", - .name = "AT26F004", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT26F004, - .total_size = 512, - .page_size = 256, - .tested = {.probe = NT, .read = NT, .erase = NT, .write = BAD }, - .feature_bits = FEATURE_WRSR_WREN, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .write = NULL /* Incompatible Page write */, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT29C512", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT29C512, - .total_size = 64, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10000, /* 10mS, Enter=Exec */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT29C010A", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT29C010A, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = 10000, /* 10mS, Enter=Exec */ - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, /* FIXME */ - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT29C020", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT29C020, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10000, /* 10ms */ - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT29C040A", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT29C040A, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10000, /* 10 ms */ - .block_erasers = - { - { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT45CS1282", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45CS1282, - .total_size = 16896 /* No power of two sizes */, - .page_size = 1056 /* No power of two sizes */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77 (4 dummy bytes); write 0x9A (via buffer) */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1056, 1}, /* sector 0a: opcode 50h */ - {248 * 1056, 1}, /* sector 0b: opcode 7Ch */ - {256 * 1056, 63}, /* sectors 1 - 63: opcode 7Ch */ - }, - .block_erase = spi_erase_at45cs_sector, - } - }, - .printlock = spi_prettyprint_status_register_plain, - .gran = write_gran_1056bytes, - .write = spi_write_at45db, - .read = spi_read_at45db, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT45DB011D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB011D, - .total_size = 128 /* or 132, determined from status register */, - .page_size = 256 /* or 264, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 512} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 256, 512/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 256, 1}, - {120 * 256, 1}, - {128 * 256, 3}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT45DB021D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB021D, - .total_size = 256 /* or 264, determined from status register */, - .page_size = 256 /* or 264, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 1024} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 256, 1024/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 256, 1}, - {120 * 256, 1}, - {128 * 256, 7}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT45DB041D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB041D, - .total_size = 512 /* or 528, determined from status register */, - .page_size = 256 /* or 264, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 2048} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 256, 2048/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 256, 1}, - {248 * 256, 1}, - {256 * 256, 7}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT45DB081D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB081D, - .total_size = 1024 /* or 1056, determined from status register */, - .page_size = 256 /* or 264, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 4096} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 256, 4096/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 256, 1}, - {248 * 256, 1}, - {256 * 256, 15}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT45DB161D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB161D, - .total_size = 2048 /* or 2112, determined from status register */, - .page_size = 512 /* or 528, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 4096} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 512, 4096/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 512, 1}, - {248 * 512, 1}, - {256 * 512, 15}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT45DB321C", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB321C, - .total_size = 4224 /* No power of two sizes */, - .page_size = 528 /* No power of two sizes */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77 (4 dummy bytes); write 0x9A (via buffer) */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {528, 8192} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 528, 8192/8} }, - .block_erase = spi_erase_at45db_block, - }, /* Although the datasheets describes sectors (which can be write protected) - * there seems to be no erase functions for them. - { - .eraseblocks = { - {8 * 528, 1}, - {120 * 528, 1}, - {128 * 528, 63}, - }, - .block_erase = spi_erase_at45db_sector - }, */ { - .eraseblocks = { {4224 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .printlock = spi_prettyprint_status_register_at45db, /* Bit 0 is undefined, no lockdown */ - .gran = write_gran_528bytes, - .write = spi_write_at45db, - .read = spi_read_at45db_e8, /* 3 address and 4 dummy bytes */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT45DB321D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB321D, - .total_size = 4096 /* or 4224, determined from status register */, - .page_size = 512 /* or 528, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 8192} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 512, 8192/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 512, 1}, - {120 * 512, 1}, - {128 * 512, 63}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {4096 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT45DB321E", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB321C, - .total_size = 4096 /* or 4224, determined from status register */, - .page_size = 512 /* or 528, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 8192} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 512, 8192/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 512, 1}, - {120 * 512, 1}, - {128 * 512, 63}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {4096 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, /* has a 2nd status register */ - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2500, 3600}, /* 2.3-3.6V & 2.5-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT45DB642D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB642D, - .total_size = 8192 /* or 8448, determined from status register */, - .page_size = 1024 /* or 1056, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {1024, 8192} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 1024, 8192/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 1024, 1}, - {248 * 1024, 1}, - {256 * 1024, 31}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {8192 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT49BV512", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49BV512, - .total_size = 64, - .page_size = 64, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT49F002(N)", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F002N, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {96 * 1024, 1}, - {128 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT49F002(N)T", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F002NT, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 1}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT49(H)F010", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F010, - .total_size = 128, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_at49f, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT49F020", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F020, - .total_size = 256, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - /* Chip features an optional permanent write protection - * of the first 8 kB. The erase function is the same as - * above, but 00000H to 01FFFH will not be erased. - * FIXME: add another eraser when partial erasers are - * supported. - */ - }, - .printlock = printlock_at49f, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT49F040", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F040, - .total_size = 512, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - /* Chip features an optional permanent write protection - * of the first 16 kB. The erase function is the same as - * above, but 00000H to 03FFFH will not be erased. - * FIXME: add another eraser when partial erasers are - * supported. - */ - }, - .printlock = printlock_at49f, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT49F080", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F080, - .total_size = 1024, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - /* Chip features an optional permanent write protection - * of the first 16 kB. The erase function is the same as - * above, but 00000H to 03FFFH will not be erased. - * FIXME: add another eraser when partial erasers are - * supported. - */ - }, - .printlock = printlock_at49f, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - /* 'top' version of AT49F080. equal in all aspects but the boot block address */ - .vendor = "Atmel", - .name = "AT49F080T", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F080T, - .total_size = 1024, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - /* Chip features an optional permanent write protection - * of the first 16 kB. The erase function is the same as - * above, but FC000H to FFFFFH will not be erased. - * FIXME: add another eraser when partial erasers are - * supported. - */ - }, - .printlock = printlock_at49f, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT49LH002", - .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49LH002, - .total_size = 256, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = NULL, /* TODO: Implement. */ - }, { - .eraseblocks = { - {64 * 1024, 4}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT49LH00B4", - .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49LH00B4, - .total_size = 512, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 2}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 7}, - }, - .block_erase = NULL, /* TODO: Implement. */ - }, { - .eraseblocks = { - {64 * 1024, 8}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT49LH004", - .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49LH004, - .total_size = 512, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, { - .eraseblocks = { - {64 * 1024, 8}, - }, - .block_erase = NULL, /* TODO: Implement. */ - }, - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Catalyst", - .name = "CAT28F512", - .bustype = BUS_PARALLEL, - .manufacture_id = CATALYST_ID, - .model_id = CATALYST_CAT28F512, - .total_size = 64, - .page_size = 0, /* unused */ - .feature_bits = 0, - .tested = {.probe = OK, .read = OK, .erase = BAD, .write = BAD }, - .probe = probe_jedec, /* FIXME! */ - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = NULL, /* TODO */ - }, - }, - .write = NULL, /* TODO */ - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Bright", - .name = "BM29F040", - .bustype = BUS_PARALLEL, - .manufacture_id = BRIGHT_ID, - .model_id = BRIGHT_BM29F040, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "ESMT", - .name = "F49B002UA", - .bustype = BUS_PARALLEL, - .manufacture_id = ESMT_ID, - .model_id = ESMT_F49B002UA, - .total_size = 256, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 1}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "ESMT", - .name = "F25L008A", - .bustype = BUS_SPI, - .manufacture_id = ESMT_ID, - .model_id = ESMT_F25L008A, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ESMT", - .name = "F25L32PA", - .bustype = BUS_SPI, - .manufacture_id = ESMT_ID, - .model_id = ESMT_F25L32PA, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_bpl, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B05", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B05, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B05T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B05, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B10", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 3}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B10T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {32 * 1024, 3}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B20", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 3} - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B20T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B40", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 7} - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B40T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B80", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 15} - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B80T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 15}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B16", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 31}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B16T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 31}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B32", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B32, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 63}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B32T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B32, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 63}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B64", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B64, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 127}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B64T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B64, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 127}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F05", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F05, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F10", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F20", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F40", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PROBE, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F80", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F16", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F32", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F32, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F64", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F64, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25Q40", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q40, - .total_size = 512, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25Q80(A)", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q80, - .total_size = 1024, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - /* Note: EN25D16 is an evil twin which shares the model ID - but has different write protection capabilities */ - .vendor = "Eon", - .name = "EN25Q16", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q16, - .total_size = 2048, - .page_size = 256, - /* OTP: D16 512B/Q16 128B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - /* not supported by Q16 version */ - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25Q32(A/B)", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q32, - .total_size = 4096, - .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25Q64", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q64, - .total_size = 8192, - .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25Q128", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q128, - .total_size = 16384, - .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - }, - - { - .vendor = "Eon", - .name = "EN25QH16", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25QH16, - .total_size = 2048, - .page_size = 256, - /* supports SFDP */ - /* OTP: 512B total; enter 0x3A */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 2048, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 2048, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25QH32", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25QH32, - .total_size = 4096, - .page_size = 256, - /* supports SFDP */ - /* OTP: 512B total; enter 0x3A */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 4096, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 4096, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25QH64", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25QH64, - .total_size = 8192, - .page_size = 256, - /* supports SFDP */ - /* OTP: 512B total; enter 0x3A */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 8192 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 8192 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25QH128", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25QH128, - .total_size = 16384, - .page_size = 256, - /* supports SFDP */ - /* OTP: 512B total; enter 0x3A */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25S10", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S10, - .total_size = 128, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN25S20", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S20, - .total_size = 256, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN25S40", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S40, - .total_size = 512, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN25S80", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S80, - .total_size = 1024, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN25S16", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S16, - .total_size = 2048, - .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_en25s_wp, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN25S32", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S32, - .total_size = 4096, - .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4096 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4096 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_en25s_wp, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN25S64", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S64, - .total_size = 8192, - .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8192 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8192 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_en25s_wp, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN29F010", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29F010, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {16 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Eon", - .name = "EN29F002(A)(N)B", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29F002B, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Eon", - .name = "EN29F002(A)(N)T", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29F002T, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Eon", - .name = "EN29LV640B", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29LV640B, - .total_size = 8192, - .page_size = 8192, - .feature_bits = FEATURE_ADDR_SHIFTED, - .tested = TEST_OK_PREW, - .probe = probe_en29lv640b, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127}, - }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_en29lv640b, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN29GL064(A)B", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29GL064B, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN29GL064(A)T", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29GL064T, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 127}, - {8 * 1024, 8}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN29GL064H/L", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29GL064HL, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN29GL128", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29GL128HL, - .total_size = 16384, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Fujitsu", - .name = "MBM29F004BC", - .bustype = BUS_PARALLEL, - .manufacture_id = FUJITSU_ID, - .model_id = FUJITSU_MBM29F004BC, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 7}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = NULL, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Fujitsu", - .name = "MBM29F004TC", - .bustype = BUS_PARALLEL, - .manufacture_id = FUJITSU_ID, - .model_id = FUJITSU_MBM29F004TC, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = NULL, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - /* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */ - .vendor = "Fujitsu", - .name = "MBM29F400BC", - .bustype = BUS_PARALLEL, - .manufacture_id = FUJITSU_ID, - .model_id = FUJITSU_MBM29F400BC, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 7}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ - }, - - { - .vendor = "Fujitsu", - .name = "MBM29F400TC", - .bustype = BUS_PARALLEL, - .manufacture_id = FUJITSU_ID, - .model_id = FUJITSU_MBM29F400TC, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ - }, - - { - .vendor = "Fujitsu", - .name = "MBM29LV160BE", - .bustype = BUS_PARALLEL, - .manufacture_id = FUJITSU_ID, - .model_id = FUJITSU_MBM29LV160BE, - .total_size = 2 * 1024, - .page_size = 0, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 31}, - }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, /* Supports a fast mode too */ - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -70, others 2.7-3.6V */ - }, - - { - .vendor = "Fujitsu", - .name = "MBM29LV160TE", - .bustype = BUS_PARALLEL, - .manufacture_id = FUJITSU_ID, - .model_id = FUJITSU_MBM29LV160TE, - .total_size = 2 * 1024, - .page_size = 0, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 31}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, /* Supports a fast mode too */ - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -70, others 2.7-3.6V */ - }, - - { - .vendor = "GigaDevice", - .name = "GD25LQ32", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25LQ32, - .total_size = 4096, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q512", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q512, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q10", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q20(B)", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q40(B)", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q80(B)", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q80, - .total_size = 1024, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q16(B)", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q16, - .total_size = 2048, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q32(B)", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q32, - .total_size = 4096, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q64(B)", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q64, - .total_size = 8192, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q128B", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q128, - .total_size = 16384, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 512} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25T80", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25T80, - .total_size = 1024, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Hyundai", - .name = "HY29F002T", - .bustype = BUS_PARALLEL, - .manufacture_id = HYUNDAI_ID, - .model_id = HYUNDAI_HY29F002T, - .total_size = 256, - .page_size = 256 * 1024, - .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -45, others 4.5-5.5V */ - }, - - { - .vendor = "Hyundai", - .name = "HY29F002B", - .bustype = BUS_PARALLEL, - .manufacture_id = HYUNDAI_ID, - .model_id = HYUNDAI_HY29F002B, - .total_size = 256, - .page_size = 256 * 1024, - .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -45, others 4.5-5.5V */ - }, - - { - .vendor = "Hyundai", - .name = "HY29F040A", - .bustype = BUS_PARALLEL, - .manufacture_id = HYUNDAI_ID, - .model_id = HYUNDAI_HY29F040A, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Intel", - .name = "25F160S33B8", - .bustype = BUS_SPI, - .manufacture_id = INTEL_ID, - .model_id = INTEL_25F160S33B8, - .total_size = 2048, - .page_size = 256, - /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 8 so-called "parameter blocks" with - * opcode 0x40. Trying to access an address outside these 8 8kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 31} // inaccessible - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, - .unlock = spi_disable_blockprotect_bp2_ep_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* also fast read 0x0B */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Intel", - .name = "25F160S33T8", - .bustype = BUS_SPI, - .manufacture_id = INTEL_ID, - .model_id = INTEL_25F160S33T8, - .total_size = 2048, - .page_size = 256, - /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 8 so-called "parameter blocks" with - * opcode 0x40. Trying to access an address outside these 8 8kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {64 * 1024, 31}, // inaccessible - {8 * 1024, 8} - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, - .unlock = spi_disable_blockprotect_bp2_ep_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* also fast read 0x0B */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Intel", - .name = "25F320S33B8", - .bustype = BUS_SPI, - .manufacture_id = INTEL_ID, - .model_id = INTEL_25F320S33B8, - .total_size = 4096, - .page_size = 256, - /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 8 so-called "parameter blocks" with - * opcode 0x40. Trying to access an address outside these 8 8kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 63} // inaccessible - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, - .unlock = spi_disable_blockprotect_bp2_ep_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* also fast read 0x0B */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Intel", - .name = "25F320S33T8", - .bustype = BUS_SPI, - .manufacture_id = INTEL_ID, - .model_id = INTEL_25F320S33T8, - .total_size = 4096, - .page_size = 256, - /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 8 so-called "parameter blocks" with - * opcode 0x40. Trying to access an address outside these 8 8kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {64 * 1024, 63}, // inaccessible - {8 * 1024, 8} - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, - .unlock = spi_disable_blockprotect_bp2_ep_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* also fast read 0x0B */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Intel", - .name = "25F640S33B8", - .bustype = BUS_SPI, - .manufacture_id = INTEL_ID, - .model_id = INTEL_25F640S33B8, - .total_size = 8192, - .page_size = 256, - /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 8 so-called "parameter blocks" with - * opcode 0x40. Trying to access an address outside these 8 8kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127} // inaccessible - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, - .unlock = spi_disable_blockprotect_bp2_ep_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* also fast read 0x0B */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Intel", - .name = "25F640S33T8", - .bustype = BUS_SPI, - .manufacture_id = INTEL_ID, - .model_id = INTEL_25F640S33T8, - .total_size = 8192, - .page_size = 256, - /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 8 so-called "parameter blocks" with - * opcode 0x40. Trying to access an address outside these 8 8kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {64 * 1024, 127}, // inaccessible - {8 * 1024, 8} - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, - .unlock = spi_disable_blockprotect_bp2_ep_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* also fast read 0x0B */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Intel", - .name = "28F001BN/BX-B", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F001B, - .total_size = 128, - .page_size = 128 * 1024, /* 8k + 2x4k + 112k */ - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 1}, - {4 * 1024, 2}, - {112 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Intel", - .name = "28F001BN/BX-T", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F001T, - .total_size = 128, - .page_size = 128 * 1024, /* 112k + 2x4k + 8k */ - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {112 * 1024, 1}, - {4 * 1024, 2}, - {8 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Intel", - .name = "28F002BC/BL/BV/BX-T", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F002T, - .total_size = 256, - .page_size = 256 * 1024, - .tested = TEST_OK_PRE, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 1}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - }, - - { - .vendor = "Intel", - .name = "28F008S3/S5/SC", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F004S3, - .total_size = 512, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_82802ab, - }, - }, - .unlock = unlock_28f004s5, - .write = write_82802ab, - .read = read_memmapped, - }, - - { - .vendor = "Intel", - .name = "28F004B5/BE/BV/BX-B", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F004B, - .total_size = 512, - .page_size = 128 * 1024, /* maximal block size */ - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {96 * 1024, 1}, - {128 * 1024, 3}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - }, - - { - .vendor = "Intel", - .name = "28F004B5/BE/BV/BX-T", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F004T, - .total_size = 512, - .page_size = 128 * 1024, /* maximal block size */ - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 3}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - }, - - { - .vendor = "Intel", - .name = "28F400BV/BX/CE/CV-B", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F400B, - .total_size = 512, - .page_size = 128 * 1024, /* maximal block size */ - .feature_bits = FEATURE_ADDR_SHIFTED, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {96 * 1024, 1}, - {128 * 1024, 3}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - }, - - { - .vendor = "Intel", - .name = "28F400BV/BX/CE/CV-T", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F400T, - .total_size = 512, - .page_size = 128 * 1024, /* maximal block size */ - .feature_bits = FEATURE_ADDR_SHIFTED, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 3}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - }, - - { - .vendor = "Intel", - .name = "82802AB", - .bustype = BUS_FWH, - .manufacture_id = INTEL_ID, - .model_id = INTEL_82802AB, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_82802ab, - }, - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Intel", - .name = "82802AC", - .bustype = BUS_FWH, - .manufacture_id = INTEL_ID, - .model_id = INTEL_82802AC, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_82802ab, - }, - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "ISSI", - .name = "IS29GL064B", - .bustype = BUS_PARALLEL, - .manufacture_id = ISSI_ID, - .model_id = ISSI_PMC_IS29GL064B, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ISSI", - .name = "IS29GL064T", - .bustype = BUS_PARALLEL, - .manufacture_id = ISSI_ID, - .model_id = ISSI_PMC_IS29GL064T, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 127}, - {8 * 1024, 8}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ISSI", - .name = "IS29GL064H/L", - .bustype = BUS_PARALLEL, - .manufacture_id = ISSI_ID, - .model_id = ISSI_PMC_IS29GL064HL, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ISSI", - .name = "IS29GL128H/L", - .bustype = BUS_PARALLEL, - .manufacture_id = ISSI_ID, - .model_id = ISSI_PMC_IS29GL128HL, - .total_size = 16384, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX23L1654", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX23L1654, - .total_size = 2048, - .page_size = 256, - .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, /* MX23L1654 is a mask ROM, so it is read-only */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {3000, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX23L3254", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX23L3254, - .total_size = 4096, - .page_size = 256, - .tested = {.probe = OK, .read = OK, .erase = NA, .write = NA}, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, /* MX23L3254 is a mask ROM, so it is read-only */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {3000, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX23L6454", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX23L6454, - .total_size = 8192, - .page_size = 256, - .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, /* MX23L6454 is a mask ROM, so it is read-only */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {3000, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX23L12854", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX23L12854, - .total_size = 16384, - .page_size = 256, - .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, /* MX23L12854 is a mask ROM, so it is read-only */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {3000, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L512(E)/MX25V512(C)", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L512, - .total_size = 64, - .page_size = 256, - /* MX25L512E supports SFDP */ - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported, MX25L512E supports dual I/O */ - .voltage = {2700, 3600}, /* 2.35-3.6V for MX25V512(C) */ - }, - - { - .vendor = "Macronix", - .name = "MX25L1005(C)/MX25L1006E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L1005, - .total_size = 128, - .page_size = 256, - /* MX25L1006E supports SFDP */ - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported, MX25L1006E supports dual I/O */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L2005(C)", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L2005, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L4005(A/C)", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L4005, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L8005/MX25V8005", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L8005, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, /* 2.35-3.6V for MX25V8005 */ - }, - - { - .vendor = "Macronix", - .name = "MX25L1605", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L1605, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit6: error flag */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L1605A/MX25L1606E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L1605, - .total_size = 2048, - .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L1606E only) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* MX25L1605A bp2 only */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L1605D/MX25L1608D/MX25L1673E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = 0x14, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_res1, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: Continuously Program (CP) mode */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L1635D", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L1635D, - .total_size = 2048, - .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L1635E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L1635E, - .total_size = 2048, - .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L3205(A)", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L3205, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit6: error flag */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L3205D/MX25L3208D", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L3205, - .total_size = 4096, - .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: CP mode */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L3206E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L3205, - .total_size = 4096, - .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L3273E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L3205, - .total_size = 4096, - .