diff options
Diffstat (limited to 'docs/bsd')
| -rw-r--r-- | docs/bsd/freebsd.md | 51 | ||||
| -rw-r--r-- | docs/bsd/index.md | 1 | ||||
| -rw-r--r-- | docs/bsd/netbsd.md | 53 | ||||
| -rw-r--r-- | docs/bsd/openbsd.md | 55 |
4 files changed, 94 insertions, 66 deletions
diff --git a/docs/bsd/freebsd.md b/docs/bsd/freebsd.md index fa7c8167..4da37192 100644 --- a/docs/bsd/freebsd.md +++ b/docs/bsd/freebsd.md @@ -59,18 +59,23 @@ Prepare the USB drive (in LibertyBSD or OpenBSD) If you downloaded your ISO on a LibertyBSD or OpenBSD system, here is how to create the bootable FreeBSD USB drive: -Connect the USB drive. Check dmesg:\ -**\$ dmesg | tail**\ -Check to confirm which drive it is, for example, if you think its sd3:\ -**\$ disklabel sd3** +Connect the USB drive. Check dmesg: + + $ dmesg | tail + +Check to confirm which drive it is, for example, if you think its sd3: + + $ disklabel sd3 Check that it wasn't automatically mounted. If it was, unmount it. For -example:\ -**\$ doas umount /dev/sd3i**\ +example: + + $ doas umount /dev/sd3i dmesg told you what device it is. Overwrite the drive, writing the -FreeBSD installer to it with dd. For example:\ -**\$ doas dd if=freebsd.img of=/dev/rsdXc bs=1M; sync**\ +FreeBSD installer to it with dd. For example: + + $ doas dd if=freebsd.img of=/dev/rsdXc bs=1M; sync You should now be able to boot the installer from your USB drive. Continue reading, for information about how to do that. @@ -83,20 +88,24 @@ Prepare the USB drive (in GNU+Linux) If you downloaded your ISO on a GNU+Linux system, here is how to create the bootable FreeBSD USB drive: -Connect the USB drive. Check dmesg:\ -**\$ dmesg**\ -Check lsblk to confirm which drive it is:\ -**\$ lsblk** +Connect the USB drive. Check dmesg: + + $ dmesg +Check lsblk to confirm which drive it is: + + $ lsblk Check that it wasn't automatically mounted. If it was, unmount it. For -example:\ -**\$ sudo umount /dev/sdX\***\ -**\# umount /dev/sdX\*** +example: + + $ sudo umount /dev/sdX\* + # umount /dev/sdX\* dmesg told you what device it is. Overwrite the drive, writing your -distro ISO to it with dd. For example:\ -**\$ sudo dd if=freebsd.img of=/dev/sdX bs=8M; sync**\ -**\# dd if=freebsd.img of=/dev/sdX bs=8M; sync** +distro ISO to it with dd. For example: + + $ sudo dd if=freebsd.img of=/dev/sdX bs=8M; sync + # dd if=freebsd.img of=/dev/sdX bs=8M; sync You should now be able to boot the installer from your USB drive. Continue reading, for information about how to do that. @@ -110,9 +119,9 @@ Installing FreeBSD without full disk encryption Press C in GRUB to access the command line: -grub> **kfreebsd (usb0,gpt3)/boot/kernel/kernel**\ -grub> **set FreeBSD.vfs.mountfrom=ufs:/dev/da1p3**\ -grub> **boot** + grub> kfreebsd (usb0,gpt3)/boot/kernel/kernel + grub> set FreeBSD.vfs.mountfrom=ufs:/dev/da1p3\ + grub> boot It will start booting into the FreeBSD installer. Follow the normal process for installing FreeBSD. diff --git a/docs/bsd/index.md b/docs/bsd/index.md index 8f0aad75..7b2aecbe 100644 --- a/docs/bsd/index.md +++ b/docs/bsd/index.md @@ -11,6 +11,7 @@ instructions have yet to be written.** - [How to install NetBSD on a libreboot system](netbsd.html) - [How to install LibertyBSD or OpenBSD on a libreboot system](openbsd.html) + - [How to install FreeBSD on a libreboot system](freebsd.html) diff --git a/docs/bsd/netbsd.md b/docs/bsd/netbsd.md index 286d9495..cccd5263 100644 --- a/docs/bsd/netbsd.md +++ b/docs/bsd/netbsd.md @@ -55,18 +55,23 @@ Prepare the USB drive (in LibertyBSD or NetBSD) If you downloaded your ISO on a LibertyBSD or NetBSD system, here is how to create the bootable NetBSD USB drive: -Connect the USB drive. Check dmesg:\ -**\$ dmesg | tail**\ -Check to confirm which drive it is, for example, if you think its sd3:\ -**\$ disklabel sd3** +Connect the USB drive. Check dmesg: + + $ dmesg | tail + +Check to confirm which drive it is, for example, if you think its sd3: + + $ disklabel sd3 Check that it wasn't automatically mounted. If it was, unmount it. For -example:\ -**\$ doas umount /dev/sd3i**\ +example: + + $ doas umount /dev/sd3i dmesg told you what device it is. Overwrite the drive, writing the -NetBSD installer to it with dd. For example:\ -**\$ doas netbsd.iso of=/dev/rsdXc bs=1M; sync**\ +NetBSD installer to it with dd. For example: + + $ doas netbsd.iso of=/dev/rsdXc bs=1M; sync You should now be able to boot the installer from your USB drive. Continue reading, for information about how to do that. @@ -79,20 +84,24 @@ Prepare the USB drive (in GNU+Linux) If you downloaded your ISO on a GNU+Linux system, here is how to create the bootable NetBSD USB drive: -Connect the USB drive. Check dmesg:\ -**\$ dmesg**\ -Check lsblk to confirm which drive it is:\ -**\$ lsblk** +Connect the