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L3235D", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L3235D, - .total_size = 4096, - .page_size = 256, - /* OTP: 256B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L6405(D)", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L6405, - .total_size = 8192, - .page_size = 256, - /* MX25L6405D has 64B of OTP; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 has different meanings */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L6406E/MX25L6436E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L6405, - .total_size = 8192, - .page_size = 256, - /* OTP: 06E 64B/36E 512B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 for 36E is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L6445E/MX25L6473E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L6405, - .total_size = 8192, - .page_size = 256, - /* supports SFDP */ - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L12805(D)", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L12805, - .total_size = 16384, - .page_size = 256, - /* MX25L12805D has 64B of OTP; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* MX25L12805D: Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25U1635E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25U1635E, - .total_size = 2048, - .page_size = 256, - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - /* TODO: security register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1650, 2000}, - }, - - { - .vendor = "Macronix", - .name = "MX25U3235E/F", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25U3235E, - .total_size = 4096, - .page_size = 256, - /* F model supports SFDP */ - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - /* TODO: security register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1650, 2000}, - }, - - { - .vendor = "Macronix", - .name = "MX25U6435E/F", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25U6435E, - .total_size = 8192, - .page_size = 256, - /* F model supports SFDP */ - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - /* TODO: security register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1650, 2000}, - }, - - { - .vendor = "Macronix", - .name = "MX25U12835F", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25U12835E, - .total_size = 16384, - .page_size = 256, - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 512} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - /* TODO: security register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1650, 2000}, - }, - - { - .vendor = "Macronix", - .name = "MX29F001B", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F001B, - .total_size = 128, - .page_size = 32 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 1}, - {4 * 1024, 2}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29F001T", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F001T, - .total_size = 128, - .page_size = 32 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 1}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {4 * 1024, 2}, - {8 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29F002(N)B", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F002B, - .total_size = 256, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29F002(N)T", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F002T, - .total_size = 256, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29F022(N)B", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F022B, - .total_size = 256, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29F022(N)T", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F022T, - .total_size = 256, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29F040", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F040, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL320EB", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL320EB, - .total_size = 4096, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 63}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL320ET", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL320ET, - .total_size = 4096, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 63}, - {8 * 1024, 8}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL320EH/L", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL320EHL, - .total_size = 4096, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL640EB", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL640EB, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL640ET", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL640ET, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 127}, - {8 * 1024, 8}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL640EH/L", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL640EHL, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL128F", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL128F, - .total_size = 16384, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29LV040", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29LV040, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P05-A", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P05A, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - /* The ST M25P05 is a bit of a problem. It has the same ID as the - * ST M25P05-A in RES mode, but supports only 128 byte writes instead - * of 256 byte writes. We rely heavily on the fact that probe_spi_res1 - * only is successful if RDID does not work. - */ - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P05", - .bustype = BUS_SPI, - .manufacture_id = 0, /* Not used. */ - .model_id = ST_M25P05_RES, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res1, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* 128 */ - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P10-A", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P10A, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PRE, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - /* The ST M25P10 has the same problem as the M25P05. */ - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P10", - .bustype = BUS_SPI, - .manufacture_id = 0, /* Not used. */ - .model_id = ST_M25P10_RES, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res1, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* 128 */ - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", /* Numonyx */ - .name = "M25P20", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P20-old", - .bustype = BUS_SPI, - .manufacture_id = 0, /* Not used. */ - .model_id = ST_M25P20_RES, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_res1, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", /* Numonyx */ - .name = "M25P40", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P40-old", - .bustype = BUS_SPI, - .manufacture_id = 0, /* Not used. */ - .model_id = ST_M25P40_RES, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res1, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P80", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P16", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P32", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P32, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P64", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P64, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P128", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P128, - .total_size = 16384, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PE10", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PE10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PE20", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PE20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PE40", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PE40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PE80", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PE80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PE16", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PE16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PX80", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PX80, - .total_size = 1024, - .page_size = 256, - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { { 4 * 1024, 256 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PX16", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PX16, - .total_size = 2048, - .page_size = 256, - /* OTP: 64B total; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 512 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2300, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PX32", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PX32, - .total_size = 4096, - .page_size = 256, - /* OTP: 64B total; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PRE, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 1024 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PX64", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PX64, - .total_size = 8192, - .page_size = 256, - /* OTP: 64B total; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 2048 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M45PE10", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M45PE10, - .total_size = 128, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256, 512} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M45PE20", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M45PE20, - .total_size = 256, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256, 1024} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M45PE40", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M45PE40, - .total_size = 512, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256, 2048} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M45PE80", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M45PE80, - .total_size = 1024, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256, 4096} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M45PE16", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M45PE16, - .total_size = 2048, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256, 8192} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q016", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q016__1E, - .total_size = 2048, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1700, 2000}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q032..1E", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q032__1E, - .total_size = 4096, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1700, 2000}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q032..3E", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q032__3E, - .total_size = 4096, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q064..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */ - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q064__1E, - .total_size = 8192, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1700, 2000}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q064..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */ - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q064__3E, - .total_size = 8192, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q128..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */ - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q128__1E, - .total_size = 16384, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 4096 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1700, 2000}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q128..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */ - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q128__3E, - .total_size = 16384, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 4096 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29C51000B", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29C51000B, - .total_size = 64, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29C51000T", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29C51000T, - .total_size = 64, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29C51400B", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29C51400B, - .total_size = 512, - .page_size = 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {1024, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29C51400T", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29C51400T, - .total_size = 512, - .page_size = 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {1024, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29LC51000", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29LC51000, - .total_size = 64, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29LC51001", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29LC51001, - .total_size = 128, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 256} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29LC51002", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29LC51002, - .total_size = 256, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Nantronics", - .name = "N25S10", - .bustype = BUS_SPI, - .manufacture_id = NANTRONICS_ID_NOPREFIX, - .model_id = NANTRONICS_N25S10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Nantronics", - .name = "N25S20", - .bustype = BUS_SPI, - .manufacture_id = NANTRONICS_ID_NOPREFIX, - .model_id = NANTRONICS_N25S20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Nantronics", - .name = "N25S40", - .bustype = BUS_SPI, - .manufacture_id = NANTRONICS_ID_NOPREFIX, - .model_id = NANTRONICS_N25S40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Nantronics", - .name = "N25S80", - .bustype = BUS_SPI, - .manufacture_id = NANTRONICS_ID_NOPREFIX, - .model_id = NANTRONICS_N25S80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Nantronics", - .name = "N25S16", - .bustype = BUS_SPI, - .manufacture_id = NANTRONICS_ID_NOPREFIX, - .model_id = NANTRONICS_N25S16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LD256C", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LD256C, - .total_size = 32, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 8} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 8} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 1} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {32 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {32 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2700, 3600}, - }, - { - .vendor = "PMC", - .name = "Pm25LD512(C)", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LD512, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2300, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LD010(C)", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LD010, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD010 */ - }, - - { - .vendor = "PMC", - .name = "Pm25LD020(C)", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LD020, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD020 */ - }, - - { - .vendor = "PMC", - .name = "Pm25LD040(C)", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV040, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD040 */ - }, - -{ - .vendor = "PMC", - .name = "Pm25LV512(A)", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM25LV512, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, /* The continuation code is transferred as the 3rd byte m( */ - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LV010", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM25LV010, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_res2, /* The continuation code is transferred as the 3rd byte m( */ - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LV010A", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV010, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LV020", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV020, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LV040", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV040, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LV080B", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV080B, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LV016B", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV016B, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm29F002T", - .bustype = BUS_PARALLEL, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM29F002T, - .total_size = 256, - .page_size = 8 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 1}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "PMC", - .name = "Pm29F002B", - .bustype = BUS_PARALLEL, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM29F002B, - .total_size = 256, - .page_size = 8 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {96 * 1024, 1}, - {128 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "PMC", - .name = "Pm39LV010", - .bustype = BUS_PARALLEL, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM39F010, /* Pm39LV010 and Pm39F010 have identical IDs but different voltage */ - .total_size = 128, - .page_size = 4096, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm39LV020", - .bustype = BUS_PARALLEL, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM39LV020, - .total_size = 256, - .page_size = 4096, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm39LV040", - .bustype = BUS_PARALLEL, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM39LV040, - .total_size = 512, - .page_size = 4096, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm39LV512", - .bustype = BUS_PARALLEL, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM39LV512, - .total_size = 64, - .page_size = 4096, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm49FL002", - .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM49FL002, - .total_size = 256, - .page_size = 16 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .unlock = unlock_regspace2_uniform_32k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm49FL004", - .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM49FL004, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW106", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW106, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {2 * 1024, 64} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, /* FIXME: Add ERSER error flag. */ - .unlock = spi_disable_blockprotect_bp1_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW406A", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW406A, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FU406B", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FU406B, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2300, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW203A", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW203A, - .total_size = 256, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 1024} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW403A", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW403A, - .total_size = 512, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256, 2 * 1024} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW418A", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW418A, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* some quad-read supported ("HD_READ mode") */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW806", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW806, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW808", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW808, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {8 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* some quad-read supported ("HD_READ mode") */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sharp", - .name = "LH28F008BJT-BTLZ1", - .bustype = BUS_PARALLEL, - .manufacture_id = SHARP_ID, - .model_id = SHARP_LH28F008BJ__PB, - .total_size = 1024, - .page_size = 64 * 1024, - .tested = TEST_OK_PREW, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 15} - }, - .block_erase = erase_block_82802ab, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_sector_49lfxxxc, - } - }, - .unlock = unlock_lh28f008bjt, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sharp", - .name = "LHF00L04", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = SHARP_ID, - .model_id = SHARP_LHF00L04, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 15}, - {8 * 1024, 8} - }, - .block_erase = erase_block_82802ab, - }, { - .eraseblocks = { - {1024 * 1024, 1} - }, - .block_erase = NULL, /* 30 D0, only in A/A mux mode */ - }, - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL004A", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL004A, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL008A", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL008A, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PRE, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL016A", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL016A, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL032A/P", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL032A, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL064A/P", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL064A, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL204K", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL204, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL208K", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL208, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL116K/S25FL216K", /* FIXME: separate them */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL216, - .total_size = 2048, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (S25FL116K only) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 2048 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 2048 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL132K", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL132K, - .total_size = 4096, - .page_size = 256, - /* OTP: 768B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 4096 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 4096 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* TODO: improve */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL164K", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL164K, - .total_size = 8192, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 8192 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 8192 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* TODO: improve */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL128P......0", /* uniform 64 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL128P......1", /* uniform 256kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL128S......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 256, - /* supports 4B addressing */ - /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - /* This chip supports erasing of the 32 so-called "parameter sectors" with - * opcode 0x20. Trying to access an address outside these 4kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {4 * 1024, 32}, - {64 * 1024, 254} // inaccessible - }, - .block_erase = spi_block_erase_20, - }, { */ - .eraseblocks = { { 64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL128S......1", /* uniform 256 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 512, - /* supports 4B addressing */ - /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL129P......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 256, - /* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - /* FIXME: This chip supports erasing of the 32 so-called "parameter sectors" with - * opcode 0x20. Trying to access an address outside these 4kB blocks does have no - * effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {4 * 1024, 32}, - {64 * 1024, 254} // inaccessible - }, - .block_erase = spi_block_erase_20, - }, { */ - /* FIXME: Additionally it also supports erase opcode 40h for the respective 2*4 kB pairs - .eraseblocks = { - {8 * 1024, 16}, - {64 * 1024, 254} // inaccessible - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { { 64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL129P......1", /* uniform 256 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 512, - /* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25LF020A", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF020_REMS, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rems, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25LF040A", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF040_REMS, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25LF080(A)", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF080_REMS, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF512(A)", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF512_REMS, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rems, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, /* Supported by SST25VF512A only */ - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, /* Supported by SST25VF512A only */ - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, /* Fast read (0x0B) supported by SST25VF512A only */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF010(A)", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF010_REMS, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rems, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, /* Supported by SST25VF010A only */ - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, /* Supported by SST25VF010A only */ - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, /* Fast read (0x0B) supported by SST25VF010A only */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF020", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF020_REMS, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_UNTESTED, - .probe = probe_spi_rems, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, /* only */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF020B", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF020B, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 and 2nd SR */ - .unlock = spi_disable_blockprotect, /* FIXME: 2nd SR */ - .write = spi_aai_write, /* AAI supported (0xAD) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF040", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF040_REMS, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PR, - .probe = probe_spi_rems, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF040B", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF040B, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25vf040b, - .unlock = spi_disable_blockprotect, - .write = spi_aai_write, /* AAI supported (0xAD) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF040B.REMS", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF040B_REMS, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rems, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25vf040b, - .unlock = spi_disable_blockprotect, - .write = spi_aai_write, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF080B", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF080B, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_aai_write, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF016B", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF016B, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25vf016, - .unlock = spi_disable_blockprotect, - .write = spi_aai_write, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF032B", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF032B, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_aai_write, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF064C", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF064C, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25WF512", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25WF512, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {1024 * 64, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 64, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_aai_write, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "SST", - .name = "SST25WF010", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25WF010, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {1024 * 128, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 128, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_aai_write, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "SST", - .name = "SST25WF020", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25WF020, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 256, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 256, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_aai_write, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "SST", - .name = "SST25WF040", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25WF040, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 512, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 512, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_aai_write, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "SST", - .name = "SST25WF080", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25WF080, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* *does* have a BP3 but it is useless */ - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_aai_write, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "SST", - .name = "SST28SF040A", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST28SF040, - .total_size = 512, - .page_size = 256, - .feature_bits = 0, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst28sf040.c) */ - .block_erasers = - { - { - .eraseblocks = { {128, 4096} }, - .block_erase = erase_sector_28sf040, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_28sf040, - } - }, - .unlock = unprotect_28sf040, - .write = write_28sf040, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST29EE010", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST29EE010, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST29LE010", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST29LE010, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST29EE020A", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST29EE020A, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST29LE020", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST29LE020, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST39SF512", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39SF512, - .total_size = 64, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST39SF010A", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39SF010, - .total_size = 128, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST39SF020A", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39SF020, - .total_size = 256, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST39SF040", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39SF040, - .total_size = 512, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST39VF512", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39VF512, - .total_size = 64, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST39VF010", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39VF010, - .total_size = 128, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST39VF020", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39VF020, - .total_size = 256, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST39VF040", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39VF040, - .total_size = 512, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST39VF080", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39VF080, - .total_size = 1024, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF002A/B", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = SST_ID, - .model_id = SST_SST49LF002A, - .total_size = 256, - .page_size = 16 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ - } - }, - .printlock = printlock_sst_fwhub, - .unlock = unlock_sst_fwhub, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF003A/B", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = SST_ID, - .model_id = SST_SST49LF003A, - .total_size = 384, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 96} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 6} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {384 * 1024, 1} }, - .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ - } - }, - .printlock = printlock_sst_fwhub, - .unlock = unlock_sst_fwhub, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - /* Contrary to the data sheet, TBL# on the SST49LF004B affects the top 128kB (instead of 64kB) - * and is only honored for 64k block erase, but not 4k sector erase. - */ - .vendor = "SST", - .name = "SST49LF004A/B", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = SST_ID, - .model_id = SST_SST49LF004A, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ - }, - }, - .printlock = printlock_sst_fwhub, - .unlock = unlock_sst_fwhub, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF004C", - .bustype = BUS_FWH, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF004C, - .total_size = 512, - .page_size = 4 * 1024, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_49lfxxxc, - }, { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_1, - .unlock = unlock_regspace2_block_eraser_1, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF008A", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = SST_ID, - .model_id = SST_SST49LF008A, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ - } - }, - .printlock = printlock_sst_fwhub, - .unlock = unlock_sst_fwhub, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF008C", - .bustype = BUS_FWH, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF008C, - .total_size = 1024, - .page_size = 4 * 1024, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = erase_sector_49lfxxxc, - }, { - .eraseblocks = { - {64 * 1024, 15}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_1, - .unlock = unlock_regspace2_block_eraser_1, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF016C", - .bustype = BUS_FWH, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF016C, - .total_size = 2048, - .page_size = 4 * 1024, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = erase_sector_49lfxxxc, - }, { - .eraseblocks = { - {64 * 1024, 31}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_1, - .unlock = unlock_regspace2_block_eraser_1, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF020", - .bustype = BUS_LPC, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF020, - .total_size = 256, - .page_size = 16 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = NULL, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF020A", - .bustype = BUS_LPC, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF020A, - .total_size = 256, - .page_size = 4 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = NULL, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF040", - .bustype = BUS_LPC, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF040, - .total_size = 512, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = NULL, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF040B", - .bustype = BUS_LPC, /* A/A Mux */ - .manufacture_id = SST_ID, - .model_id = SST_SST49LF040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = 1, /* 150ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = NULL, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF080A", - .bustype = BUS_LPC, /* A/A Mux */ - .manufacture_id = SST_ID, - .model_id = SST_SST49LF080A, - .total_size = 1024, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = NULL, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF160C", - .bustype = BUS_LPC, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF160C, - .total_size = 2048, - .page_size = 4 * 1024, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = erase_sector_49lfxxxc, - }, { - .eraseblocks = { - {64 * 1024, 31}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_1, - .unlock = unlock_regspace2_block_eraser_1, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "ST", - .name = "M29F002B", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29F002B, - .total_size = 256, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -X, others 4.5-5.5V */ - }, - - { - .vendor = "ST", - .name = "M29F002T/NT", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29F002T, - .total_size = 256, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -X, others 4.5-5.5V */ - }, - - { - .vendor = "ST", - .name = "M29F040B", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29F040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* datasheet specifies no timing */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - /* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */ - .vendor = "ST", - .name = "M29F400BB", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29F400BB, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 7}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - { - /* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */ - .vendor = "ST", - .name = "M29F400BT", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29F400BT, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "ST", - .name = "M29W010B", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29W010B, - .total_size = 128, - .page_size = 16 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {16 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ST", - .name = "M29W040B", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29W040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ST", - .name = "M29W512B", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29W512B, - .total_size = 64, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ST", - .name = "M50FLW040A", - .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FLW040A, - .total_size = 512, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 16}, /* sector */ - {64 * 1024, 5}, /* block */ - {4 * 1024, 16}, /* sector */ - {4 * 1024, 16}, /* sector */ - }, - .block_erase = erase_sector_stm50, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_82802ab, - } - }, - .write = write_82802ab, - .unlock = unlock_regspace2_uniform_64k, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FLW040B", - .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FLW040B, - .total_size = 512, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 16}, /* sector */ - {4 * 1024, 16}, /* sector */ - {64 * 1024, 5}, /* block */ - {4 * 1024, 16}, /* sector */ - }, - .block_erase = erase_sector_stm50, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_82802ab, - } - }, - .write = write_82802ab, - .unlock = unlock_regspace2_uniform_64k, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FLW080A", - .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FLW080A, - .total_size = 1024, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 16}, /* sector */ - {64 * 1024, 13}, /* block */ - {4 * 1024, 16}, /* sector */ - {4 * 1024, 16}, /* sector */ - }, - .block_erase = erase_sector_stm50, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FLW080B", - .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FLW080B, - .total_size = 1024, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 16}, /* sector */ - {4 * 1024, 16}, /* sector */ - {64 * 1024, 13}, /* block */ - {4 * 1024, 16}, /* sector */ - }, - .block_erase = erase_sector_stm50, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FW002", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FW002, - .total_size = 256, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, { - .eraseblocks = { {256 * 1024, 1}, }, - .block_erase = NULL, /* Only in A/A mux mode */ - } - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FW016", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FW016, - .total_size = 2048, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = erase_block_82802ab, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FW040", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FW040, - .total_size = 512, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_82802ab, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FW080", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FW080, - .total_size = 1024, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_82802ab, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50LPW080", - .bustype = BUS_LPC, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50LPW080, - .total_size = 1024, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_82802ab, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50LPW116", - .bustype = BUS_LPC, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50LPW116, - .total_size = 2048, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 16}, - {64 * 1024, 30}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{F,S,V}29C51001B", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C51001B, - .total_size = 128, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {512, 256} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{F,S,V}29C51001T", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C51001T, - .total_size = 128, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {512, 256} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{F,S,V}29C51002B", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C51002B, - .total_size = 256, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {512, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{F,S,V}29C51002T", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C51002T, - .total_size = 256, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {512, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{F,S,V}29C51004B", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C51004B, - .total_size = 512, - .page_size = 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {1024, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{F,S,V}29C51004T", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C51004T, - .total_size = 512, - .page_size = 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {1024, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{S,V}29C31004B", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C31004B, - .total_size = 512, - .page_size = 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {1024, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{S,V}29C31004T", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C31004T, - .total_size = 512, - .page_size = 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {1024, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "TI", - .name = "TMS29F002RB", - .bustype = BUS_PARALLEL, - .manufacture_id = TI_OLD_ID, - .model_id = TI_TMS29F002RB, - .total_size = 256, - .page_size = 16384, /* Non-uniform sectors */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "TI", - .name = "TMS29F002RT", - .bustype = BUS_PARALLEL, - .manufacture_id = TI_OLD_ID, - .model_id = TI_TMS29F002RT, - .total_size = 256, - .page_size = 16384, /* Non-uniform sectors */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Winbond", - .name = "W25Q40.V", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q40_V, - .total_size = 512, - .page_size = 256, - /* supports SFDP */ - /* OTP: 756B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25Q80.V", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q80_V, - .total_size = 1024, - .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25Q16.V", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q16_V, - .total_size = 2048, - .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25Q32.V", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q32_V, - .total_size = 4096, - .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25Q64.V", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q64_V, - .total_size = 8192, - .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25Q128.V", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q128_V, - .total_size = 16384, - .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 512} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25Q20.W", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q20_W, - .total_size = 256, - .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ - }, - - { - .vendor = "Winbond", - .name = "W25Q40.W", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q40_W, - .total_size = 512, - .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ - }, - - { - .vendor = "Winbond", - .name = "W25Q80.W", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q80_W, - .total_size = 1024, - .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ - }, - - { - .vendor = "Winbond", - .name = "W25Q16.W", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q16_W, - .total_size = 2048, - .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ - }, - - { - .vendor = "Winbond", - .name = "W25Q32.W", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q32_W, - .total_size = 4096, - .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ - }, - - { - .vendor = "Winbond", - .name = "W25Q64.W", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q64_W, - .total_size = 8192, - .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ - }, - - { - .vendor = "Winbond", - .name = "W25X10", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25X20", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25X40", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25X80", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25X16", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25X32", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X32, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25X64", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X64, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PROBE, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29C010(M)/W29C011A/W29EE011/W29EE012-old", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W29C010, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PREW, - .probe = probe_w29ee011, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (w29ee011.c) */ - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - }, - - {/* W29EE011, W29EE012, W29C010M, W29C011A do not support probe_jedec according to the datasheet, but it works for newer(?) steppings. */ - .vendor = "Winbond", - .name = "W29C010(M)/W29C011A/W29EE011/W29EE012", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W29C010, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, /* used datasheet for the W29C011A */ - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - }, - - { - .vendor = "Winbond", - .name = "W29C020(C)/W29C022", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W29C020, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Winbond", - .name = "W29C040/P", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W29C040, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Winbond", - .name = "W29GL032CB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL032CB, - .total_size = 4096, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 63}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29GL032CT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL032CT, - .total_size = 4096, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 63}, - {8 * 1024, 8}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29GL032CH/L", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL032CHL, - .total_size = 4096, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29GL064CB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL064CB, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29GL064CT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL064CT, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 127}, - {8 * 1024, 8}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29GL064CH/L", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL064CHL, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29GL128C", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL128CHL, - .total_size = 16384, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39F010", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39F010, - .total_size = 128, - .page_size = 4 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39f010, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Winbond", - .name = "W39L010", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39L010, - .total_size = 128, - .page_size = 4 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39l010, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39L020", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39L020, - .total_size = 256, - .page_size = 4 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39l020, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39L040", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39L040, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39l040, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39V040A", - .bustype = BUS_LPC, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V040A, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v040a, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39V040B", - .bustype = BUS_LPC, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v040b, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39V040C", - .bustype = BUS_LPC, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V040C, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v040c, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39V040FA", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V040FA, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v040fa, - .unlock = unlock_regspace2_uniform_64k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39V040FB", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v040fb, - .unlock = unlock_regspace2_uniform_64k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program */ - }, - - { - .vendor = "Winbond", - .name = "W39V040FC", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V040C, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v040fc, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program */ - }, - - { - .vendor = "Winbond", - .name = "W39V080A", - .bustype = BUS_LPC, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V080A, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v080a, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W49F002U/N", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W49F002U, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 1}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Winbond", - .name = "W49F020", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W49F020, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PROBE, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Winbond", - .name = "W49V002A", - .bustype = BUS_LPC, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W49V002A, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W49V002FA", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W49V002FA, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39V080FA", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V080FA, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v080fa, - .unlock = unlock_regspace2_uniform_64k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program */ - }, - - { - .vendor = "Winbond", - .name = "W39V080FA (dual mode)", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V080FA_DM, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v080fa_dual, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program */ - }, - - { - .vendor = "Unknown", - .name = "SFDP-capable chip", - .bustype = BUS_SPI, - .manufacture_id = GENERIC_MANUF_ID, - .model_id = SFDP_DEVICE_ID, - /* We present our own "report this" text hence we do not - * want the default "This flash part has status UNTESTED..." - * text to be printed. */ - .tested = TEST_OK_PREW, - .probe = probe_spi_sfdp, - .unlock = spi_disable_blockprotect, /* is this safe? */ - .read = spi_chip_read, - /* FIXME: some vendor extensions define this */ - .voltage = {0}, - /* Everything below will be set by the probing function. */ - .write = NULL, - .total_size = 0, - .page_size = 0, - .feature_bits = 0, - .block_erasers = {}, - }, - - { - .vendor = "Programmer", - .name = "Opaque flash chip", - .bustype = BUS_PROG, - .manufacture_id = PROGMANUF_ID, - .model_id = PROGDEV_ID, - .total_size = 0, - .page_size = 256, - /* probe is assumed to work, rest will be filled in by probe */ - .tested = TEST_OK_PROBE, - .probe = probe_opaque, - /* eraseblock sizes will be set by the probing function */ - .block_erasers = - { - { - .block_erase = erase_opaque, - } - }, - .write = write_opaque, - .read = read_opaque, - }, - - { - .vendor = "AMIC", - .name = "unknown AMIC SPI chip", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "Atmel", - .name = "unknown Atmel SPI chip", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "Eon", - .name = "unknown Eon SPI chip", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "Macronix", - .name = "unknown Macronix SPI chip", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "PMC", - .name = "unknown PMC SPI chip", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "SST", - .name = "unknown SST SPI chip", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "ST", - .name = "unknown ST SPI chip", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "Sanyo", - .name = "unknown Sanyo SPI chip", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "Winbond", - .name = "unknown Winbond (ex Nexcom) SPI chip", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "Generic", - .name = "unknown SPI chip (RDID)", - .bustype = BUS_SPI, - .manufacture_id = GENERIC_MANUF_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .write = NULL, - }, - - { - .vendor = "Generic", - .name = "unknown SPI chip (REMS)", - .bustype = BUS_SPI, - .manufacture_id = GENERIC_MANUF_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rems, - .write = NULL, - }, - - {0} -}; - -const unsigned int flashchips_size = ARRAY_SIZE(flashchips); diff --git a/resources/flashrom/patch/flashchips.c_lenovobios_sst b/resources/flashrom/patch/flashchips.c_lenovobios_sst deleted file mode 100644 index 9662e0d0..00000000 --- a/resources/flashrom/patch/flashchips.c_lenovobios_sst +++ /dev/null @@ -1,14660 +0,0 @@ -/* - * This file is part of the flashrom project. - * - * Copyright (C) 2000 Silicon Integrated System Corporation - * Copyright (C) 2004 Tyan Corp - * Copyright (C) 2005-2008 coresystems GmbH <stepan@openbios.org> - * Copyright (C) 2006-2009 Carl-Daniel Hailfinger - * Copyright (C) 2009 Sean Nelson <audiohacked@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "flash.h" -#include "flashchips.h" -#include "chipdrivers.h" - -/** - * List of supported flash chips. - * - * Please keep the list sorted by vendor name and chip family, so that the output of 'flashrom -L' is roughly - * alphabetically sorted. Within families keep them in order of density. - */ -const struct flashchip flashchips[] = { - - /* - * .vendor = Vendor name - * .name = Chip name - * .bustype = Supported flash bus types (Parallel, LPC...) - * .manufacture_id = Manufacturer chip ID - * .model_id = Model chip ID - * .total_size = Total size in (binary) kbytes - * .page_size = Page or eraseblock(?) size in bytes - * .tested = Test status - * .probe = Probe function - * .probe_timing = Probe function delay - * .block_erasers[] = Array of erase layouts and erase functions - * { - * .eraseblocks[] = Array of { blocksize, blockcount } - * .block_erase = Block erase function - * } - * .printlock = Chip lock status function - * .unlock = Chip unlock function - * .write = Chip write function - * .read = Chip read function - * .voltage = Voltage range in millivolt - */ - - { - .vendor = "AMD", - .name = "Am29F010A/B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29F010B, /* Same as Am29F010A */ - .total_size = 128, - .page_size = 16 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {16 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMD", - .name = "Am29F002(N)BB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29F002BB, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_SHORT_RESET | FEATURE_ADDR_2AA, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ - }, - - { - .vendor = "AMD", - .name = "Am29F002(N)BT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29F002BT, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_EITHER_RESET | FEATURE_ADDR_2AA, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ - }, - - { - .vendor = "AMD", - .name = "Am29F016D", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29F016D, - .total_size = 2 * 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMD", - .name = "Am29F040B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29F040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMD", - .name = "Am29F080B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29F080B, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMD", - .name = "Am29LV001BB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV001BB, - .total_size = 128, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 1}, - {4 * 1024, 2}, - {16 * 1024, 7}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -45R, others 2.7-3.6V */ - }, - - { - .vendor = "AMD", - .name = "Am29LV001BT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV001BT, - .total_size = 128, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 7}, - {4 * 1024, 2}, - {8 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -45R, others 2.7-3.6V */ - }, - - { - .vendor = "AMD", - .name = "Am29LV002BB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV002BB, - .total_size = 256, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -55, others 2.7-3.6V */ - }, - - { - .vendor = "AMD", - .name = "Am29LV002BT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV002BT, - .total_size = 256, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -55, others 2.7-3.6V */ - }, - - { - .vendor = "AMD", - .name = "Am29LV004BB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV004BB, - .total_size = 512, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 7}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMD", - .name = "Am29LV004BT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV004BT, - .total_size = 512, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMD", - .name = "Am29LV008BB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV008BB, - .total_size = 1024, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 15}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600} /* 3.0-3.6V for type -70R, others 2.7-3.6V */ - }, - - { - .vendor = "AMD", - .name = "Am29LV008BT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV008BT, - .total_size = 1024, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 15}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600} /* 3.0-3.6V for type -70R, others 2.7-3.6V */ - }, - - { - .vendor = "AMD", - .name = "Am29LV040B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -60R, others 2.7-3.6V*/ - }, - - { - .vendor = "AMD", - .name = "Am29LV081B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV080B, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, /* datasheet specifies address as don't care */ - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -70R, others 2.7-3.6V */ - }, - - { - .vendor = "AMIC", - .name = "A25L05PT", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L05PT, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L05PU", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L05PU, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L10PT", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L10PT, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 1}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L10PU", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L10PU, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 1}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L20PT", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L20PT, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L20PU", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L20PU, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - /* The A25L40P{T,U} chips are distinguished by their - * erase block layouts, but without any distinction in RDID. - * This inexplicable quirk was verified by Rudolf Marek - * and discussed on the flashrom mailing list on 2010-07-12. - */ - { - .vendor = "AMIC", - .name = "A25L40PT", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L40PT, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L40PU", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L40PU, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 7}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L80P", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L80P, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PRE, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 15}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L16PT", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L16PT, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 31}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L16PU", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L16PU, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 31}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L512", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L512, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 16 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 1 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 64 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L010", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L010, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 32 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 2 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 128 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L020", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L020, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 64 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 4 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 256 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L040", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L040, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 128 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 8 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 512 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L080", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L080, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 256 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 16 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 1024 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L016", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L016, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 512 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 32 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 2048 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L032", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L032, - .total_size = 4096, - .page_size = 256, - /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 1024 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 64 } }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { { 64 * 1024, 64 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 4096 * 1024, 1 } }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 4096 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25LQ16", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25LQ16, - .total_size = 2048, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { { 4 * 1024, 512 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 32 } }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { { 64 * 1024, 32 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 2048 * 1024, 1 } }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 2048 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25LQ032/A25LQ32A", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25LQ032, - .total_size = 4096, - .page_size = 256, - /* A25LQ32A supports SFDP */ - /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 1024 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 64 } }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { { 64 * 1024, 64 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 4096 * 1024, 1 } }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 4096 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25LQ64", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25LQ032, - .total_size = 8192, - .page_size = 256, - /* supports SFDP */ - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - /* QPI enable 0x35, disable 0xF5 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 2048 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 32 * 1024, 256 } }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { { 64 * 1024, 128 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 8192 * 1024, 1 } }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 8192 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enhance (sic!) */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A29002B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A29002B, - .total_size = 256, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMIC", - .name = "A29002T", - .bustype = BUS_PARALLEL, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A29002T, - .total_size = 256, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMIC", - .name = "A29040B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A29040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMIC", - .name = "A49LF040A", - .bustype = BUS_LPC, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A49LF040A, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25DF021", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF021, - .total_size = 256, - .page_size = 256, - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, /* 2.3-3.6V & 2.7-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT25DF041A", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF041A, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, /* 2.3-3.6V & 2.7-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT25DF081", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF081, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1600, 2000}, /* Datasheet says range is 1.65-1.95 V */ - }, - - { - .vendor = "Atmel", - .name = "AT25DF081A", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF081A, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25DF161", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF161, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PROBE, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25DF321", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF321, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25DF321A", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF321A, - .total_size = 4096, - .page_size = 256, - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25DF641(A)", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF641, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25DL081", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF081, - .total_size = 1024, - .page_size = 256, - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, /* Dual I/O (0xA2) supported */ - .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "Atmel", - .name = "AT25DL161", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DL161, - .total_size = 2048, - .page_size = 256, - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, /* Dual I/O (0xA2) supported */ - .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "Atmel", - .name = "AT25DQ161", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DQ161, - .total_size = 2048, - .page_size = 256, - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25F512", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F512, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_at25f, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_62, - } - }, - .printlock = spi_prettyprint_status_register_at25f, - .unlock = spi_disable_blockprotect_at25f, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25F512A", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F512A, - .total_size = 64, - .page_size = 128, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_at25f, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_62, - } - }, - .printlock = spi_prettyprint_status_register_at25f512a, - /* FIXME: It is not correct to use this one, because the BP1 bit is N/A. */ - .unlock = spi_disable_blockprotect_at25f512a, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25F512B", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F512B, - .total_size = 64, - .page_size = 256, - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_62, - } - }, - .printlock = spi_prettyprint_status_register_at25f512b, - .unlock = spi_disable_blockprotect_at25f512b, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - /* The A suffix indicates 33MHz instead of 20MHz clock rate. - * All other properties seem to be the same.*/ - .name = "AT25F1024(A)", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F1024, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_at25f, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_62, - } - }, - .printlock = spi_prettyprint_status_register_at25f, - .unlock = spi_disable_blockprotect_at25f, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25F2048", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F2048, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_at25f, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_62, - } - }, - .printlock = spi_prettyprint_status_register_at25f, - .unlock = spi_disable_blockprotect_at25f, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25F4096", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F4096, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_at25f, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_62, - } - }, - .printlock = spi_prettyprint_status_register_at25f4096, - /* "Bits 5-6 are 0s when device is not in an internal write cycle." Better leave them alone: */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25FS010", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25FS010, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25fs010, - .unlock = spi_disable_blockprotect_at25fs010, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25FS040", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25FS040, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25fs040, - .unlock = spi_disable_blockprotect_at25fs040, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT26DF041", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT26DF041, - .total_size = 512, - .page_size = 256, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 2048} }, - .block_erase = spi_block_erase_81, - }, { - .eraseblocks = { {2 * 1024, 256} }, - .block_erase = spi_block_erase_50, - }, { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - } - }, - .printlock = spi_prettyprint_status_register_plain, - /* Supports also an incompatible page write (of exactly 256 B) and an auto-erasing write. */ - .write = spi_chip_write_1, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, /* 3.0-3.6V for higher speed, 2.7-3.6V normal */ - }, - - { - .vendor = "Atmel", - .name = "AT26DF081A", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT26DF081A, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at26df081a, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT26DF161", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT26DF161, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT26DF161A", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT26DF161A, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at26df081a, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - /*The AT26DF321 has the same ID as the AT25DF321. */ - /*{ - .vendor = "Atmel", - .name = "AT26DF321", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT26DF321, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .printlock = spi_prettyprint_status_register_at26df081a, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - },*/ - - { - .vendor = "Atmel", - .name = "AT26F004", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT26F004, - .total_size = 512, - .page_size = 256, - .tested = {.probe = NT, .read = NT, .erase = NT, .write = BAD }, - .feature_bits = FEATURE_WRSR_WREN, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .write = NULL /* Incompatible Page write */, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT29C512", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT29C512, - .total_size = 64, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10000, /* 10mS, Enter=Exec */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT29C010A", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT29C010A, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = 10000, /* 10mS, Enter=Exec */ - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, /* FIXME */ - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT29C020", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT29C020, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10000, /* 10ms */ - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT29C040A", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT29C040A, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10000, /* 10 ms */ - .block_erasers = - { - { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT45CS1282", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45CS1282, - .total_size = 16896 /* No power of two sizes */, - .page_size = 1056 /* No power of two sizes */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77 (4 dummy bytes); write 0x9A (via buffer) */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1056, 1}, /* sector 0a: opcode 50h */ - {248 * 1056, 1}, /* sector 0b: opcode 7Ch */ - {256 * 1056, 63}, /* sectors 1 - 63: opcode 7Ch */ - }, - .block_erase = spi_erase_at45cs_sector, - } - }, - .printlock = spi_prettyprint_status_register_plain, - .gran = write_gran_1056bytes, - .write = spi_write_at45db, - .read = spi_read_at45db, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT45DB011D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB011D, - .total_size = 128 /* or 132, determined from status register */, - .page_size = 256 /* or 264, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 512} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 256, 512/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 256, 1}, - {120 * 256, 1}, - {128 * 256, 3}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT45DB021D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB021D, - .total_size = 256 /* or 264, determined from status register */, - .page_size = 256 /* or 264, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 1024} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 256, 1024/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 256, 1}, - {120 * 256, 1}, - {128 * 256, 7}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT45DB041D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB041D, - .total_size = 512 /* or 528, determined from status register */, - .page_size = 256 /* or 264, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 2048} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 256, 2048/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 256, 1}, - {248 * 256, 1}, - {256 * 256, 7}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT45DB081D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB081D, - .total_size = 1024 /* or 1056, determined from status register */, - .page_size = 256 /* or 264, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 4096} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 256, 4096/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 256, 1}, - {248 * 256, 1}, - {256 * 256, 15}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT45DB161D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB161D, - .total_size = 2048 /* or 2112, determined from status register */, - .page_size = 512 /* or 528, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 4096} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 512, 4096/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 512, 1}, - {248 * 512, 1}, - {256 * 512, 15}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT45DB321C", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB321C, - .total_size = 4224 /* No power of two sizes */, - .page_size = 528 /* No power of two sizes */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77 (4 dummy bytes); write 0x9A (via buffer) */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {528, 8192} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 528, 8192/8} }, - .block_erase = spi_erase_at45db_block, - }, /* Although the datasheets describes sectors (which can be write protected) - * there seems to be no erase functions for them. - { - .eraseblocks = { - {8 * 528, 1}, - {120 * 528, 1}, - {128 * 528, 63}, - }, - .block_erase = spi_erase_at45db_sector - }, */ { - .eraseblocks = { {4224 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .printlock = spi_prettyprint_status_register_at45db, /* Bit 0 is undefined, no lockdown */ - .gran = write_gran_528bytes, - .write = spi_write_at45db, - .read = spi_read_at45db_e8, /* 3 address and 4 dummy bytes */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT45DB321D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB321D, - .total_size = 4096 /* or 4224, determined from status register */, - .page_size = 512 /* or 528, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 8192} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 512, 8192/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 512, 1}, - {120 * 512, 1}, - {128 * 512, 63}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {4096 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT45DB321E", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB321C, - .total_size = 4096 /* or 4224, determined from status register */, - .page_size = 512 /* or 528, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 8192} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 512, 8192/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 512, 1}, - {120 * 512, 1}, - {128 * 512, 63}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {4096 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, /* has a 2nd status register */ - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2500, 3600}, /* 2.3-3.6V & 2.5-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT45DB642D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB642D, - .total_size = 8192 /* or 8448, determined from status register */, - .page_size = 1024 /* or 1056, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {1024, 8192} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 1024, 8192/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 1024, 1}, - {248 * 1024, 1}, - {256 * 1024, 31}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {8192 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT49BV512", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49BV512, - .total_size = 64, - .page_size = 64, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT49F002(N)", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F002N, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {96 * 1024, 1}, - {128 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT49F002(N)T", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F002NT, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 1}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT49(H)F010", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F010, - .total_size = 128, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_at49f, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT49F020", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F020, - .total_size = 256, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - /* Chip features an optional permanent write protection - * of the first 8 kB. The erase function is the same as - * above, but 00000H to 01FFFH will not be erased. - * FIXME: add another eraser when partial erasers are - * supported. - */ - }, - .printlock = printlock_at49f, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT49F040", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F040, - .total_size = 512, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - /* Chip features an optional permanent write protection - * of the first 16 kB. The erase function is the same as - * above, but 00000H to 03FFFH will not be erased. - * FIXME: add another eraser when partial erasers are - * supported. - */ - }, - .printlock = printlock_at49f, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT49F080", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F080, - .total_size = 1024, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - /* Chip features an optional permanent write protection - * of the first 16 kB. The erase function is the same as - * above, but 00000H to 03FFFH will not be erased. - * FIXME: add another eraser when partial erasers are - * supported. - */ - }, - .printlock = printlock_at49f, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - /* 'top' version of AT49F080. equal in all aspects but the boot block address */ - .vendor = "Atmel", - .name = "AT49F080T", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F080T, - .total_size = 1024, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - /* Chip features an optional permanent write protection - * of the first 16 kB. The erase function is the same as - * above, but FC000H to FFFFFH will not be erased. - * FIXME: add another eraser when partial erasers are - * supported. - */ - }, - .printlock = printlock_at49f, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT49LH002", - .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49LH002, - .total_size = 256, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = NULL, /* TODO: Implement. */ - }, { - .eraseblocks = { - {64 * 1024, 4}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT49LH00B4", - .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49LH00B4, - .total_size = 512, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 2}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 7}, - }, - .block_erase = NULL, /* TODO: Implement. */ - }, { - .eraseblocks = { - {64 * 1024, 8}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT49LH004", - .