USB drive. Check dmesg: + + $ dmesg +Check lsblk to confirm which drive it is: + + $ lsblk Check that it wasn't automatically mounted. If it was, unmount it. For -example:\ -**\$ sudo umount /dev/sdX\***\ -**\# umount /dev/sdX\*** +example: + + $ sudo umount /dev/sdX\* + # umount /dev/sdX\* dmesg told you what device it is. Overwrite the drive, writing your -distro ISO to it with dd. For example:\ -**\$ sudo dd if=install60.fs of=/dev/sdX bs=8M; sync**\ -**\# dd if=netbsd.iso of=/dev/sdX bs=8M; sync** +distro ISO to it with dd. For example: + + $ sudo dd if=install60.fs of=/dev/sdX bs=8M; sync + # dd if=netbsd.iso of=/dev/sdX bs=8M; sync You should now be able to boot the installer from your USB drive. Continue reading, for information about how to do that. @@ -107,8 +116,8 @@ Installing NetBSD without full disk encryption You might have to use an external USB keyboard during the installation. Press C to access the GRUB terminal. -grub> **knetbsd -r sd0a (usb0,netbsd1)/netbsd**\ -grub> **boot** + grub> knetbsd -r sd0a (usb0,netbsd1)/netbsd + grub> boot It will start booting into the NetBSD installer. Follow the normal process for installing NetBSD. @@ -131,8 +140,8 @@ Booting Press C in GRUB to access the command line: -grub> **knetbsd -r wd0a (ahci0,netbsd1)/netbsd**\ -grub> **boot** + grub> knetbsd -r wd0a (ahci0,netbsd1)/netbsd + grub> boot NetBSD will start booting. Yay! diff --git a/docs/bsd/openbsd.md b/docs/bsd/openbsd.md index 53086ed1..908e9a38 100644 --- a/docs/bsd/openbsd.md +++ b/docs/bsd/openbsd.md @@ -4,7 +4,7 @@ NOTE: This guide was written for OpenBSD by the person who contributed it, but the libreboot project recommends LibertyBSD. LibertyBSD is a version of OpenBSD without proprietary software in the repositories (OpenBSD distributes firmware blobs for devices inside its kernel). Go -to the [LibertyBSD website](http://libertybsd.net/) \-- TODO: test on +to the [LibertyBSD website](http://libertybsd.net/) -- TODO: test on LibertyBSD and prioritise that in this guide. This section relates to preparing, booting and installing OpenBSD on @@ -37,18 +37,23 @@ Prepare the USB drive (in LibertyBSD or OpenBSD) If you downloaded your ISO on a LibertyBSD or OpenBSD system, here is how to create the bootable LibertyBSD/OpenBSD USB drive: -Connect the USB drive. Check dmesg:\ -**\$ dmesg | tail**\ -Check to confirm which drive it is, for example, if you think its sd3:\ -**\$ disklabel sd3** +Connect the USB drive. Check dmesg: + + $ dmesg | tail + +Check to confirm which drive it is, for example, if you think its sd3: + + $ disklabel sd3 Check that it wasn't automatically mounted. If it was, unmount it. For -example:\ -**\$ doas umount /dev/sd3i**\ +example: + + $ doas umount /dev/sd3i dmesg told you what device it is. Overwrite the drive, writing the -OpenBSD installer to it with dd. For example:\ -**\$ doas dd if=install60.fs of=/dev/rsdXc bs=1M; sync**\ +OpenBSD installer to it with dd. For example: + + $ doas dd if=install60.fs of=/dev/rsdXc bs=1M; sync You should now be able to boot the installer from your USB drive. Continue reading, for information about how to do that. @@ -78,20 +83,24 @@ Prepare the USB drive (in GNU+Linux) If you downloaded your ISO on a GNU+Linux system, here is how to create the bootable OpenBSD USB drive: -Connect the USB drive. Check dmesg:\ -**\$ dmesg**\ -Check lsblk to confirm which drive it is:\ -**\$ lsblk** +Connect the USB drive. Check dmesg: + + $ dmesg +Check lsblk to confirm which drive it is: + + $ lsblk Check that it wasn't automatically mounted. If it was, unmount it. For -example:\ -**\$ sudo umount /dev/sdX\***\ -**\# umount /dev/sdX\*** +example: + + $ sudo umount /dev/sdX\* + # umount /dev/sdX\* dmesg told you what device it is. Overwrite the drive, writing your -distro ISO to it with dd. For example:\ -**\$ sudo dd if=install60.fs of=/dev/sdX bs=8M; sync**\ -**\# dd if=install60.fs of=/dev/sdX bs=8M; sync** +distro ISO to it with dd. For example: + + $ sudo dd if=install60.fs of=/dev/sdX bs=8M; sync + # dd if=install60.fs of=/dev/sdX bs=8M; sync You should now be able to boot the installer from your USB drive. Continue reading, for information about how to do that. @@ -105,8 +114,8 @@ Installing OpenBSD without full disk encryption Press C in GRUB to access the command line: -grub> **kopenbsd (usb0,openbsd1)/6.0/amd64/bsd.rd**\ -grub> **boot** + grub> kopenbsd (usb0,openbsd1)/6.0/amd64/bsd.rd + grub> boot It will start booting into the OpenBSD installer. Follow the normal process for installing OpenBSD. @@ -152,8 +161,8 @@ Booting Press C in GRUB to access the command line: -grub> **kopenbsd -r sd0a (ahci0,openbsd1)/bsd**\ -grub> **boot** + grub> kopenbsd -r sd0a (ahci0,openbsd1)/bsd + grub> boot OpenBSD will start booting. Yay! |