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49LH004, - .total_size = 512, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, { - .eraseblocks = { - {64 * 1024, 8}, - }, - .block_erase = NULL, /* TODO: Implement. */ - }, - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Catalyst", - .name = "CAT28F512", - .bustype = BUS_PARALLEL, - .manufacture_id = CATALYST_ID, - .model_id = CATALYST_CAT28F512, - .total_size = 64, - .page_size = 0, /* unused */ - .feature_bits = 0, - .tested = {.probe = OK, .read = OK, .erase = BAD, .write = BAD }, - .probe = probe_jedec, /* FIXME! */ - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = NULL, /* TODO */ - }, - }, - .write = NULL, /* TODO */ - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Bright", - .name = "BM29F040", - .bustype = BUS_PARALLEL, - .manufacture_id = BRIGHT_ID, - .model_id = BRIGHT_BM29F040, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "ESMT", - .name = "F49B002UA", - .bustype = BUS_PARALLEL, - .manufacture_id = ESMT_ID, - .model_id = ESMT_F49B002UA, - .total_size = 256, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 1}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "ESMT", - .name = "F25L008A", - .bustype = BUS_SPI, - .manufacture_id = ESMT_ID, - .model_id = ESMT_F25L008A, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ESMT", - .name = "F25L32PA", - .bustype = BUS_SPI, - .manufacture_id = ESMT_ID, - .model_id = ESMT_F25L32PA, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_bpl, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B05", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B05, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B05T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B05, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B10", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 3}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B10T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {32 * 1024, 3}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B20", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 3} - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B20T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B40", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 7} - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B40T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B80", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 15} - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B80T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 15}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B16", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 31}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B16T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 31}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B32", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B32, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 63}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B32T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B32, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 63}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B64", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B64, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 127}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B64T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B64, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 127}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F05", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F05, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F10", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F20", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F40", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PROBE, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F80", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F16", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F32", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F32, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F64", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F64, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25Q40", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q40, - .total_size = 512, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25Q80(A)", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q80, - .total_size = 1024, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - /* Note: EN25D16 is an evil twin which shares the model ID - but has different write protection capabilities */ - .vendor = "Eon", - .name = "EN25Q16", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q16, - .total_size = 2048, - .page_size = 256, - /* OTP: D16 512B/Q16 128B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - /* not supported by Q16 version */ - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25Q32(A/B)", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q32, - .total_size = 4096, - .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25Q64", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q64, - .total_size = 8192, - .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25Q128", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q128, - .total_size = 16384, - .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - }, - - { - .vendor = "Eon", - .name = "EN25QH16", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25QH16, - .total_size = 2048, - .page_size = 256, - /* supports SFDP */ - /* OTP: 512B total; enter 0x3A */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 2048, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 2048, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25QH32", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25QH32, - .total_size = 4096, - .page_size = 256, - /* supports SFDP */ - /* OTP: 512B total; enter 0x3A */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 4096, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 4096, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25QH64", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25QH64, - .total_size = 8192, - .page_size = 256, - /* supports SFDP */ - /* OTP: 512B total; enter 0x3A */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 8192 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 8192 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25QH128", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25QH128, - .total_size = 16384, - .page_size = 256, - /* supports SFDP */ - /* OTP: 512B total; enter 0x3A */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25S10", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S10, - .total_size = 128, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN25S20", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S20, - .total_size = 256, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN25S40", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S40, - .total_size = 512, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN25S80", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S80, - .total_size = 1024, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN25S16", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S16, - .total_size = 2048, - .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_en25s_wp, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN25S32", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S32, - .total_size = 4096, - .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4096 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4096 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_en25s_wp, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN25S64", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S64, - .total_size = 8192, - .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8192 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8192 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_en25s_wp, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN29F010", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29F010, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {16 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Eon", - .name = "EN29F002(A)(N)B", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29F002B, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Eon", - .name = "EN29F002(A)(N)T", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29F002T, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Eon", - .name = "EN29LV640B", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29LV640B, - .total_size = 8192, - .page_size = 8192, - .feature_bits = FEATURE_ADDR_SHIFTED, - .tested = TEST_OK_PREW, - .probe = probe_en29lv640b, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127}, - }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_en29lv640b, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN29GL064(A)B", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29GL064B, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN29GL064(A)T", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29GL064T, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 127}, - {8 * 1024, 8}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN29GL064H/L", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29GL064HL, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN29GL128", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29GL128HL, - .total_size = 16384, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Fujitsu", - .name = "MBM29F004BC", - .bustype = BUS_PARALLEL, - .manufacture_id = FUJITSU_ID, - .model_id = FUJITSU_MBM29F004BC, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 7}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = NULL, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Fujitsu", - .name = "MBM29F004TC", - .bustype = BUS_PARALLEL, - .manufacture_id = FUJITSU_ID, - .model_id = FUJITSU_MBM29F004TC, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = NULL, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - /* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */ - .vendor = "Fujitsu", - .name = "MBM29F400BC", - .bustype = BUS_PARALLEL, - .manufacture_id = FUJITSU_ID, - .model_id = FUJITSU_MBM29F400BC, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 7}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ - }, - - { - .vendor = "Fujitsu", - .name = "MBM29F400TC", - .bustype = BUS_PARALLEL, - .manufacture_id = FUJITSU_ID, - .model_id = FUJITSU_MBM29F400TC, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ - }, - - { - .vendor = "Fujitsu", - .name = "MBM29LV160BE", - .bustype = BUS_PARALLEL, - .manufacture_id = FUJITSU_ID, - .model_id = FUJITSU_MBM29LV160BE, - .total_size = 2 * 1024, - .page_size = 0, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 31}, - }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, /* Supports a fast mode too */ - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -70, others 2.7-3.6V */ - }, - - { - .vendor = "Fujitsu", - .name = "MBM29LV160TE", - .bustype = BUS_PARALLEL, - .manufacture_id = FUJITSU_ID, - .model_id = FUJITSU_MBM29LV160TE, - .total_size = 2 * 1024, - .page_size = 0, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 31}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, /* Supports a fast mode too */ - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -70, others 2.7-3.6V */ - }, - - { - .vendor = "GigaDevice", - .name = "GD25LQ32", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25LQ32, - .total_size = 4096, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q512", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q512, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q10", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q20(B)", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q40(B)", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q80(B)", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q80, - .total_size = 1024, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q16(B)", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q16, - .total_size = 2048, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q32(B)", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q32, - .total_size = 4096, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q64(B)", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q64, - .total_size = 8192, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q128B", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q128, - .total_size = 16384, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 512} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25T80", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25T80, - .total_size = 1024, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Hyundai", - .name = "HY29F002T", - .bustype = BUS_PARALLEL, - .manufacture_id = HYUNDAI_ID, - .model_id = HYUNDAI_HY29F002T, - .total_size = 256, - .page_size = 256 * 1024, - .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -45, others 4.5-5.5V */ - }, - - { - .vendor = "Hyundai", - .name = "HY29F002B", - .bustype = BUS_PARALLEL, - .manufacture_id = HYUNDAI_ID, - .model_id = HYUNDAI_HY29F002B, - .total_size = 256, - .page_size = 256 * 1024, - .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -45, others 4.5-5.5V */ - }, - - { - .vendor = "Hyundai", - .name = "HY29F040A", - .bustype = BUS_PARALLEL, - .manufacture_id = HYUNDAI_ID, - .model_id = HYUNDAI_HY29F040A, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Intel", - .name = "25F160S33B8", - .bustype = BUS_SPI, - .manufacture_id = INTEL_ID, - .model_id = INTEL_25F160S33B8, - .total_size = 2048, - .page_size = 256, - /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 8 so-called "parameter blocks" with - * opcode 0x40. Trying to access an address outside these 8 8kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 31} // inaccessible - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, - .unlock = spi_disable_blockprotect_bp2_ep_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* also fast read 0x0B */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Intel", - .name = "25F160S33T8", - .bustype = BUS_SPI, - .manufacture_id = INTEL_ID, - .model_id = INTEL_25F160S33T8, - .total_size = 2048, - .page_size = 256, - /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 8 so-called "parameter blocks" with - * opcode 0x40. Trying to access an address outside these 8 8kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {64 * 1024, 31}, // inaccessible - {8 * 1024, 8} - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, - .unlock = spi_disable_blockprotect_bp2_ep_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* also fast read 0x0B */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Intel", - .name = "25F320S33B8", - .bustype = BUS_SPI, - .manufacture_id = INTEL_ID, - .model_id = INTEL_25F320S33B8, - .total_size = 4096, - .page_size = 256, - /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 8 so-called "parameter blocks" with - * opcode 0x40. Trying to access an address outside these 8 8kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 63} // inaccessible - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, - .unlock = spi_disable_blockprotect_bp2_ep_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* also fast read 0x0B */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Intel", - .name = "25F320S33T8", - .bustype = BUS_SPI, - .manufacture_id = INTEL_ID, - .model_id = INTEL_25F320S33T8, - .total_size = 4096, - .page_size = 256, - /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 8 so-called "parameter blocks" with - * opcode 0x40. Trying to access an address outside these 8 8kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {64 * 1024, 63}, // inaccessible - {8 * 1024, 8} - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, - .unlock = spi_disable_blockprotect_bp2_ep_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* also fast read 0x0B */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Intel", - .name = "25F640S33B8", - .bustype = BUS_SPI, - .manufacture_id = INTEL_ID, - .model_id = INTEL_25F640S33B8, - .total_size = 8192, - .page_size = 256, - /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 8 so-called "parameter blocks" with - * opcode 0x40. Trying to access an address outside these 8 8kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127} // inaccessible - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, - .unlock = spi_disable_blockprotect_bp2_ep_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* also fast read 0x0B */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Intel", - .name = "25F640S33T8", - .bustype = BUS_SPI, - .manufacture_id = INTEL_ID, - .model_id = INTEL_25F640S33T8, - .total_size = 8192, - .page_size = 256, - /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 8 so-called "parameter blocks" with - * opcode 0x40. Trying to access an address outside these 8 8kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {64 * 1024, 127}, // inaccessible - {8 * 1024, 8} - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, - .unlock = spi_disable_blockprotect_bp2_ep_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* also fast read 0x0B */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Intel", - .name = "28F001BN/BX-B", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F001B, - .total_size = 128, - .page_size = 128 * 1024, /* 8k + 2x4k + 112k */ - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 1}, - {4 * 1024, 2}, - {112 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Intel", - .name = "28F001BN/BX-T", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F001T, - .total_size = 128, - .page_size = 128 * 1024, /* 112k + 2x4k + 8k */ - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {112 * 1024, 1}, - {4 * 1024, 2}, - {8 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Intel", - .name = "28F002BC/BL/BV/BX-T", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F002T, - .total_size = 256, - .page_size = 256 * 1024, - .tested = TEST_OK_PRE, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 1}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - }, - - { - .vendor = "Intel", - .name = "28F008S3/S5/SC", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F004S3, - .total_size = 512, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_82802ab, - }, - }, - .unlock = unlock_28f004s5, - .write = write_82802ab, - .read = read_memmapped, - }, - - { - .vendor = "Intel", - .name = "28F004B5/BE/BV/BX-B", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F004B, - .total_size = 512, - .page_size = 128 * 1024, /* maximal block size */ - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {96 * 1024, 1}, - {128 * 1024, 3}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - }, - - { - .vendor = "Intel", - .name = "28F004B5/BE/BV/BX-T", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F004T, - .total_size = 512, - .page_size = 128 * 1024, /* maximal block size */ - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 3}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - }, - - { - .vendor = "Intel", - .name = "28F400BV/BX/CE/CV-B", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F400B, - .total_size = 512, - .page_size = 128 * 1024, /* maximal block size */ - .feature_bits = FEATURE_ADDR_SHIFTED, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {96 * 1024, 1}, - {128 * 1024, 3}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - }, - - { - .vendor = "Intel", - .name = "28F400BV/BX/CE/CV-T", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F400T, - .total_size = 512, - .page_size = 128 * 1024, /* maximal block size */ - .feature_bits = FEATURE_ADDR_SHIFTED, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 3}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - }, - - { - .vendor = "Intel", - .name = "82802AB", - .bustype = BUS_FWH, - .manufacture_id = INTEL_ID, - .model_id = INTEL_82802AB, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_82802ab, - }, - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Intel", - .name = "82802AC", - .bustype = BUS_FWH, - .manufacture_id = INTEL_ID, - .model_id = INTEL_82802AC, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_82802ab, - }, - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "ISSI", - .name = "IS29GL064B", - .bustype = BUS_PARALLEL, - .manufacture_id = ISSI_ID, - .model_id = ISSI_PMC_IS29GL064B, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ISSI", - .name = "IS29GL064T", - .bustype = BUS_PARALLEL, - .manufacture_id = ISSI_ID, - .model_id = ISSI_PMC_IS29GL064T, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 127}, - {8 * 1024, 8}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ISSI", - .name = "IS29GL064H/L", - .bustype = BUS_PARALLEL, - .manufacture_id = ISSI_ID, - .model_id = ISSI_PMC_IS29GL064HL, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ISSI", - .name = "IS29GL128H/L", - .bustype = BUS_PARALLEL, - .manufacture_id = ISSI_ID, - .model_id = ISSI_PMC_IS29GL128HL, - .total_size = 16384, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX23L1654", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX23L1654, - .total_size = 2048, - .page_size = 256, - .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, /* MX23L1654 is a mask ROM, so it is read-only */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {3000, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX23L3254", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX23L3254, - .total_size = 4096, - .page_size = 256, - .tested = {.probe = OK, .read = OK, .erase = NA, .write = NA}, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, /* MX23L3254 is a mask ROM, so it is read-only */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {3000, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX23L6454", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX23L6454, - .total_size = 8192, - .page_size = 256, - .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, /* MX23L6454 is a mask ROM, so it is read-only */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {3000, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX23L12854", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX23L12854, - .total_size = 16384, - .page_size = 256, - .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, /* MX23L12854 is a mask ROM, so it is read-only */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {3000, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L512(E)/MX25V512(C)", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L512, - .total_size = 64, - .page_size = 256, - /* MX25L512E supports SFDP */ - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported, MX25L512E supports dual I/O */ - .voltage = {2700, 3600}, /* 2.35-3.6V for MX25V512(C) */ - }, - - { - .vendor = "Macronix", - .name = "MX25L1005(C)/MX25L1006E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L1005, - .total_size = 128, - .page_size = 256, - /* MX25L1006E supports SFDP */ - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported, MX25L1006E supports dual I/O */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L2005(C)", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L2005, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L4005(A/C)", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L4005, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L8005/MX25V8005", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L8005, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, /* 2.35-3.6V for MX25V8005 */ - }, - - { - .vendor = "Macronix", - .name = "MX25L1605", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L1605, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit6: error flag */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L1605A/MX25L1606E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L1605, - .total_size = 2048, - .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 (MX25L1606E only) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* MX25L1605A bp2 only */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L1605D/MX25L1608D/MX25L1673E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L1605, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: Continuously Program (CP) mode */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L1635D", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L1635D, - .total_size = 2048, - .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L1635E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L1635E, - .total_size = 2048, - .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L3205(A)", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L3205, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit6: error flag */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L3205D/MX25L3208D", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L3205, - .total_size = 4096, - .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: CP mode */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L3206E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L3205, - .total_size = 4096, - .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L3273E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L3205, - .total_size = 4096, - .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L3235D", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L3235D, - .total_size = 4096, - .page_size = 256, - /* OTP: 256B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L6405(D)", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L6405, - .total_size = 8192, - .page_size = 256, - /* MX25L6405D has 64B of OTP; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 has different meanings */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L6406E/MX25L6436E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L6405, - .total_size = 8192, - .page_size = 256, - /* OTP: 06E 64B/36E 512B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 for 36E is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L6445E/MX25L6473E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L6405, - .total_size = 8192, - .page_size = 256, - /* supports SFDP */ - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L12805(D)", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L12805, - .total_size = 16384, - .page_size = 256, - /* MX25L12805D has 64B of OTP; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* MX25L12805D: Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25U1635E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25U1635E, - .total_size = 2048, - .page_size = 256, - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - /* TODO: security register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1650, 2000}, - }, - - { - .vendor = "Macronix", - .name = "MX25U3235E/F", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25U3235E, - .total_size = 4096, - .page_size = 256, - /* F model supports SFDP */ - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - /* TODO: security register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1650, 2000}, - }, - - { - .vendor = "Macronix", - .name = "MX25U6435E/F", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25U6435E, - .total_size = 8192, - .page_size = 256, - /* F model supports SFDP */ - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - /* TODO: security register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1650, 2000}, - }, - - { - .vendor = "Macronix", - .name = "MX25U12835F", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25U12835E, - .total_size = 16384, - .page_size = 256, - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 512} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - /* TODO: security register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1650, 2000}, - }, - - { - .vendor = "Macronix", - .name = "MX29F001B", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F001B, - .total_size = 128, - .page_size = 32 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 1}, - {4 * 1024, 2}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29F001T", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F001T, - .total_size = 128, - .page_size = 32 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 1}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {4 * 1024, 2}, - {8 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29F002(N)B", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F002B, - .total_size = 256, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29F002(N)T", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F002T, - .total_size = 256, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29F022(N)B", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F022B, - .total_size = 256, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29F022(N)T", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F022T, - .total_size = 256, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29F040", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F040, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL320EB", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL320EB, - .total_size = 4096, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 63}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL320ET", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL320ET, - .total_size = 4096, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 63}, - {8 * 1024, 8}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL320EH/L", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL320EHL, - .total_size = 4096, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL640EB", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL640EB, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL640ET", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL640ET, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 127}, - {8 * 1024, 8}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL640EH/L", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL640EHL, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL128F", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL128F, - .total_size = 16384, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29LV040", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29LV040, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P05-A", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P05A, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - /* The ST M25P05 is a bit of a problem. It has the same ID as the - * ST M25P05-A in RES mode, but supports only 128 byte writes instead - * of 256 byte writes. We rely heavily on the fact that probe_spi_res1 - * only is successful if RDID does not work. - */ - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P05", - .bustype = BUS_SPI, - .manufacture_id = 0, /* Not used. */ - .model_id = ST_M25P05_RES, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res1, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* 128 */ - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P10-A", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P10A, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PRE, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - /* The ST M25P10 has the same problem as the M25P05. */ - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P10", - .bustype = BUS_SPI, - .manufacture_id = 0, /* Not used. */ - .model_id = ST_M25P10_RES, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res1, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* 128 */ - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", /* Numonyx */ - .name = "M25P20", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P20-old", - .bustype = BUS_SPI, - .manufacture_id = 0, /* Not used. */ - .model_id = ST_M25P20_RES, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_res1, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", /* Numonyx */ - .name = "M25P40", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P40-old", - .bustype = BUS_SPI, - .manufacture_id = 0, /* Not used. */ - .model_id = ST_M25P40_RES, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res1, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P80", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P16", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P32", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P32, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P64", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P64, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P128", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P128, - .total_size = 16384, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PE10", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PE10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PE20", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PE20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PE40", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PE40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PE80", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PE80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PE16", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PE16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PX80", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PX80, - .total_size = 1024, - .page_size = 256, - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { { 4 * 1024, 256 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PX16", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PX16, - .total_size = 2048, - .page_size = 256, - /* OTP: 64B total; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 512 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2300, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PX32", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PX32, - .total_size = 4096, - .page_size = 256, - /* OTP: 64B total; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PRE, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 1024 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PX64", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PX64, - .total_size = 8192, - .page_size = 256, - /* OTP: 64B total; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 2048 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M45PE10", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M45PE10, - .total_size = 128, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256, 512} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M45PE20", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M45PE20, - .total_size = 256, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256, 1024} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M45PE40", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M45PE40, - .total_size = 512, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256, 2048} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M45PE80", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M45PE80, - .total_size = 1024, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256, 4096} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M45PE16", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M45PE16, - .total_size = 2048, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256, 8192} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q016", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q016__1E, - .total_size = 2048, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1700, 2000}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q032..1E", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q032__1E, - .total_size = 4096, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1700, 2000}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q032..3E", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q032__3E, - .total_size = 4096, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q064..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */ - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q064__1E, - .total_size = 8192, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1700, 2000}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q064..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */ - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q064__3E, - .total_size = 8192, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q128..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */ - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q128__1E, - .total_size = 16384, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 4096 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1700, 2000}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q128..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */ - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q128__3E, - .total_size = 16384, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 4096 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29C51000B", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29C51000B, - .total_size = 64, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29C51000T", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29C51000T, - .total_size = 64, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29C51400B", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29C51400B, - .total_size = 512, - .page_size = 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {1024, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29C51400T", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29C51400T, - .total_size = 512, - .page_size = 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {1024, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29LC51000", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29LC51000, - .total_size = 64, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29LC51001", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29LC51001, - .total_size = 128, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 256} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29LC51002", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29LC51002, - .total_size = 256, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Nantronics", - .name = "N25S10", - .bustype = BUS_SPI, - .manufacture_id = NANTRONICS_ID_NOPREFIX, - .model_id = NANTRONICS_N25S10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Nantronics", - .name = "N25S20", - .bustype = BUS_SPI, - .manufacture_id = NANTRONICS_ID_NOPREFIX, - .model_id = NANTRONICS_N25S20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Nantronics", - .name = "N25S40", - .bustype = BUS_SPI, - .manufacture_id = NANTRONICS_ID_NOPREFIX, - .model_id = NANTRONICS_N25S40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Nantronics", - .name = "N25S80", - .bustype = BUS_SPI, - .manufacture_id = NANTRONICS_ID_NOPREFIX, - .model_id = NANTRONICS_N25S80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Nantronics", - .name = "N25S16", - .bustype = BUS_SPI, - .manufacture_id = NANTRONICS_ID_NOPREFIX, - .model_id = NANTRONICS_N25S16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LD256C", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LD256C, - .total_size = 32, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 8} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 8} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 1} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {32 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {32 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2700, 3600}, - }, - { - .vendor = "PMC", - .name = "Pm25LD512(C)", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LD512, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2300, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LD010(C)", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LD010, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD010 */ - }, - - { - .vendor = "PMC", - .name = "Pm25LD020(C)", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LD020, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD020 */ - }, - - { - .vendor = "PMC", - .name = "Pm25LD040(C)", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV040, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD040 */ - }, - -{ - .vendor = "PMC", - .name = "Pm25LV512(A)", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM25LV512, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, /* The continuation code is transferred as the 3rd byte m( */ - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LV010", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM25LV010, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_res2, /* The continuation code is transferred as the 3rd byte m( */ - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LV010A", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV010, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LV020", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV020, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LV040", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV040, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LV080B", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV080B, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LV016B", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV016B, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm29F002T", - .bustype = BUS_PARALLEL, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM29F002T, - .total_size = 256, - .page_size = 8 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 1}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "PMC", - .name = "Pm29F002B", - .bustype = BUS_PARALLEL, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM29F002B, - .total_size = 256, - .page_size = 8 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {96 * 1024, 1}, - {128 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "PMC", - .name = "Pm39LV010", - .bustype = BUS_PARALLEL, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM39F010, /* Pm39LV010 and Pm39F010 have identical IDs but different voltage */ - .total_size = 128, - .page_size = 4096, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm39LV020", - .bustype = BUS_PARALLEL, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM39LV020, - .total_size = 256, - .page_size = 4096, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm39LV040", - .bustype = BUS_PARALLEL, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM39LV040, - .total_size = 512, - .page_size = 4096, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm39LV512", - .bustype = BUS_PARALLEL, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM39LV512, - .total_size = 64, - .page_size = 4096, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm49FL002", - .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM49FL002, - .total_size = 256, - .page_size = 16 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .unlock = unlock_regspace2_uniform_32k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm49FL004", - .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM49FL004, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW106", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW106, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {2 * 1024, 64} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, /* FIXME: Add ERSER error flag. */ - .unlock = spi_disable_blockprotect_bp1_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW406A", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW406A, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FU406B", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FU406B, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2300, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW203A", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW203A, - .total_size = 256, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 1024} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW403A", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW403A, - .total_size = 512, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256, 2 * 1024} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW418A", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW418A, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* some quad-read supported ("HD_READ mode") */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW806", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW806, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW808", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW808, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {8 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* some quad-read supported ("HD_READ mode") */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sharp", - .name = "LH28F008BJT-BTLZ1", - .bustype = BUS_PARALLEL, - .manufacture_id = SHARP_ID, - .model_id = SHARP_LH28F008BJ__PB, - .total_size = 1024, - .page_size = 64 * 1024, - .tested = TEST_OK_PREW, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 15} - }, - .block_erase = erase_block_82802ab, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_sector_49lfxxxc, - } - }, - .unlock = unlock_lh28f008bjt, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sharp", - .name = "LHF00L04", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = SHARP_ID, - .model_id = SHARP_LHF00L04, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 15}, - {8 * 1024, 8} - }, - .block_erase = erase_block_82802ab, - }, { - .eraseblocks = { - {1024 * 1024, 1} - }, - .block_erase = NULL, /* 30 D0, only in A/A mux mode */ - }, - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL004A", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL004A, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL008A", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL008A, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PRE, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL016A", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL016A, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL032A/P", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL032A, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL064A/P", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL064A, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL204K", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL204, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL208K", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL208, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL116K/S25FL216K", /* FIXME: separate them */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL216, - .total_size = 2048, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (S25FL116K only) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 2048 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 2048 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL132K", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL132K, - .total_size = 4096, - .page_size = 256, - /* OTP: 768B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 4096 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 4096 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* TODO: improve */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL164K", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL164K, - .total_size = 8192, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 8192 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 8192 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* TODO: improve */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL128P......0", /* uniform 64 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL128P......1", /* uniform 256kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL128S......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 256, - /* supports 4B addressing */ - /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - /* This chip supports erasing of the 32 so-called "parameter sectors" with - * opcode 0x20. Trying to access an address outside these 4kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {4 * 1024, 32}, - {64 * 1024, 254} // inaccessible - }, - .block_erase = spi_block_erase_20, - }, { */ - .eraseblocks = { { 64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL128S......1", /* uniform 256 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 512, - /* supports 4B addressing */ - /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL129P......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 256, - /* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - /* FIXME: This chip supports erasing of the 32 so-called "parameter sectors" with - * opcode 0x20. Trying to access an address outside these 4kB blocks does have no - * effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {4 * 1024, 32}, - {64 * 1024, 254} // inaccessible - }, - .block_erase = spi_block_erase_20, - }, { */ - /* FIXME: Additionally it also supports erase opcode 40h for the respective 2*4 kB pairs - .eraseblocks = { - {8 * 1024, 16}, - {64 * 1024, 254} // inaccessible - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { { 64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL129P......1", /* uniform 256 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 512, - /* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25LF020A", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF020_REMS, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rems, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25LF040A", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF040_REMS, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25LF080(A)", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF080_REMS, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF512(A)", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF512_REMS, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rems, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, /* Supported by SST25VF512A only */ - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, /* Supported by SST25VF512A only */ - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, /* Fast read (0x0B) supported by SST25VF512A only */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF010(A)", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF010_REMS, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rems, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, /* Supported by SST25VF010A only */ - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, /* Supported by SST25VF010A only */ - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, /* Fast read (0x0B) supported by SST25VF010A only */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF020", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF020_REMS, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_UNTESTED, - .probe = probe_spi_rems, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, /* only */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF020B", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF020B, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 and 2nd SR */ - .unlock = spi_disable_blockprotect, /* FIXME: 2nd SR */ - .write = spi_aai_write, /* AAI supported (0xAD) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF040", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF040_REMS, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PR, - .probe = probe_spi_rems, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF040B", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF040B, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25vf040b, - .unlock = spi_disable_blockprotect, - .write = spi_aai_write, /* AAI supported (0xAD) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF040B.REMS", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF040B_REMS, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rems, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25vf040b, - .unlock = spi_disable_blockprotect, - .write = spi_aai_write, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF080B", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF080B, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_aai_write, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF016B", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = 0x41, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_OK_PREW, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25vf016, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF032B", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF032B, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_aai_write, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF064C", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF064C, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25WF512", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25WF512, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {1024 * 64, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 64, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_aai_write, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "SST", - .name = "SST25WF010", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25WF010, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {1024 * 128, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 128, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_aai_write, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "SST", - .name = "SST25WF020", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25WF020, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 256, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 256, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_aai_write, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "SST", - .name = "SST25WF040", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25WF040, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 512, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 512, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_aai_write, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "SST", - .name = "SST25WF080", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25WF080, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* *does* have a BP3 but it is useless */ - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_aai_write, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "SST", - .name = "SST28SF040A", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST28SF040, - .total_size = 512, - .page_size = 256, - .feature_bits = 0, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst28sf040.c) */ - .block_erasers = - { - { - .eraseblocks = { {128, 4096} }, - .block_erase = erase_sector_28sf040, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_28sf040, - } - }, - .unlock = unprotect_28sf040, - .write = write_28sf040, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST29EE010", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST29EE010, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST29LE010", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST29LE010, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST29EE020A", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST29EE020A, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST29LE020", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST29LE020, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST39SF512", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39SF512, - .total_size = 64, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST39SF010A", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39SF010, - .total_size = 128, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST39SF020A", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39SF020, - .total_size = 256, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST39SF040", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39SF040, - .total_size = 512, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST39VF512", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39VF512, - .total_size = 64, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST39VF010", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39VF010, - .total_size = 128, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST39VF020", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39VF020, - .total_size = 256, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST39VF040", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39VF040, - .total_size = 512, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST39VF080", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39VF080, - .total_size = 1024, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF002A/B", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = SST_ID, - .model_id = SST_SST49LF002A, - .total_size = 256, - .page_size = 16 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ - } - }, - .printlock = printlock_sst_fwhub, - .unlock = unlock_sst_fwhub, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF003A/B", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = SST_ID, - .model_id = SST_SST49LF003A, - .total_size = 384, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 96} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 6} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {384 * 1024, 1} }, - .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ - } - }, - .printlock = printlock_sst_fwhub, - .unlock = unlock_sst_fwhub, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - /* Contrary to the data sheet, TBL# on the SST49LF004B affects the top 128kB (instead of 64kB) - * and is only honored for 64k block erase, but not 4k sector erase. - */ - .vendor = "SST", - .name = "SST49LF004A/B", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = SST_ID, - .model_id = SST_SST49LF004A, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ - }, - }, - .printlock = printlock_sst_fwhub, - .unlock = unlock_sst_fwhub, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF004C", - .bustype = BUS_FWH, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF004C, - .total_size = 512, - .page_size = 4 * 1024, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_49lfxxxc, - }, { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_1, - .unlock = unlock_regspace2_block_eraser_1, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF008A", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = SST_ID, - .model_id = SST_SST49LF008A, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ - } - }, - .printlock = printlock_sst_fwhub, - .unlock = unlock_sst_fwhub, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF008C", - .bustype = BUS_FWH, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF008C, - .total_size = 1024, - .page_size = 4 * 1024, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = erase_sector_49lfxxxc, - }, { - .eraseblocks = { - {64 * 1024, 15}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_1, - .unlock = unlock_regspace2_block_eraser_1, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF016C", - .bustype = BUS_FWH, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF016C, - .total_size = 2048, - .page_size = 4 * 1024, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = erase_sector_49lfxxxc, - }, { - .eraseblocks = { - {64 * 1024, 31}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_1, - .unlock = unlock_regspace2_block_eraser_1, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF020", - .bustype = BUS_LPC, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF020, - .total_size = 256, - .page_size = 16 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = NULL, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF020A", - .bustype = BUS_LPC, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF020A, - .total_size = 256, - .page_size = 4 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = NULL, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF040", - .bustype = BUS_LPC, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF040, - .total_size = 512, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = NULL, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF040B", - .bustype = BUS_LPC, /* A/A Mux */ - .manufacture_id = SST_ID, - .model_id = SST_SST49LF040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = 1, /* 150ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = NULL, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF080A", - .bustype = BUS_LPC, /* A/A Mux */ - .manufacture_id = SST_ID, - .model_id = SST_SST49LF080A, - .total_size = 1024, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = NULL, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF160C", - .bustype = BUS_LPC, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF160C, - .total_size = 2048, - .page_size = 4 * 1024, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = erase_sector_49lfxxxc, - }, { - .eraseblocks = { - {64 * 1024, 31}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_1, - .unlock = unlock_regspace2_block_eraser_1, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "ST", - .name = "M29F002B", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29F002B, - .total_size = 256, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -X, others 4.5-5.5V */ - }, - - { - .vendor = "ST", - .name = "M29F002T/NT", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29F002T, - .total_size = 256, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -X, others 4.5-5.5V */ - }, - - { - .vendor = "ST", - .name = "M29F040B", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29F040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* datasheet specifies no timing */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - /* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */ - .vendor = "ST", - .name = "M29F400BB", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29F400BB, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 7}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - { - /* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */ - .vendor = "ST", - .name = "M29F400BT", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29F400BT, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "ST", - .name = "M29W010B", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29W010B, - .total_size = 128, - .page_size = 16 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {16 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ST", - .name = "M29W040B", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29W040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ST", - .name = "M29W512B", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29W512B, - .total_size = 64, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ST", - .name = "M50FLW040A", - .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FLW040A, - .total_size = 512, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 16}, /* sector */ - {64 * 1024, 5}, /* block */ - {4 * 1024, 16}, /* sector */ - {4 * 1024, 16}, /* sector */ - }, - .block_erase = erase_sector_stm50, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_82802ab, - } - }, - .write = write_82802ab, - .unlock = unlock_regspace2_uniform_64k, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FLW040B", - .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FLW040B, - .total_size = 512, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 16}, /* sector */ - {4 * 1024, 16}, /* sector */ - {64 * 1024, 5}, /* block */ - {4 * 1024, 16}, /* sector */ - }, - .block_erase = erase_sector_stm50, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_82802ab, - } - }, - .write = write_82802ab, - .unlock = unlock_regspace2_uniform_64k, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FLW080A", - .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FLW080A, - .total_size = 1024, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 16}, /* sector */ - {64 * 1024, 13}, /* block */ - {4 * 1024, 16}, /* sector */ - {4 * 1024, 16}, /* sector */ - }, - .block_erase = erase_sector_stm50, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FLW080B", - .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FLW080B, - .total_size = 1024, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 16}, /* sector */ - {4 * 1024, 16}, /* sector */ - {64 * 1024, 13}, /* block */ - {4 * 1024, 16}, /* sector */ - }, - .block_erase = erase_sector_stm50, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FW002", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FW002, - .total_size = 256, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, { - .eraseblocks = { {256 * 1024, 1}, }, - .block_erase = NULL, /* Only in A/A mux mode */ - } - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FW016", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FW016, - .total_size = 2048, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = erase_block_82802ab, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FW040", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FW040, - .total_size = 512, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_82802ab, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FW080", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FW080, - .total_size = 1024, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_82802ab, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50LPW080", - .bustype = BUS_LPC, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50LPW080, - .total_size = 1024, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_82802ab, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50LPW116", - .bustype = BUS_LPC, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50LPW116, - .total_size = 2048, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 16}, - {64 * 1024, 30}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{F,S,V}29C51001B", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C51001B, - .total_size = 128, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {512, 256} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{F,S,V}29C51001T", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C51001T, - .total_size = 128, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {512, 256} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{F,S,V}29C51002B", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C51002B, - .total_size = 256, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {512, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{F,S,V}29C51002T", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C51002T, - .total_size = 256, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {512, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{F,S,V}29C51004B", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C51004B, - .total_size = 512, - .page_size = 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {1024, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{F,S,V}29C51004T", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C51004T, - .total_size = 512, - .page_size = 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {1024, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{S,V}29C31004B", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C31004B, - .total_size = 512, - .page_size = 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {1024, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{S,V}29C31004T", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C31004T, - .total_size = 512, - .page_size = 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {1024, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "TI", - .name = "TMS29F002RB", - .bustype = BUS_PARALLEL, - .manufacture_id = TI_OLD_ID, - .model_id = TI_TMS29F002RB, - .total_size = 256, - .page_size = 16384, /* Non-uniform sectors */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "TI", - .name = "TMS29F002RT", - .bustype = BUS_PARALLEL, - .manufacture_id = TI_OLD_ID, - .model_id = TI_TMS29F002RT, - .total_size = 256, - .page_size = 16384, /* Non-uniform sectors */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Winbond", - .name = "W25Q40.V", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q40_V, - .total_size = 512, - .page_size = 256, - /* supports SFDP */ - /* OTP: 756B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25Q80.V", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q80_V, - .total_size = 1024, - .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25Q16.V", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q16_V, - .total_size = 2048, - .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25Q32.V", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q32_V, - .total_size = 4096, - .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25Q64.V", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q64_V, - .total_size = 8192, - .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25Q128.V", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q128_V, - .total_size = 16384, - .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 512} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25Q20.W", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q20_W, - .total_size = 256, - .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ - }, - - { - .vendor = "Winbond", - .name = "W25Q40.W", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q40_W, - .total_size = 512, - .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ - }, - - { - .vendor = "Winbond", - .name = "W25Q80.W", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q80_W, - .total_size = 1024, - .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ - }, - - { - .vendor = "Winbond", - .name = "W25Q16.W", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q16_W, - .total_size = 2048, - .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ - }, - - { - .vendor = "Winbond", - .name = "W25Q32.W", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q32_W, - .total_size = 4096, - .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ - }, - - { - .vendor = "Winbond", - .name = "W25Q64.W", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q64_W, - .total_size = 8192, - .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ - }, - - { - .vendor = "Winbond", - .name = "W25X10", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25X20", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25X40", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25X80", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25X16", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25X32", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X32, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25X64", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X64, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PROBE, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29C010(M)/W29C011A/W29EE011/W29EE012-old", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W29C010, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PREW, - .probe = probe_w29ee011, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (w29ee011.c) */ - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - }, - - {/* W29EE011, W29EE012, W29C010M, W29C011A do not support probe_jedec according to the datasheet, but it works for newer(?) steppings. */ - .vendor = "Winbond", - .name = "W29C010(M)/W29C011A/W29EE011/W29EE012", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W29C010, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, /* used datasheet for the W29C011A */ - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - }, - - { - .vendor = "Winbond", - .name = "W29C020(C)/W29C022", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W29C020, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Winbond", - .name = "W29C040/P", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W29C040, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Winbond", - .name = "W29GL032CB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL032CB, - .total_size = 4096, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 63}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29GL032CT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL032CT, - .total_size = 4096, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 63}, - {8 * 1024, 8}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29GL032CH/L", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL032CHL, - .total_size = 4096, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29GL064CB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL064CB, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29GL064CT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL064CT, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 127}, - {8 * 1024, 8}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29GL064CH/L", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL064CHL, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29GL128C", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL128CHL, - .total_size = 16384, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39F010", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39F010, - .total_size = 128, - .page_size = 4 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39f010, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Winbond", - .name = "W39L010", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39L010, - .total_size = 128, - .page_size = 4 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39l010, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39L020", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39L020, - .total_size = 256, - .page_size = 4 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39l020, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39L040", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39L040, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39l040, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39V040A", - .bustype = BUS_LPC, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V040A, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v040a, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39V040B", - .bustype = BUS_LPC, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v040b, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39V040C", - .bustype = BUS_LPC, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V040C, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v040c, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39V040FA", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V040FA, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v040fa, - .unlock = unlock_regspace2_uniform_64k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39V040FB", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v040fb, - .unlock = unlock_regspace2_uniform_64k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program */ - }, - - { - .vendor = "Winbond", - .name = "W39V040FC", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V040C, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v040fc, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program */ - }, - - { - .vendor = "Winbond", - .name = "W39V080A", - .bustype = BUS_LPC, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V080A, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v080a, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W49F002U/N", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W49F002U, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 1}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Winbond", - .name = "W49F020", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W49F020, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PROBE, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Winbond", - .name = "W49V002A", - .bustype = BUS_LPC, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W49V002A, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W49V002FA", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W49V002FA, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39V080FA", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V080FA, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v080fa, - .unlock = unlock_regspace2_uniform_64k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program */ - }, - - { - .vendor = "Winbond", - .name = "W39V080FA (dual mode)", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V080FA_DM, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v080fa_dual, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program */ - }, - - { - .vendor = "Unknown", - .name = "SFDP-capable chip", - .bustype = BUS_SPI, - .manufacture_id = GENERIC_MANUF_ID, - .model_id = SFDP_DEVICE_ID, - /* We present our own "report this" text hence we do not - * want the default "This flash part has status UNTESTED..." - * text to be printed. */ - .tested = TEST_OK_PREW, - .probe = probe_spi_sfdp, - .unlock = spi_disable_blockprotect, /* is this safe? */ - .read = spi_chip_read, - /* FIXME: some vendor extensions define this */ - .voltage = {0}, - /* Everything below will be set by the probing function. */ - .write = NULL, - .total_size = 0, - .page_size = 0, - .feature_bits = 0, - .block_erasers = {}, - }, - - { - .vendor = "Programmer", - .name = "Opaque flash chip", - .bustype = BUS_PROG, - .manufacture_id = PROGMANUF_ID, - .model_id = PROGDEV_ID, - .total_size = 0, - .page_size = 256, - /* probe is assumed to work, rest will be filled in by probe */ - .tested = TEST_OK_PROBE, - .probe = probe_opaque, - /* eraseblock sizes will be set by the probing function */ - .block_erasers = - { - { - .block_erase = erase_opaque, - } - }, - .write = write_opaque, - .read = read_opaque, - }, - - { - .vendor = "AMIC", - .name = "unknown AMIC SPI chip", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "Atmel", - .name = "unknown Atmel SPI chip", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "Eon", - .name = "unknown Eon SPI chip", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "Macronix", - .name = "unknown Macronix SPI chip", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "PMC", - .name = "unknown PMC SPI chip", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "SST", - .name = "unknown SST SPI chip", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "ST", - .name = "unknown ST SPI chip", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "Sanyo", - .name = "unknown Sanyo SPI chip", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "Winbond", - .name = "unknown Winbond (ex Nexcom) SPI chip", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "Generic", - .name = "unknown SPI chip (RDID)", - .bustype = BUS_SPI, - .manufacture_id = GENERIC_MANUF_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .write = NULL, - }, - - { - .vendor = "Generic", - .name = "unknown SPI chip (REMS)", - .bustype = BUS_SPI, - .manufacture_id = GENERIC_MANUF_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rems, - .write = NULL, - }, - - {0} -}; - -const unsigned int flashchips_size = ARRAY_SIZE(flashchips); diff --git a/resources/flashrom/patch/flashchips.c_normal b/resources/flashrom/patch/flashchips.c_normal deleted file mode 100644 index 377232a5..00000000 --- a/resources/flashrom/patch/flashchips.c_normal +++ /dev/null @@ -1,14586 +0,0 @@ -/* - * This file is part of the flashrom project. - * - * Copyright (C) 2000 Silicon Integrated System Corporation - * Copyright (C) 2004 Tyan Corp - * Copyright (C) 2005-2008 coresystems GmbH <stepan@openbios.org> - * Copyright (C) 2006-2009 Carl-Daniel Hailfinger - * Copyright (C) 2009 Sean Nelson <audiohacked@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include "flash.h" -#include "flashchips.h" -#include "chipdrivers.h" - -/** - * List of supported flash chips. - * - * Please keep the list sorted by vendor name and chip family, so that the output of 'flashrom -L' is roughly - * alphabetically sorted. Within families keep them in order of density. - */ -const struct flashchip flashchips[] = { - - /* - * .vendor = Vendor name - * .name = Chip name - * .bustype = Supported flash bus types (Parallel, LPC...) - * .manufacture_id = Manufacturer chip ID - * .model_id = Model chip ID - * .total_size = Total size in (binary) kbytes - * .page_size = Page or eraseblock(?) size in bytes - * .tested = Test status - * .probe = Probe function - * .probe_timing = Probe function delay - * .block_erasers[] = Array of erase layouts and erase functions - * { - * .eraseblocks[] = Array of { blocksize, blockcount } - * .block_erase = Block erase function - * } - * .printlock = Chip lock status function - * .unlock = Chip unlock function - * .write = Chip write function - * .read = Chip read function - * .voltage = Voltage range in millivolt - */ - - { - .vendor = "AMD", - .name = "Am29F010A/B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29F010B, /* Same as Am29F010A */ - .total_size = 128, - .page_size = 16 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {16 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMD", - .name = "Am29F002(N)BB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29F002BB, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_SHORT_RESET | FEATURE_ADDR_2AA, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ - }, - - { - .vendor = "AMD", - .name = "Am29F002(N)BT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29F002BT, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_EITHER_RESET | FEATURE_ADDR_2AA, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ - }, - - { - .vendor = "AMD", - .name = "Am29F016D", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29F016D, - .total_size = 2 * 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMD", - .name = "Am29F040B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29F040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMD", - .name = "Am29F080B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29F080B, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMD", - .name = "Am29LV001BB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV001BB, - .total_size = 128, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 1}, - {4 * 1024, 2}, - {16 * 1024, 7}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -45R, others 2.7-3.6V */ - }, - - { - .vendor = "AMD", - .name = "Am29LV001BT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV001BT, - .total_size = 128, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 7}, - {4 * 1024, 2}, - {8 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -45R, others 2.7-3.6V */ - }, - - { - .vendor = "AMD", - .name = "Am29LV002BB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV002BB, - .total_size = 256, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -55, others 2.7-3.6V */ - }, - - { - .vendor = "AMD", - .name = "Am29LV002BT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV002BT, - .total_size = 256, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -55, others 2.7-3.6V */ - }, - - { - .vendor = "AMD", - .name = "Am29LV004BB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV004BB, - .total_size = 512, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 7}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMD", - .name = "Am29LV004BT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV004BT, - .total_size = 512, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMD", - .name = "Am29LV008BB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV008BB, - .total_size = 1024, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 15}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600} /* 3.0-3.6V for type -70R, others 2.7-3.6V */ - }, - - { - .vendor = "AMD", - .name = "Am29LV008BT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV008BT, - .total_size = 1024, - .page_size = 64 * 1024, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 15}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600} /* 3.0-3.6V for type -70R, others 2.7-3.6V */ - }, - - { - .vendor = "AMD", - .name = "Am29LV040B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -60R, others 2.7-3.6V*/ - }, - - { - .vendor = "AMD", - .name = "Am29LV081B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, - .model_id = AMD_AM29LV080B, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, /* datasheet specifies address as don't care */ - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -70R, others 2.7-3.6V */ - }, - - { - .vendor = "AMIC", - .name = "A25L05PT", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L05PT, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L05PU", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L05PU, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L10PT", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L10PT, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 1}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L10PU", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L10PU, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 1}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L20PT", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L20PT, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L20PU", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L20PU, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - /* The A25L40P{T,U} chips are distinguished by their - * erase block layouts, but without any distinction in RDID. - * This inexplicable quirk was verified by Rudolf Marek - * and discussed on the flashrom mailing list on 2010-07-12. - */ - { - .vendor = "AMIC", - .name = "A25L40PT", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L40PT, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L40PU", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L40PU, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 7}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L80P", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L80P, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PRE, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 15}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L16PT", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L16PT, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 31}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L16PU", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L16PU, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 31}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L512", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L512, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 16 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 1 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 64 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L010", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L010, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 32 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 2 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 128 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L020", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L020, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 64 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 4 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 256 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L040", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L040, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 128 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 8 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 512 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L080", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L080, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 256 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 16 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 1024 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L016", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L016, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 512 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 32 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 2048 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25L032", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25L032, - .total_size = 4096, - .page_size = 256, - /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 1024 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 64 } }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { { 64 * 1024, 64 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 4096 * 1024, 1 } }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 4096 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25LQ16", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25LQ16, - .total_size = 2048, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { { 4 * 1024, 512 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 32 } }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { { 64 * 1024, 32 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 2048 * 1024, 1 } }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 2048 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25LQ032/A25LQ32A", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25LQ032, - .total_size = 4096, - .page_size = 256, - /* A25LQ32A supports SFDP */ - /* OTP: 64B total; read 0x4B, 0x48; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 1024 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 64 * 1024, 64 } }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { { 64 * 1024, 64 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 4096 * 1024, 1 } }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 4096 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_amic_a25l032, /* bit5: T/B, bit6: prot size */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A25LQ64", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A25LQ032, - .total_size = 8192, - .page_size = 256, - /* supports SFDP */ - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - /* QPI enable 0x35, disable 0xF5 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 2048 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { { 32 * 1024, 256 } }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { { 64 * 1024, 128 } }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 8192 * 1024, 1 } }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 8192 * 1024, 1 } }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enhance (sic!) */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "AMIC", - .name = "A29002B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A29002B, - .total_size = 256, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMIC", - .name = "A29002T", - .bustype = BUS_PARALLEL, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A29002T, - .total_size = 256, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMIC", - .name = "A29040B", - .bustype = BUS_PARALLEL, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A29040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "AMIC", - .name = "A49LF040A", - .bustype = BUS_LPC, - .manufacture_id = AMIC_ID_NOPREFIX, - .model_id = AMIC_A49LF040A, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25DF021", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF021, - .total_size = 256, - .page_size = 256, - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, /* 2.3-3.6V & 2.7-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT25DF041A", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF041A, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, /* 2.3-3.6V & 2.7-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT25DF081", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF081, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1600, 2000}, /* Datasheet says range is 1.65-1.95 V */ - }, - - { - .vendor = "Atmel", - .name = "AT25DF081A", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF081A, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25DF161", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF161, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PROBE, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25DF321", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF321, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25DF321A", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF321A, - .total_size = 4096, - .page_size = 256, - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25DF641(A)", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF641, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25DL081", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DF081, - .total_size = 1024, - .page_size = 256, - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, /* Dual I/O (0xA2) supported */ - .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "Atmel", - .name = "AT25DL161", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DL161, - .total_size = 2048, - .page_size = 256, - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, /* Dual I/O (0xA2) supported */ - .read = spi_chip_read, /* Fast read (0x0B), dual I/O (0x3B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "Atmel", - .name = "AT25DQ161", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25DQ161, - .total_size = 2048, - .page_size = 256, - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df_sec, - .unlock = spi_disable_blockprotect_at2x_global_unprotect_sec, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25F512", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F512, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_at25f, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_62, - } - }, - .printlock = spi_prettyprint_status_register_at25f, - .unlock = spi_disable_blockprotect_at25f, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25F512A", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F512A, - .total_size = 64, - .page_size = 128, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_at25f, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_62, - } - }, - .printlock = spi_prettyprint_status_register_at25f512a, - /* FIXME: It is not correct to use this one, because the BP1 bit is N/A. */ - .unlock = spi_disable_blockprotect_at25f512a, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25F512B", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F512B, - .total_size = 64, - .page_size = 256, - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_62, - } - }, - .printlock = spi_prettyprint_status_register_at25f512b, - .unlock = spi_disable_blockprotect_at25f512b, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - /* The A suffix indicates 33MHz instead of 20MHz clock rate. - * All other properties seem to be the same.*/ - .name = "AT25F1024(A)", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F1024, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_at25f, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_62, - } - }, - .printlock = spi_prettyprint_status_register_at25f, - .unlock = spi_disable_blockprotect_at25f, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25F2048", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F2048, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_at25f, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_62, - } - }, - .printlock = spi_prettyprint_status_register_at25f, - .unlock = spi_disable_blockprotect_at25f, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25F4096", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25F4096, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_at25f, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_62, - } - }, - .printlock = spi_prettyprint_status_register_at25f4096, - /* "Bits 5-6 are 0s when device is not in an internal write cycle." Better leave them alone: */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25FS010", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25FS010, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25fs010, - .unlock = spi_disable_blockprotect_at25fs010, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT25FS040", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT25FS040, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25fs040, - .unlock = spi_disable_blockprotect_at25fs040, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT26DF041", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT26DF041, - .total_size = 512, - .page_size = 256, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 2048} }, - .block_erase = spi_block_erase_81, - }, { - .eraseblocks = { {2 * 1024, 256} }, - .block_erase = spi_block_erase_50, - }, { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - } - }, - .printlock = spi_prettyprint_status_register_plain, - /* Supports also an incompatible page write (of exactly 256 B) and an auto-erasing write. */ - .write = spi_chip_write_1, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, /* 3.0-3.6V for higher speed, 2.7-3.6V normal */ - }, - - { - .vendor = "Atmel", - .name = "AT26DF081A", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT26DF081A, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at26df081a, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT26DF161", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT26DF161, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at25df, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT26DF161A", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT26DF161A, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_at26df081a, - .unlock = spi_disable_blockprotect_at2x_global_unprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - /*The AT26DF321 has the same ID as the AT25DF321. */ - /*{ - .vendor = "Atmel", - .name = "AT26DF321", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT26DF321, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .printlock = spi_prettyprint_status_register_at26df081a, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - },*/ - - { - .vendor = "Atmel", - .name = "AT26F004", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT26F004, - .total_size = 512, - .page_size = 256, - .tested = {.probe = NT, .read = NT, .erase = NT, .write = BAD }, - .feature_bits = FEATURE_WRSR_WREN, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .write = NULL /* Incompatible Page write */, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT29C512", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT29C512, - .total_size = 64, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10000, /* 10mS, Enter=Exec */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT29C010A", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT29C010A, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = 10000, /* 10mS, Enter=Exec */ - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, /* FIXME */ - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT29C020", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT29C020, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10000, /* 10ms */ - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT29C040A", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT29C040A, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10000, /* 10 ms */ - .block_erasers = - { - { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT45CS1282", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45CS1282, - .total_size = 16896 /* No power of two sizes */, - .page_size = 1056 /* No power of two sizes */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77 (4 dummy bytes); write 0x9A (via buffer) */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1056, 1}, /* sector 0a: opcode 50h */ - {248 * 1056, 1}, /* sector 0b: opcode 7Ch */ - {256 * 1056, 63}, /* sectors 1 - 63: opcode 7Ch */ - }, - .block_erase = spi_erase_at45cs_sector, - } - }, - .printlock = spi_prettyprint_status_register_plain, - .gran = write_gran_1056bytes, - .write = spi_write_at45db, - .read = spi_read_at45db, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT45DB011D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB011D, - .total_size = 128 /* or 132, determined from status register */, - .page_size = 256 /* or 264, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 512} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 256, 512/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 256, 1}, - {120 * 256, 1}, - {128 * 256, 3}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT45DB021D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB021D, - .total_size = 256 /* or 264, determined from status register */, - .page_size = 256 /* or 264, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 1024} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 256, 1024/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 256, 1}, - {120 * 256, 1}, - {128 * 256, 7}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT45DB041D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB041D, - .total_size = 512 /* or 528, determined from status register */, - .page_size = 256 /* or 264, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 2048} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 256, 2048/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 256, 1}, - {248 * 256, 1}, - {256 * 256, 7}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT45DB081D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB081D, - .total_size = 1024 /* or 1056, determined from status register */, - .page_size = 256 /* or 264, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 4096} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 256, 4096/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 256, 1}, - {248 * 256, 1}, - {256 * 256, 15}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT45DB161D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB161D, - .total_size = 2048 /* or 2112, determined from status register */, - .page_size = 512 /* or 528, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 4096} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 512, 4096/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 512, 1}, - {248 * 512, 1}, - {256 * 512, 15}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT45DB321C", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB321C, - .total_size = 4224 /* No power of two sizes */, - .page_size = 528 /* No power of two sizes */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77 (4 dummy bytes); write 0x9A (via buffer) */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {528, 8192} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 528, 8192/8} }, - .block_erase = spi_erase_at45db_block, - }, /* Although the datasheets describes sectors (which can be write protected) - * there seems to be no erase functions for them. - { - .eraseblocks = { - {8 * 528, 1}, - {120 * 528, 1}, - {128 * 528, 63}, - }, - .block_erase = spi_erase_at45db_sector - }, */ { - .eraseblocks = { {4224 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .printlock = spi_prettyprint_status_register_at45db, /* Bit 0 is undefined, no lockdown */ - .gran = write_gran_528bytes, - .write = spi_write_at45db, - .read = spi_read_at45db_e8, /* 3 address and 4 dummy bytes */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT45DB321D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB321D, - .total_size = 4096 /* or 4224, determined from status register */, - .page_size = 512 /* or 528, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 8192} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 512, 8192/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 512, 1}, - {120 * 512, 1}, - {128 * 512, 63}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {4096 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, /* 2.5-3.6V & 2.7-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT45DB321E", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB321C, - .total_size = 4096 /* or 4224, determined from status register */, - .page_size = 512 /* or 528, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 8192} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 512, 8192/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 512, 1}, - {120 * 512, 1}, - {128 * 512, 63}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {4096 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, /* has a 2nd status register */ - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2500, 3600}, /* 2.3-3.6V & 2.5-3.6V models available */ - }, - - { - .vendor = "Atmel", - .name = "AT45DB642D", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT45DB642D, - .total_size = 8192 /* or 8448, determined from status register */, - .page_size = 1024 /* or 1056, determined from status register */, - /* does not support EWSR nor WREN and has no writable status register bits whatsoever */ - /* OTP: 128B total, 64B pre-programmed; read 0x77; write 0x9B */ - .feature_bits = FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_at45db, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {1024, 8192} }, - .block_erase = spi_erase_at45db_page, - }, { - .eraseblocks = { {8 * 1024, 8192/8} }, - .block_erase = spi_erase_at45db_block, - }, { - .eraseblocks = { - {8 * 1024, 1}, - {248 * 1024, 1}, - {256 * 1024, 31}, - }, - .block_erase = spi_erase_at45db_sector - }, { - .eraseblocks = { {8192 * 1024, 1} }, - .block_erase = spi_erase_at45db_chip, - } - }, - .unlock = spi_disable_blockprotect_at45db, /* Impossible if locked down or #WP is low */ - .printlock = spi_prettyprint_status_register_at45db, - /* granularity will be set by the probing function. */ - .write = spi_write_at45db, - .read = spi_read_at45db, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT49BV512", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49BV512, - .total_size = 64, - .page_size = 64, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT49F002(N)", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F002N, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {96 * 1024, 1}, - {128 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT49F002(N)T", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F002NT, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 1}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT49(H)F010", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F010, - .total_size = 128, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_at49f, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT49F020", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F020, - .total_size = 256, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - /* Chip features an optional permanent write protection - * of the first 8 kB. The erase function is the same as - * above, but 00000H to 01FFFH will not be erased. - * FIXME: add another eraser when partial erasers are - * supported. - */ - }, - .printlock = printlock_at49f, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT49F040", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F040, - .total_size = 512, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - /* Chip features an optional permanent write protection - * of the first 16 kB. The erase function is the same as - * above, but 00000H to 03FFFH will not be erased. - * FIXME: add another eraser when partial erasers are - * supported. - */ - }, - .printlock = printlock_at49f, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT49F080", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F080, - .total_size = 1024, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - /* Chip features an optional permanent write protection - * of the first 16 kB. The erase function is the same as - * above, but 00000H to 03FFFH will not be erased. - * FIXME: add another eraser when partial erasers are - * supported. - */ - }, - .printlock = printlock_at49f, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - /* 'top' version of AT49F080. equal in all aspects but the boot block address */ - .vendor = "Atmel", - .name = "AT49F080T", - .bustype = BUS_PARALLEL, - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49F080T, - .total_size = 1024, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - /* Chip features an optional permanent write protection - * of the first 16 kB. The erase function is the same as - * above, but FC000H to FFFFFH will not be erased. - * FIXME: add another eraser when partial erasers are - * supported. - */ - }, - .printlock = printlock_at49f, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Atmel", - .name = "AT49LH002", - .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49LH002, - .total_size = 256, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = NULL, /* TODO: Implement. */ - }, { - .eraseblocks = { - {64 * 1024, 4}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT49LH00B4", - .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49LH00B4, - .total_size = 512, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 2}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 7}, - }, - .block_erase = NULL, /* TODO: Implement. */ - }, { - .eraseblocks = { - {64 * 1024, 8}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Atmel", - .name = "AT49LH004", - .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ - .manufacture_id = ATMEL_ID, - .model_id = ATMEL_AT49LH004, - .total_size = 512, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, { - .eraseblocks = { - {64 * 1024, 8}, - }, - .block_erase = NULL, /* TODO: Implement. */ - }, - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Catalyst", - .name = "CAT28F512", - .bustype = BUS_PARALLEL, - .manufacture_id = CATALYST_ID, - .model_id = CATALYST_CAT28F512, - .total_size = 64, - .page_size = 0, /* unused */ - .feature_bits = 0, - .tested = {.probe = OK, .read = OK, .erase = BAD, .write = BAD }, - .probe = probe_jedec, /* FIXME! */ - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = NULL, /* TODO */ - }, - }, - .write = NULL, /* TODO */ - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Bright", - .name = "BM29F040", - .bustype = BUS_PARALLEL, - .manufacture_id = BRIGHT_ID, - .model_id = BRIGHT_BM29F040, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "ESMT", - .name = "F49B002UA", - .bustype = BUS_PARALLEL, - .manufacture_id = ESMT_ID, - .model_id = ESMT_F49B002UA, - .total_size = 256, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 1}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "ESMT", - .name = "F25L008A", - .bustype = BUS_SPI, - .manufacture_id = ESMT_ID, - .model_id = ESMT_F25L008A, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ESMT", - .name = "F25L32PA", - .bustype = BUS_SPI, - .manufacture_id = ESMT_ID, - .model_id = ESMT_F25L32PA, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_bpl, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B05", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B05, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B05T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B05, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B10", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 3}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B10T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {32 * 1024, 3}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B20", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 3} - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B20T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B40", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 7} - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B40T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B80", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 15} - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B80T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 15}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B16", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 31}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B16T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 31}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B32", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B32, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 63}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B32T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B32, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 63}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B64", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B64, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 2}, - {8 * 1024, 1}, - {16 * 1024, 1}, - {32 * 1024, 1}, - {64 * 1024, 127}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25B64T", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25B64, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 127}, - {32 * 1024, 1}, - {16 * 1024, 1}, - {8 * 1024, 1}, - {4 * 1024, 2}, - }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F05", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F05, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F10", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F20", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F40", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PROBE, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F80", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F16", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F32", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F32, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25F64", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25F64, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25Q40", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q40, - .total_size = 512, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25Q80(A)", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q80, - .total_size = 1024, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - /* Note: EN25D16 is an evil twin which shares the model ID - but has different write protection capabilities */ - .vendor = "Eon", - .name = "EN25Q16", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q16, - .total_size = 2048, - .page_size = 256, - /* OTP: D16 512B/Q16 128B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - /* not supported by Q16 version */ - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25Q32(A/B)", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q32, - .total_size = 4096, - .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25Q64", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q64, - .total_size = 8192, - .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25Q128", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25Q128, - .total_size = 16384, - .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - }, - - { - .vendor = "Eon", - .name = "EN25QH16", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25QH16, - .total_size = 2048, - .page_size = 256, - /* supports SFDP */ - /* OTP: 512B total; enter 0x3A */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 2048, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 2048, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25QH32", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25QH32, - .total_size = 4096, - .page_size = 256, - /* supports SFDP */ - /* OTP: 512B total; enter 0x3A */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 4096, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 4096, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25QH64", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25QH64, - .total_size = 8192, - .page_size = 256, - /* supports SFDP */ - /* OTP: 512B total; enter 0x3A */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 8192 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 8192 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25QH128", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25QH128, - .total_size = 16384, - .page_size = 256, - /* supports SFDP */ - /* OTP: 512B total; enter 0x3A */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN25S10", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S10, - .total_size = 128, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN25S20", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S20, - .total_size = 256, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN25S40", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S40, - .total_size = 512, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN25S80", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S80, - .total_size = 1024, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN25S16", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S16, - .total_size = 2048, - .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_en25s_wp, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN25S32", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S32, - .total_size = 4096, - .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4096 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4096 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_en25s_wp, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN25S64", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = EON_EN25S64, - .total_size = 8192, - .page_size = 256, - /* OTP: 512B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8192 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8192 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_en25s_wp, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1650, 1950}, - }, - - { - .vendor = "Eon", - .name = "EN29F010", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29F010, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {16 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Eon", - .name = "EN29F002(A)(N)B", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29F002B, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Eon", - .name = "EN29F002(A)(N)T", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29F002T, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Eon", - .name = "EN29LV640B", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29LV640B, - .total_size = 8192, - .page_size = 8192, - .feature_bits = FEATURE_ADDR_SHIFTED, - .tested = TEST_OK_PREW, - .probe = probe_en29lv640b, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127}, - }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_en29lv640b, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN29GL064(A)B", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29GL064B, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN29GL064(A)T", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29GL064T, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 127}, - {8 * 1024, 8}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN29GL064H/L", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29GL064HL, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Eon", - .name = "EN29GL128", - .bustype = BUS_PARALLEL, - .manufacture_id = EON_ID, - .model_id = EON_EN29GL128HL, - .total_size = 16384, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Fujitsu", - .name = "MBM29F004BC", - .bustype = BUS_PARALLEL, - .manufacture_id = FUJITSU_ID, - .model_id = FUJITSU_MBM29F004BC, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 7}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = NULL, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Fujitsu", - .name = "MBM29F004TC", - .bustype = BUS_PARALLEL, - .manufacture_id = FUJITSU_ID, - .model_id = FUJITSU_MBM29F004TC, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = NULL, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - /* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */ - .vendor = "Fujitsu", - .name = "MBM29F400BC", - .bustype = BUS_PARALLEL, - .manufacture_id = FUJITSU_ID, - .model_id = FUJITSU_MBM29F400BC, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 7}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ - }, - - { - .vendor = "Fujitsu", - .name = "MBM29F400TC", - .bustype = BUS_PARALLEL, - .manufacture_id = FUJITSU_ID, - .model_id = FUJITSU_MBM29F400TC, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -55, others 4.5-5.5V */ - }, - - { - .vendor = "Fujitsu", - .name = "MBM29LV160BE", - .bustype = BUS_PARALLEL, - .manufacture_id = FUJITSU_ID, - .model_id = FUJITSU_MBM29LV160BE, - .total_size = 2 * 1024, - .page_size = 0, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 31}, - }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, /* Supports a fast mode too */ - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -70, others 2.7-3.6V */ - }, - - { - .vendor = "Fujitsu", - .name = "MBM29LV160TE", - .bustype = BUS_PARALLEL, - .manufacture_id = FUJITSU_ID, - .model_id = FUJITSU_MBM29LV160TE, - .total_size = 2 * 1024, - .page_size = 0, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 31}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, /* Supports a fast mode too */ - .read = read_memmapped, - .voltage = {3000, 3600}, /* 3.0-3.6V for type -70, others 2.7-3.6V */ - }, - - { - .vendor = "GigaDevice", - .name = "GD25LQ32", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25LQ32, - .total_size = 4096, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q512", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q512, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q10", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q20(B)", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q40(B)", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q80(B)", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q80, - .total_size = 1024, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q16(B)", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q16, - .total_size = 2048, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (B version only) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q32(B)", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q32, - .total_size = 4096, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q64(B)", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q64, - .total_size = 8192, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25Q128B", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25Q128, - .total_size = 16384, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 512} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp4_srwd, - .unlock = spi_disable_blockprotect_bp4_srwd, /* TODO: 2nd status reg (read with 0x35) */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "GigaDevice", - .name = "GD25T80", - .bustype = BUS_SPI, - .manufacture_id = GIGADEVICE_ID, - .model_id = GIGADEVICE_GD25T80, - .total_size = 1024, - .page_size = 256, - /* OTP: 256B total; enter 0x3A */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Hyundai", - .name = "HY29F002T", - .bustype = BUS_PARALLEL, - .manufacture_id = HYUNDAI_ID, - .model_id = HYUNDAI_HY29F002T, - .total_size = 256, - .page_size = 256 * 1024, - .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -45, others 4.5-5.5V */ - }, - - { - .vendor = "Hyundai", - .name = "HY29F002B", - .bustype = BUS_PARALLEL, - .manufacture_id = HYUNDAI_ID, - .model_id = HYUNDAI_HY29F002B, - .total_size = 256, - .page_size = 256 * 1024, - .feature_bits = FEATURE_EITHER_RESET, /* Some revisions may need FEATURE_ADDR_2AA */ - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -45, others 4.5-5.5V */ - }, - - { - .vendor = "Hyundai", - .name = "HY29F040A", - .bustype = BUS_PARALLEL, - .manufacture_id = HYUNDAI_ID, - .model_id = HYUNDAI_HY29F040A, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Intel", - .name = "25F160S33B8", - .bustype = BUS_SPI, - .manufacture_id = INTEL_ID, - .model_id = INTEL_25F160S33B8, - .total_size = 2048, - .page_size = 256, - /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 8 so-called "parameter blocks" with - * opcode 0x40. Trying to access an address outside these 8 8kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 31} // inaccessible - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, - .unlock = spi_disable_blockprotect_bp2_ep_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* also fast read 0x0B */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Intel", - .name = "25F160S33T8", - .bustype = BUS_SPI, - .manufacture_id = INTEL_ID, - .model_id = INTEL_25F160S33T8, - .total_size = 2048, - .page_size = 256, - /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 8 so-called "parameter blocks" with - * opcode 0x40. Trying to access an address outside these 8 8kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {64 * 1024, 31}, // inaccessible - {8 * 1024, 8} - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, - .unlock = spi_disable_blockprotect_bp2_ep_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* also fast read 0x0B */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Intel", - .name = "25F320S33B8", - .bustype = BUS_SPI, - .manufacture_id = INTEL_ID, - .model_id = INTEL_25F320S33B8, - .total_size = 4096, - .page_size = 256, - /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 8 so-called "parameter blocks" with - * opcode 0x40. Trying to access an address outside these 8 8kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 63} // inaccessible - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, - .unlock = spi_disable_blockprotect_bp2_ep_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* also fast read 0x0B */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Intel", - .name = "25F320S33T8", - .bustype = BUS_SPI, - .manufacture_id = INTEL_ID, - .model_id = INTEL_25F320S33T8, - .total_size = 4096, - .page_size = 256, - /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 8 so-called "parameter blocks" with - * opcode 0x40. Trying to access an address outside these 8 8kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {64 * 1024, 63}, // inaccessible - {8 * 1024, 8} - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, - .unlock = spi_disable_blockprotect_bp2_ep_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* also fast read 0x0B */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Intel", - .name = "25F640S33B8", - .bustype = BUS_SPI, - .manufacture_id = INTEL_ID, - .model_id = INTEL_25F640S33B8, - .total_size = 8192, - .page_size = 256, - /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 8 so-called "parameter blocks" with - * opcode 0x40. Trying to access an address outside these 8 8kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127} // inaccessible - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, - .unlock = spi_disable_blockprotect_bp2_ep_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* also fast read 0x0B */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Intel", - .name = "25F640S33T8", - .bustype = BUS_SPI, - .manufacture_id = INTEL_ID, - .model_id = INTEL_25F640S33T8, - .total_size = 8192, - .page_size = 256, - /* OTP: 506B total (2x 8B, 30x 16B, 1x 10B); read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - /* This chip supports erasing of the 8 so-called "parameter blocks" with - * opcode 0x40. Trying to access an address outside these 8 8kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {64 * 1024, 127}, // inaccessible - {8 * 1024, 8} - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, - .unlock = spi_disable_blockprotect_bp2_ep_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* also fast read 0x0B */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Intel", - .name = "28F001BN/BX-B", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F001B, - .total_size = 128, - .page_size = 128 * 1024, /* 8k + 2x4k + 112k */ - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 1}, - {4 * 1024, 2}, - {112 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Intel", - .name = "28F001BN/BX-T", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F001T, - .total_size = 128, - .page_size = 128 * 1024, /* 112k + 2x4k + 8k */ - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {112 * 1024, 1}, - {4 * 1024, 2}, - {8 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Intel", - .name = "28F002BC/BL/BV/BX-T", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F002T, - .total_size = 256, - .page_size = 256 * 1024, - .tested = TEST_OK_PRE, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 1}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - }, - - { - .vendor = "Intel", - .name = "28F008S3/S5/SC", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F004S3, - .total_size = 512, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_82802ab, - }, - }, - .unlock = unlock_28f004s5, - .write = write_82802ab, - .read = read_memmapped, - }, - - { - .vendor = "Intel", - .name = "28F004B5/BE/BV/BX-B", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F004B, - .total_size = 512, - .page_size = 128 * 1024, /* maximal block size */ - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {96 * 1024, 1}, - {128 * 1024, 3}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - }, - - { - .vendor = "Intel", - .name = "28F004B5/BE/BV/BX-T", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F004T, - .total_size = 512, - .page_size = 128 * 1024, /* maximal block size */ - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 3}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - }, - - { - .vendor = "Intel", - .name = "28F400BV/BX/CE/CV-B", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F400B, - .total_size = 512, - .page_size = 128 * 1024, /* maximal block size */ - .feature_bits = FEATURE_ADDR_SHIFTED, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {96 * 1024, 1}, - {128 * 1024, 3}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - }, - - { - .vendor = "Intel", - .name = "28F400BV/BX/CE/CV-T", - .bustype = BUS_PARALLEL, - .manufacture_id = INTEL_ID, - .model_id = INTEL_28F400T, - .total_size = 512, - .page_size = 128 * 1024, /* maximal block size */ - .feature_bits = FEATURE_ADDR_SHIFTED, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 3}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, - }, - .write = write_82802ab, - .read = read_memmapped, - }, - - { - .vendor = "Intel", - .name = "82802AB", - .bustype = BUS_FWH, - .manufacture_id = INTEL_ID, - .model_id = INTEL_82802AB, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_82802ab, - }, - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Intel", - .name = "82802AC", - .bustype = BUS_FWH, - .manufacture_id = INTEL_ID, - .model_id = INTEL_82802AC, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine does not use probe_timing (82802ab.c) */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_82802ab, - }, - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "ISSI", - .name = "IS29GL064B", - .bustype = BUS_PARALLEL, - .manufacture_id = ISSI_ID, - .model_id = ISSI_PMC_IS29GL064B, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ISSI", - .name = "IS29GL064T", - .bustype = BUS_PARALLEL, - .manufacture_id = ISSI_ID, - .model_id = ISSI_PMC_IS29GL064T, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 127}, - {8 * 1024, 8}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ISSI", - .name = "IS29GL064H/L", - .bustype = BUS_PARALLEL, - .manufacture_id = ISSI_ID, - .model_id = ISSI_PMC_IS29GL064HL, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ISSI", - .name = "IS29GL128H/L", - .bustype = BUS_PARALLEL, - .manufacture_id = ISSI_ID, - .model_id = ISSI_PMC_IS29GL128HL, - .total_size = 16384, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX23L1654", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX23L1654, - .total_size = 2048, - .page_size = 256, - .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, /* MX23L1654 is a mask ROM, so it is read-only */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {3000, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX23L3254", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX23L3254, - .total_size = 4096, - .page_size = 256, - .tested = {.probe = OK, .read = OK, .erase = NA, .write = NA}, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, /* MX23L3254 is a mask ROM, so it is read-only */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {3000, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX23L6454", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX23L6454, - .total_size = 8192, - .page_size = 256, - .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, /* MX23L6454 is a mask ROM, so it is read-only */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {3000, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX23L12854", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX23L12854, - .total_size = 16384, - .page_size = 256, - .tested = {.probe = NT, .read = NT, .erase = NA, .write = NA}, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, /* MX23L12854 is a mask ROM, so it is read-only */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {3000, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L512(E)/MX25V512(C)", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L512, - .total_size = 64, - .page_size = 256, - /* MX25L512E supports SFDP */ - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported, MX25L512E supports dual I/O */ - .voltage = {2700, 3600}, /* 2.35-3.6V for MX25V512(C) */ - }, - - { - .vendor = "Macronix", - .name = "MX25L1005(C)/MX25L1006E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L1005, - .total_size = 128, - .page_size = 256, - /* MX25L1006E supports SFDP */ - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported, MX25L1006E supports dual I/O */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L2005(C)", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L2005, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L4005(A/C)", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L4005, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L8005/MX25V8005", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L8005, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, /* 2.35-3.6V for MX25V8005 */ - }, - - { - .vendor = "Macronix", - .name = "MX25L1605D/MX25L1608D/MX25L1673E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L1605, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: Continuously Program (CP) mode */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L1635D", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L1635D, - .total_size = 2048, - .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L1635E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L1635E, - .total_size = 2048, - .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L3205(A)", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L3205, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit6: error flag */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L3205D/MX25L3208D", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L3205, - .total_size = 4096, - .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6: CP mode */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L3206E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L3205, - .total_size = 4096, - .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L3273E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L3205, - .total_size = 4096, - .page_size = 256, - /* OTP: 64B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L3235D", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L3235D, - .total_size = 4096, - .page_size = 256, - /* OTP: 256B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L6405(D)", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L6405, - .total_size = 8192, - .page_size = 256, - /* MX25L6405D has 64B of OTP; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 has different meanings */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L6406E/MX25L6436E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L6405, - .total_size = 8192, - .page_size = 256, - /* OTP: 06E 64B/36E 512B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 for 36E is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L6445E/MX25L6473E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L6405, - .total_size = 8192, - .page_size = 256, - /* supports SFDP */ - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25L12805(D)", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25L12805, - .total_size = 16384, - .page_size = 256, - /* MX25L12805D has 64B of OTP; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* MX25L12805D: Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX25U1635E", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25U1635E, - .total_size = 2048, - .page_size = 256, - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - /* TODO: security register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1650, 2000}, - }, - - { - .vendor = "Macronix", - .name = "MX25U3235E/F", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25U3235E, - .total_size = 4096, - .page_size = 256, - /* F model supports SFDP */ - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - /* TODO: security register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1650, 2000}, - }, - - { - .vendor = "Macronix", - .name = "MX25U6435E/F", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25U6435E, - .total_size = 8192, - .page_size = 256, - /* F model supports SFDP */ - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - /* QPI enable 0x35, disable 0xF5 (0xFF et al. work too) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - /* TODO: security register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1650, 2000}, - }, - - { - .vendor = "Macronix", - .name = "MX25U12835F", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX25U12835E, - .total_size = 16384, - .page_size = 256, - /* OTP: 512B total; enter 0xB1, exit 0xC1 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 512} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - /* TODO: security register */ - .printlock = spi_prettyprint_status_register_bp3_srwd, /* bit6 is quad enable */ - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1650, 2000}, - }, - - { - .vendor = "Macronix", - .name = "MX29F001B", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F001B, - .total_size = 128, - .page_size = 32 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 1}, - {4 * 1024, 2}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29F001T", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F001T, - .total_size = 128, - .page_size = 32 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 1}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {4 * 1024, 2}, - {8 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29F002(N)B", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F002B, - .total_size = 256, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29F002(N)T", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F002T, - .total_size = 256, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29F022(N)B", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F022B, - .total_size = 256, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29F022(N)T", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F022T, - .total_size = 256, - .page_size = 0, /* unused */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29F040", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29F040, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL320EB", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL320EB, - .total_size = 4096, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 63}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL320ET", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL320ET, - .total_size = 4096, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 63}, - {8 * 1024, 8}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL320EH/L", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL320EHL, - .total_size = 4096, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL640EB", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL640EB, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL640ET", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL640ET, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 127}, - {8 * 1024, 8}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL640EH/L", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL640EHL, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29GL128F", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29GL128F, - .total_size = 16384, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Macronix", - .name = "MX29LV040", - .bustype = BUS_PARALLEL, - .manufacture_id = MACRONIX_ID, - .model_id = MACRONIX_MX29LV040, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P05-A", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P05A, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - /* The ST M25P05 is a bit of a problem. It has the same ID as the - * ST M25P05-A in RES mode, but supports only 128 byte writes instead - * of 256 byte writes. We rely heavily on the fact that probe_spi_res1 - * only is successful if RDID does not work. - */ - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P05", - .bustype = BUS_SPI, - .manufacture_id = 0, /* Not used. */ - .model_id = ST_M25P05_RES, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res1, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* 128 */ - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P10-A", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P10A, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PRE, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - /* The ST M25P10 has the same problem as the M25P05. */ - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P10", - .bustype = BUS_SPI, - .manufacture_id = 0, /* Not used. */ - .model_id = ST_M25P10_RES, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res1, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* 128 */ - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", /* Numonyx */ - .name = "M25P20", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P20-old", - .bustype = BUS_SPI, - .manufacture_id = 0, /* Not used. */ - .model_id = ST_M25P20_RES, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_res1, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", /* Numonyx */ - .name = "M25P40", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P40-old", - .bustype = BUS_SPI, - .manufacture_id = 0, /* Not used. */ - .model_id = ST_M25P40_RES, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res1, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P80", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P16", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P32", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P32, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P64", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P64, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25P128", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25P128, - .total_size = 16384, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PE10", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PE10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PE20", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PE20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PE40", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PE40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PE80", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PE80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PE16", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PE16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PX80", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PX80, - .total_size = 1024, - .page_size = 256, - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { { 4 * 1024, 256 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PX16", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PX16, - .total_size = 2048, - .page_size = 256, - /* OTP: 64B total; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 512 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2300, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PX32", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PX32, - .total_size = 4096, - .page_size = 256, - /* OTP: 64B total; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PRE, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 1024 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M25PX64", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M25PX64, - .total_size = 8192, - .page_size = 256, - /* OTP: 64B total; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { { 4 * 1024, 2048 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* bit5: T/B */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M45PE10", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M45PE10, - .total_size = 128, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256, 512} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M45PE20", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M45PE20, - .total_size = 256, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256, 1024} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M45PE40", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M45PE40, - .total_size = 512, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256, 2048} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M45PE80", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M45PE80, - .total_size = 1024, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256, 4096} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "M45PE16", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_M45PE16, - .total_size = 2048, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256, 8192} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, /* Page write (similar to PP but allows 0->1 changes) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q016", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q016__1E, - .total_size = 2048, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1700, 2000}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q032..1E", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q032__1E, - .total_size = 4096, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1700, 2000}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q032..3E", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q032__3E, - .total_size = 4096, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q064..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */ - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q064__1E, - .total_size = 8192, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1700, 2000}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q064..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */ - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q064__3E, - .total_size = 8192, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q128..1E", /* ..1E = 1.8V, uniform 64KB/4KB blocks/sectors */ - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q128__1E, - .total_size = 16384, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 4096 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {1700, 2000}, - }, - - { - .vendor = "Micron/Numonyx/ST", - .name = "N25Q128..3E", /* ..3E = 3V, uniform 64KB/4KB blocks/sectors */ - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = ST_N25Q128__3E, - .total_size = 16384, - .page_size = 256, - /* supports SFDP */ - /* OTP: 64B total; read 0x4B, write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 4096 } }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_n25q, /* TODO: config, lock, flag regs */ - .unlock = spi_disable_blockprotect_n25q, /* TODO: per 64kB sector lock registers */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29C51000B", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29C51000B, - .total_size = 64, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29C51000T", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29C51000T, - .total_size = 64, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29C51400B", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29C51400B, - .total_size = 512, - .page_size = 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {1024, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29C51400T", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29C51400T, - .total_size = 512, - .page_size = 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {1024, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29LC51000", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29LC51000, - .total_size = 64, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29LC51001", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29LC51001, - .total_size = 128, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 256} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "MoselVitelic", - .name = "V29LC51002", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = MVC_V29LC51002, - .total_size = 256, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {512, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Nantronics", - .name = "N25S10", - .bustype = BUS_SPI, - .manufacture_id = NANTRONICS_ID_NOPREFIX, - .model_id = NANTRONICS_N25S10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Nantronics", - .name = "N25S20", - .bustype = BUS_SPI, - .manufacture_id = NANTRONICS_ID_NOPREFIX, - .model_id = NANTRONICS_N25S20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Nantronics", - .name = "N25S40", - .bustype = BUS_SPI, - .manufacture_id = NANTRONICS_ID_NOPREFIX, - .model_id = NANTRONICS_N25S40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Nantronics", - .name = "N25S80", - .bustype = BUS_SPI, - .manufacture_id = NANTRONICS_ID_NOPREFIX, - .model_id = NANTRONICS_N25S80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Nantronics", - .name = "N25S16", - .bustype = BUS_SPI, - .manufacture_id = NANTRONICS_ID_NOPREFIX, - .model_id = NANTRONICS_N25S16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2048 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O read (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LD256C", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LD256C, - .total_size = 32, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 8} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 8} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 1} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {32 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {32 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2700, 3600}, - }, - { - .vendor = "PMC", - .name = "Pm25LD512(C)", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LD512, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2300, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LD010(C)", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LD010, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD010 */ - }, - - { - .vendor = "PMC", - .name = "Pm25LD020(C)", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LD020, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* FIXME: C version supports "Safe Guard" */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD020 */ - }, - - { - .vendor = "PMC", - .name = "Pm25LD040(C)", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV040, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B), dual I/O supported */ - .voltage = {2700, 3600}, /* 2.3-3.6V for Pm25LD040 */ - }, - -{ - .vendor = "PMC", - .name = "Pm25LV512(A)", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM25LV512, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, /* The continuation code is transferred as the 3rd byte m( */ - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LV010", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM25LV010, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_res2, /* The continuation code is transferred as the 3rd byte m( */ - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LV010A", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV010, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LV020", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV020, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LV040", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV040, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LV080B", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV080B, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm25LV016B", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = PMC_PM25LV016B, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm29F002T", - .bustype = BUS_PARALLEL, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM29F002T, - .total_size = 256, - .page_size = 8 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 1}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "PMC", - .name = "Pm29F002B", - .bustype = BUS_PARALLEL, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM29F002B, - .total_size = 256, - .page_size = 8 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {96 * 1024, 1}, - {128 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "PMC", - .name = "Pm39LV010", - .bustype = BUS_PARALLEL, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM39F010, /* Pm39LV010 and Pm39F010 have identical IDs but different voltage */ - .total_size = 128, - .page_size = 4096, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm39LV020", - .bustype = BUS_PARALLEL, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM39LV020, - .total_size = 256, - .page_size = 4096, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm39LV040", - .bustype = BUS_PARALLEL, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM39LV040, - .total_size = 512, - .page_size = 4096, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm39LV512", - .bustype = BUS_PARALLEL, - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM39LV512, - .total_size = 64, - .page_size = 4096, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm49FL002", - .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM49FL002, - .total_size = 256, - .page_size = 16 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .unlock = unlock_regspace2_uniform_32k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "PMC", - .name = "Pm49FL004", - .bustype = BUS_LPC | BUS_FWH, /* A/A Mux */ - .manufacture_id = PMC_ID_NOPREFIX, - .model_id = PMC_PM49FL004, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* routine is wrapper to probe_jedec (pm49fl00x.c) */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW106", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW106, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {2 * 1024, 64} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp1_srwd, /* FIXME: Add ERSER error flag. */ - .unlock = spi_disable_blockprotect_bp1_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW406A", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW406A, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FU406B", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FU406B, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2300, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW203A", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW203A, - .total_size = 256, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {256, 1024} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW403A", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW403A, - .total_size = 512, - .page_size = 256, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256, 2 * 1024} }, - .block_erase = spi_block_erase_db, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_default_welwip, - .unlock = NULL, /* #WP pin write-protects lower 64kB. */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW418A", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW418A, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* some quad-read supported ("HD_READ mode") */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW806", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW806, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sanyo", - .name = "LE25FW808", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = SANYO_LE25FW808, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {8 * 1024, 128} }, - .block_erase = spi_block_erase_d7, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* some quad-read supported ("HD_READ mode") */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sharp", - .name = "LH28F008BJT-BTLZ1", - .bustype = BUS_PARALLEL, - .manufacture_id = SHARP_ID, - .model_id = SHARP_LH28F008BJ__PB, - .total_size = 1024, - .page_size = 64 * 1024, - .tested = TEST_OK_PREW, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 15} - }, - .block_erase = erase_block_82802ab, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_sector_49lfxxxc, - } - }, - .unlock = unlock_lh28f008bjt, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Sharp", - .name = "LHF00L04", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = SHARP_ID, - .model_id = SHARP_LHF00L04, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 15}, - {8 * 1024, 8} - }, - .block_erase = erase_block_82802ab, - }, { - .eraseblocks = { - {1024 * 1024, 1} - }, - .block_erase = NULL, /* 30 D0, only in A/A mux mode */ - }, - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL004A", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL004A, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL008A", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL008A, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PRE, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL016A", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL016A, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL032A/P", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL032A, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL064A/P", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL064A, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL204K", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL204, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL208K", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL208, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL116K/S25FL216K", /* FIXME: separate them */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL216, - .total_size = 2048, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 (S25FL116K only) */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 2048 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 2048 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and dual I/O (0x3B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL132K", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL132K, - .total_size = 4096, - .page_size = 256, - /* OTP: 768B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 4096 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 4096 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* TODO: improve */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL164K", - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL164K, - .total_size = 8192, - .page_size = 256, - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 8192 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 8192 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, /* TODO: improve */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* #WP pin write-protects SRWP bit. */ - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL128P......0", /* uniform 64 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp3_srwd, - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL128P......1", /* uniform 256kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_srwd, - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL128S......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 256, - /* supports 4B addressing */ - /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - /* This chip supports erasing of the 32 so-called "parameter sectors" with - * opcode 0x20. Trying to access an address outside these 4kB blocks does - * have no effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {4 * 1024, 32}, - {64 * 1024, 254} // inaccessible - }, - .block_erase = spi_block_erase_20, - }, { */ - .eraseblocks = { { 64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL128S......1", /* uniform 256 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 512, - /* supports 4B addressing */ - /* OTP: 1024B total, 32B reserved; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: SR2 and many others */ - .unlock = spi_disable_blockprotect_bp2_srwd, /* TODO: various other locks */ - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL129P......0", /* hybrid: 32 (top or bottom) 4 kB sub-sectors + 64 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 256, - /* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - /* FIXME: This chip supports erasing of the 32 so-called "parameter sectors" with - * opcode 0x20. Trying to access an address outside these 4kB blocks does have no - * effect on the memory contents, but sets a flag in the SR. - .eraseblocks = { - {4 * 1024, 32}, - {64 * 1024, 254} // inaccessible - }, - .block_erase = spi_block_erase_20, - }, { */ - /* FIXME: Additionally it also supports erase opcode 40h for the respective 2*4 kB pairs - .eraseblocks = { - {8 * 1024, 16}, - {64 * 1024, 254} // inaccessible - }, - .block_erase = spi_block_erase_40, - }, { */ - .eraseblocks = { { 64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Spansion", - .name = "S25FL129P......1", /* uniform 256 kB sectors */ - .bustype = BUS_SPI, - .manufacture_id = SPANSION_ID, - .model_id = SPANSION_S25FL128, - .total_size = 16384, - .page_size = 512, - /* OTP: 506B total, 16B reserved; read 0x4B; write 0x42 */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = { - { - .eraseblocks = { {256 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { { 16384 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_bp2_ep_srwd, /* TODO: Configuration register */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25LF020A", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF020_REMS, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rems, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25LF040A", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF040_REMS, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25LF080(A)", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF080_REMS, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_UNTESTED, - .probe = probe_spi_res2, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF512(A)", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF512_REMS, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rems, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_d8, /* Supported by SST25VF512A only */ - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = spi_block_erase_c7, /* Supported by SST25VF512A only */ - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, /* Fast read (0x0B) supported by SST25VF512A only */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF010(A)", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF010_REMS, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rems, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_d8, /* Supported by SST25VF010A only */ - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, /* Supported by SST25VF010A only */ - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, /* Fast read (0x0B) supported by SST25VF010A only */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF020", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF020_REMS, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_UNTESTED, - .probe = probe_spi_rems, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, /* only */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF020B", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF020B, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: No BP2 & 3 and 2nd SR */ - .unlock = spi_disable_blockprotect, /* FIXME: 2nd SR */ - .write = spi_aai_write, /* AAI supported (0xAD) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF040", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF040_REMS, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PR, - .probe = probe_spi_rems, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_1, /* AAI supported, but opcode is 0xAF */ - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF040B", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF040B, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25vf040b, - .unlock = spi_disable_blockprotect, - .write = spi_aai_write, /* AAI supported (0xAD) */ - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF040B.REMS", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF040B_REMS, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rems, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25vf040b, - .unlock = spi_disable_blockprotect, - .write = spi_aai_write, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF080B", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF080B, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_aai_write, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF016B", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF016B, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25vf016, - .unlock = spi_disable_blockprotect, - .write = spi_aai_write, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF032B", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF032B, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_aai_write, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25VF064C", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25VF064C, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EWSR, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* TODO: check */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST25WF512", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25WF512, - .total_size = 64, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 2} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {1024 * 64, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 64, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_aai_write, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "SST", - .name = "SST25WF010", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25WF010, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 4} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {1024 * 128, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 128, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_aai_write, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "SST", - .name = "SST25WF020", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25WF020, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 256, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 256, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_aai_write, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "SST", - .name = "SST25WF040", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25WF040, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 512, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 512, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* FIXME: does not have a BP3 */ - .unlock = spi_disable_blockprotect_bp2_srwd, - .write = spi_aai_write, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "SST", - .name = "SST25WF080", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = SST_SST25WF080, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_EITHER, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - }, - }, - .printlock = spi_prettyprint_status_register_sst25, /* *does* have a BP3 but it is useless */ - .unlock = spi_disable_blockprotect_bp3_srwd, - .write = spi_aai_write, - .read = spi_chip_read, /* Fast read (0x0B) supported */ - .voltage = {1650, 1950}, - }, - - { - .vendor = "SST", - .name = "SST28SF040A", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST28SF040, - .total_size = 512, - .page_size = 256, - .feature_bits = 0, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst28sf040.c) */ - .block_erasers = - { - { - .eraseblocks = { {128, 4096} }, - .block_erase = erase_sector_28sf040, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_28sf040, - } - }, - .unlock = unprotect_28sf040, - .write = write_28sf040, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST29EE010", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST29EE010, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST29LE010", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST29LE010, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST29EE020A", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST29EE020A, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST29LE020", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST29LE020, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST39SF512", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39SF512, - .total_size = 64, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST39SF010A", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39SF010, - .total_size = 128, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST39SF020A", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39SF020, - .total_size = 256, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST39SF040", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39SF040, - .total_size = 512, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SST", - .name = "SST39VF512", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39VF512, - .total_size = 64, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST39VF010", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39VF010, - .total_size = 128, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST39VF020", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39VF020, - .total_size = 256, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST39VF040", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39VF040, - .total_size = 512, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST39VF080", - .bustype = BUS_PARALLEL, - .manufacture_id = SST_ID, - .model_id = SST_SST39VF080, - .total_size = 1024, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF002A/B", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = SST_ID, - .model_id = SST_SST49LF002A, - .total_size = 256, - .page_size = 16 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ - } - }, - .printlock = printlock_sst_fwhub, - .unlock = unlock_sst_fwhub, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF003A/B", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = SST_ID, - .model_id = SST_SST49LF003A, - .total_size = 384, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 96} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 6} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {384 * 1024, 1} }, - .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ - } - }, - .printlock = printlock_sst_fwhub, - .unlock = unlock_sst_fwhub, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - /* Contrary to the data sheet, TBL# on the SST49LF004B affects the top 128kB (instead of 64kB) - * and is only honored for 64k block erase, but not 4k sector erase. - */ - .vendor = "SST", - .name = "SST49LF004A/B", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = SST_ID, - .model_id = SST_SST49LF004A, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ - }, - }, - .printlock = printlock_sst_fwhub, - .unlock = unlock_sst_fwhub, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF004C", - .bustype = BUS_FWH, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF004C, - .total_size = 512, - .page_size = 4 * 1024, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_49lfxxxc, - }, { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_1, - .unlock = unlock_regspace2_block_eraser_1, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF008A", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = SST_ID, - .model_id = SST_SST49LF008A, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = NULL, /* AA 55 80 AA 55 10, only in A/A mux mode */ - } - }, - .printlock = printlock_sst_fwhub, - .unlock = unlock_sst_fwhub, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF008C", - .bustype = BUS_FWH, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF008C, - .total_size = 1024, - .page_size = 4 * 1024, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = erase_sector_49lfxxxc, - }, { - .eraseblocks = { - {64 * 1024, 15}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_1, - .unlock = unlock_regspace2_block_eraser_1, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF016C", - .bustype = BUS_FWH, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF016C, - .total_size = 2048, - .page_size = 4 * 1024, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = erase_sector_49lfxxxc, - }, { - .eraseblocks = { - {64 * 1024, 31}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_1, - .unlock = unlock_regspace2_block_eraser_1, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF020", - .bustype = BUS_LPC, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF020, - .total_size = 256, - .page_size = 16 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = NULL, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF020A", - .bustype = BUS_LPC, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF020A, - .total_size = 256, - .page_size = 4 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PRE, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = NULL, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF040", - .bustype = BUS_LPC, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF040, - .total_size = 512, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 1, /* 150 ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = NULL, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF040B", - .bustype = BUS_LPC, /* A/A Mux */ - .manufacture_id = SST_ID, - .model_id = SST_SST49LF040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET | FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = 1, /* 150ns */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = NULL, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF080A", - .bustype = BUS_LPC, /* A/A Mux */ - .manufacture_id = SST_ID, - .model_id = SST_SST49LF080A, - .total_size = 1024, - .page_size = 4096, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = NULL, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SST", - .name = "SST49LF160C", - .bustype = BUS_LPC, - .manufacture_id = SST_ID, - .model_id = SST_SST49LF160C, - .total_size = 2048, - .page_size = 4 * 1024, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (sst49lfxxxc.c) */ - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = erase_sector_49lfxxxc, - }, { - .eraseblocks = { - {64 * 1024, 31}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_1, - .unlock = unlock_regspace2_block_eraser_1, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "ST", - .name = "M29F002B", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29F002B, - .total_size = 256, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -X, others 4.5-5.5V */ - }, - - { - .vendor = "ST", - .name = "M29F002T/NT", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29F002T, - .total_size = 256, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_AAA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4750, 5250}, /* 4.75-5.25V for type -X, others 4.5-5.5V */ - }, - - { - .vendor = "ST", - .name = "M29F040B", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29F040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* datasheet specifies no timing */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - /* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */ - .vendor = "ST", - .name = "M29F400BB", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29F400BB, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 7}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - { - /* FIXME: this has WORD/BYTE sequences; 2AA for word, 555 for byte */ - .vendor = "ST", - .name = "M29F400BT", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29F400BT, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_SHIFTED | FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, // FIXME: check datasheet. Using the 10 us from probe_m29f400bt - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 7}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "ST", - .name = "M29W010B", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29W010B, - .total_size = 128, - .page_size = 16 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {16 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ST", - .name = "M29W040B", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29W040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ST", - .name = "M29W512B", - .bustype = BUS_PARALLEL, - .manufacture_id = ST_ID, - .model_id = ST_M29W512B, - .total_size = 64, - .page_size = 64 * 1024, - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "ST", - .name = "M50FLW040A", - .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FLW040A, - .total_size = 512, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 16}, /* sector */ - {64 * 1024, 5}, /* block */ - {4 * 1024, 16}, /* sector */ - {4 * 1024, 16}, /* sector */ - }, - .block_erase = erase_sector_stm50, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_82802ab, - } - }, - .write = write_82802ab, - .unlock = unlock_regspace2_uniform_64k, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FLW040B", - .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FLW040B, - .total_size = 512, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 16}, /* sector */ - {4 * 1024, 16}, /* sector */ - {64 * 1024, 5}, /* block */ - {4 * 1024, 16}, /* sector */ - }, - .block_erase = erase_sector_stm50, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_82802ab, - } - }, - .write = write_82802ab, - .unlock = unlock_regspace2_uniform_64k, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FLW080A", - .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FLW080A, - .total_size = 1024, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 16}, /* sector */ - {64 * 1024, 13}, /* block */ - {4 * 1024, 16}, /* sector */ - {4 * 1024, 16}, /* sector */ - }, - .block_erase = erase_sector_stm50, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FLW080B", - .bustype = BUS_FWH | BUS_LPC, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FLW080B, - .total_size = 1024, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_FIXME, - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 16}, /* sector */ - {4 * 1024, 16}, /* sector */ - {64 * 1024, 13}, /* block */ - {4 * 1024, 16}, /* sector */ - }, - .block_erase = erase_sector_stm50, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FW002", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FW002, - .total_size = 256, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - }, { - .eraseblocks = { {256 * 1024, 1}, }, - .block_erase = NULL, /* Only in A/A mux mode */ - } - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FW016", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FW016, - .total_size = 2048, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = erase_block_82802ab, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FW040", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FW040, - .total_size = 512, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_block_82802ab, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50FW080", - .bustype = BUS_FWH, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50FW080, - .total_size = 1024, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_OK_PR, - .probe = probe_82802ab, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (82802ab.c) */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_82802ab, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50LPW080", - .bustype = BUS_LPC, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50LPW080, - .total_size = 1024, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_block_82802ab, - } - }, - .unlock = unlock_regspace2_uniform_64k, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "ST", - .name = "M50LPW116", - .bustype = BUS_LPC, /* A/A Mux */ - .manufacture_id = ST_ID, - .model_id = ST_M50LPW116, - .total_size = 2048, - .page_size = 0, - .feature_bits = FEATURE_REGISTERMAP, - .tested = TEST_UNTESTED, - .probe = probe_82802ab, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {4 * 1024, 16}, - {64 * 1024, 30}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_block_82802ab, - } - }, - .printlock = printlock_regspace2_block_eraser_0, - .unlock = unlock_regspace2_block_eraser_0, - .write = write_82802ab, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program & erase */ - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{F,S,V}29C51001B", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C51001B, - .total_size = 128, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {512, 256} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{F,S,V}29C51001T", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C51001T, - .total_size = 128, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {512, 256} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{F,S,V}29C51002B", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C51002B, - .total_size = 256, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {512, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{F,S,V}29C51002T", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C51002T, - .total_size = 256, - .page_size = 512, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {512, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{F,S,V}29C51004B", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C51004B, - .total_size = 512, - .page_size = 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {1024, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{F,S,V}29C51004T", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C51004T, - .total_size = 512, - .page_size = 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {1024, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{S,V}29C31004B", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C31004B, - .total_size = 512, - .page_size = 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {1024, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "SyncMOS/MoselVitelic", - .name = "{S,V}29C31004T", - .bustype = BUS_PARALLEL, - .manufacture_id = SYNCMOS_MVC_ID, - .model_id = SM_MVC_29C31004T, - .total_size = 512, - .page_size = 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { {1024, 512} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "TI", - .name = "TMS29F002RB", - .bustype = BUS_PARALLEL, - .manufacture_id = TI_OLD_ID, - .model_id = TI_TMS29F002RB, - .total_size = 256, - .page_size = 16384, /* Non-uniform sectors */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {16 * 1024, 1}, - {8 * 1024, 2}, - {32 * 1024, 1}, - {64 * 1024, 3}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "TI", - .name = "TMS29F002RT", - .bustype = BUS_PARALLEL, - .manufacture_id = TI_OLD_ID, - .model_id = TI_TMS29F002RT, - .total_size = 256, - .page_size = 16384, /* Non-uniform sectors */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = TIMING_ZERO, /* Datasheet has no timing info specified */ - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Winbond", - .name = "W25Q40.V", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q40_V, - .total_size = 512, - .page_size = 256, - /* supports SFDP */ - /* OTP: 756B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PR, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, /* Multi I/O supported */ - .read = spi_chip_read, /* Fast read (0x0B) and multi I/O supported */ - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25Q80.V", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q80_V, - .total_size = 1024, - .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25Q16.V", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q16_V, - .total_size = 2048, - .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25Q32.V", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q32_V, - .total_size = 4096, - .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25Q64.V", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q64_V, - .total_size = 8192, - .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25Q128.V", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q128_V, - .total_size = 16384, - .page_size = 256, - /* supports SFDP */ - /* OTP: 1024B total, 256B reserved; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 4096} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 512} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 256} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25Q20.W", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q20_W, - .total_size = 256, - .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 8} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ - }, - - { - .vendor = "Winbond", - .name = "W25Q40.W", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q40_W, - .total_size = 512, - .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 16} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ - }, - - { - .vendor = "Winbond", - .name = "W25Q80.W", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q80_W, - .total_size = 1024, - .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 32} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {1 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ - }, - - { - .vendor = "Winbond", - .name = "W25Q16.W", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q16_W, - .total_size = 2048, - .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_UNTESTED, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ - }, - - { - .vendor = "Winbond", - .name = "W25Q32.W", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q32_W, - .total_size = 4096, - .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ - }, - - { - .vendor = "Winbond", - .name = "W25Q64.W", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25Q64_W, - .total_size = 8192, - .page_size = 256, - /* OTP: 256B total; read 0x48; write 0x42, erase 0x44, read ID 0x4B */ - /* QPI enable 0x38, disable 0xFF */ - .feature_bits = FEATURE_WRSR_WREN | FEATURE_OTP | FEATURE_QPI, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {1700, 1950}, /* Fast read (0x0B) and multi I/O supported */ - }, - - { - .vendor = "Winbond", - .name = "W25X10", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X10, - .total_size = 128, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 2} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25X20", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X20, - .total_size = 256, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25X40", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X40, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25X80", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X80, - .total_size = 1024, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 256} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25X16", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X16, - .total_size = 2048, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 512} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 64} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 32} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {2 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25X32", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X32, - .total_size = 4096, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 1024} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 128} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W25X64", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = WINBOND_NEX_W25X64, - .total_size = 8192, - .page_size = 256, - .feature_bits = FEATURE_WRSR_WREN, - .tested = TEST_OK_PROBE, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 2048} }, - .block_erase = spi_block_erase_20, - }, { - .eraseblocks = { {32 * 1024, 256} }, - .block_erase = spi_block_erase_52, - }, { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = spi_block_erase_d8, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_60, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = spi_block_erase_c7, - } - }, - .printlock = spi_prettyprint_status_register_plain, /* TODO: improve */ - .unlock = spi_disable_blockprotect, - .write = spi_chip_write_256, - .read = spi_chip_read, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29C010(M)/W29C011A/W29EE011/W29EE012-old", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W29C010, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PREW, - .probe = probe_w29ee011, - .probe_timing = TIMING_IGNORED, /* routine doesn't use probe_timing (w29ee011.c) */ - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - }, - - {/* W29EE011, W29EE012, W29C010M, W29C011A do not support probe_jedec according to the datasheet, but it works for newer(?) steppings. */ - .vendor = "Winbond", - .name = "W29C010(M)/W29C011A/W29EE011/W29EE012", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W29C010, - .total_size = 128, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, /* used datasheet for the W29C011A */ - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - }, - - { - .vendor = "Winbond", - .name = "W29C020(C)/W29C022", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W29C020, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Winbond", - .name = "W29C040/P", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W29C040, - .total_size = 512, - .page_size = 256, - .feature_bits = FEATURE_LONG_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Winbond", - .name = "W29GL032CB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL032CB, - .total_size = 4096, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 63}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29GL032CT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL032CT, - .total_size = 4096, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 63}, - {8 * 1024, 8}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29GL032CH/L", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL032CHL, - .total_size = 4096, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 64} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {4 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29GL064CB", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL064CB, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {8 * 1024, 8}, - {64 * 1024, 127}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29GL064CT", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL064CT, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 127}, - {8 * 1024, 8}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29GL064CH/L", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL064CHL, - .total_size = 8192, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {8 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W29GL128C", - .bustype = BUS_PARALLEL, - .manufacture_id = AMD_ID, /* WTF: "Industry Standard compatible Manufacturer ID code of 01h" */ - .model_id = WINBOND_W29GL128CHL, - .total_size = 16384, - .page_size = 128 * 1024, /* actual page size is 16 */ - .feature_bits = FEATURE_ADDR_2AA | FEATURE_SHORT_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec_29gl, - .probe_timing = TIMING_ZERO, - .block_erasers = - { - { - .eraseblocks = { {128 * 1024, 128} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {16 * 1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - }, - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {2700, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39F010", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39F010, - .total_size = 128, - .page_size = 4 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39f010, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Winbond", - .name = "W39L010", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39L010, - .total_size = 128, - .page_size = 4 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 32} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {128 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39l010, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39L020", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39L020, - .total_size = 256, - .page_size = 4 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 64} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {64 * 1024, 4} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39l020, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39L040", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39L040, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39l040, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39V040A", - .bustype = BUS_LPC, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V040A, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v040a, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39V040B", - .bustype = BUS_LPC, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v040b, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39V040C", - .bustype = BUS_LPC, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V040C, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v040c, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39V040FA", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V040FA, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {4 * 1024, 128} }, - .block_erase = erase_block_jedec, - }, { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v040fa, - .unlock = unlock_regspace2_uniform_64k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39V040FB", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V040B, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v040fb, - .unlock = unlock_regspace2_uniform_64k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program */ - }, - - { - .vendor = "Winbond", - .name = "W39V040FC", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V040C, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v040fc, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program */ - }, - - { - .vendor = "Winbond", - .name = "W39V080A", - .bustype = BUS_LPC, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V080A, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v080a, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W49F002U/N", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W49F002U, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { - {128 * 1024, 1}, - {96 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Winbond", - .name = "W49F020", - .bustype = BUS_PARALLEL, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W49F020, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PROBE, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {4500, 5500}, - }, - - { - .vendor = "Winbond", - .name = "W49V002A", - .bustype = BUS_LPC, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W49V002A, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W49V002FA", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W49V002FA, - .total_size = 256, - .page_size = 128, - .feature_bits = FEATURE_EITHER_RESET, - .tested = TEST_OK_PREW, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { - {64 * 1024, 3}, - {32 * 1024, 1}, - {8 * 1024, 2}, - {16 * 1024, 1}, - }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {256 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, - }, - - { - .vendor = "Winbond", - .name = "W39V080FA", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V080FA, - .total_size = 1024, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_OK_PR, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 16} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {1024 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v080fa, - .unlock = unlock_regspace2_uniform_64k, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program */ - }, - - { - .vendor = "Winbond", - .name = "W39V080FA (dual mode)", - .bustype = BUS_FWH, - .manufacture_id = WINBOND_ID, - .model_id = WINBOND_W39V080FA_DM, - .total_size = 512, - .page_size = 64 * 1024, - .feature_bits = FEATURE_REGISTERMAP | FEATURE_EITHER_RESET, - .tested = TEST_UNTESTED, - .probe = probe_jedec, - .probe_timing = 10, - .block_erasers = - { - { - .eraseblocks = { {64 * 1024, 8} }, - .block_erase = erase_sector_jedec, - }, { - .eraseblocks = { {512 * 1024, 1} }, - .block_erase = erase_chip_block_jedec, - } - }, - .printlock = printlock_w39v080fa_dual, - .write = write_jedec_1, - .read = read_memmapped, - .voltage = {3000, 3600}, /* Also has 12V fast program */ - }, - - { - .vendor = "Unknown", - .name = "SFDP-capable chip", - .bustype = BUS_SPI, - .manufacture_id = GENERIC_MANUF_ID, - .model_id = SFDP_DEVICE_ID, - /* We present our own "report this" text hence we do not - * want the default "This flash part has status UNTESTED..." - * text to be printed. */ - .tested = TEST_OK_PREW, - .probe = probe_spi_sfdp, - .unlock = spi_disable_blockprotect, /* is this safe? */ - .read = spi_chip_read, - /* FIXME: some vendor extensions define this */ - .voltage = {0}, - /* Everything below will be set by the probing function. */ - .write = NULL, - .total_size = 0, - .page_size = 0, - .feature_bits = 0, - .block_erasers = {}, - }, - - { - .vendor = "Programmer", - .name = "Opaque flash chip", - .bustype = BUS_PROG, - .manufacture_id = PROGMANUF_ID, - .model_id = PROGDEV_ID, - .total_size = 0, - .page_size = 256, - /* probe is assumed to work, rest will be filled in by probe */ - .tested = TEST_OK_PROBE, - .probe = probe_opaque, - /* eraseblock sizes will be set by the probing function */ - .block_erasers = - { - { - .block_erase = erase_opaque, - } - }, - .write = write_opaque, - .read = read_opaque, - }, - - { - .vendor = "AMIC", - .name = "unknown AMIC SPI chip", - .bustype = BUS_SPI, - .manufacture_id = AMIC_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid4, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "Atmel", - .name = "unknown Atmel SPI chip", - .bustype = BUS_SPI, - .manufacture_id = ATMEL_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "Eon", - .name = "unknown Eon SPI chip", - .bustype = BUS_SPI, - .manufacture_id = EON_ID_NOPREFIX, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "Macronix", - .name = "unknown Macronix SPI chip", - .bustype = BUS_SPI, - .manufacture_id = MACRONIX_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "PMC", - .name = "unknown PMC SPI chip", - .bustype = BUS_SPI, - .manufacture_id = PMC_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "SST", - .name = "unknown SST SPI chip", - .bustype = BUS_SPI, - .manufacture_id = SST_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "ST", - .name = "unknown ST SPI chip", - .bustype = BUS_SPI, - .manufacture_id = ST_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "Sanyo", - .name = "unknown Sanyo SPI chip", - .bustype = BUS_SPI, - .manufacture_id = SANYO_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "Winbond", - .name = "unknown Winbond (ex Nexcom) SPI chip", - .bustype = BUS_SPI, - .manufacture_id = WINBOND_NEX_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .probe_timing = TIMING_ZERO, - .write = NULL, - .read = NULL, - }, - - { - .vendor = "Generic", - .name = "unknown SPI chip (RDID)", - .bustype = BUS_SPI, - .manufacture_id = GENERIC_MANUF_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rdid, - .write = NULL, - }, - - { - .vendor = "Generic", - .name = "unknown SPI chip (REMS)", - .bustype = BUS_SPI, - .manufacture_id = GENERIC_MANUF_ID, - .model_id = GENERIC_DEVICE_ID, - .total_size = 0, - .page_size = 256, - .tested = TEST_BAD_PREW, - .probe = probe_spi_rems, - .write = NULL, - }, - - {0} -}; - -const unsigned int flashchips_size = ARRAY_SIZE(flashchips); |