diff options
Diffstat (limited to 'docs/git/index.html')
| -rw-r--r-- | docs/git/index.html | 47 |
1 files changed, 30 insertions, 17 deletions
diff --git a/docs/git/index.html b/docs/git/index.html index a9d995a3..88a547c7 100644 --- a/docs/git/index.html +++ b/docs/git/index.html @@ -323,6 +323,8 @@ </h2> <ul> <li>General setup / Expert mode = <i>enable</i></li> + <li>General / Use CMOS for configuration values = <i>enable</i></li> + <li>General / Load default configuration values into CMOS on each boot = <i>enable</i></li> <li>Mainboard / Mainboard vendor = <i>Lenovo</i></li> <li>Mainboard / Mainboard model = <i>ThinkPad X60 / X60s / X60t</i></li> <li>Mainboard / ROM chip size = <i>2048 KB (2 MB)</i></li> @@ -335,12 +337,11 @@ to enable coreboot framebuffer for a separate set of ROM images, in each machine.</li> </ul> </li> - <li>Generic Drivers / Digitizer = <i>Autodetect</i></li> <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> - <li>Generic Drivers / Type of dongle = <i>BeagleBone Black</i></li> + <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> <li>Generic Drivers / Digitizer = <i>Present</i></li> - <li>Console / Send console output to a CBMEM buffer = <i>enable</i></li> + <li>Console / USB dongle log output = <i>enable</i></li> <li>Payload / Add a payload = <i>An ELF executable payload</i></li> <li>Payload / Payload path and filename = <i>grub.elf</i></li> @@ -368,6 +369,8 @@ <ul> <li>General setup / Expert mode = <i>enable</i></li> <li>General setup / Local version string = <i>79ETE7WW (2.27 )</i></li> + <li>General / Use CMOS for configuration values = <i>enable</i></li> + <li>General / Load default configuration values into CMOS on each boot = <i>enable</i></li> <li>Mainboard / Mainboard vendor = <i>Lenovo</i></li> <li>Mainboard / Mainboard model = <i>ThinkPad T60 / T60p</i></li> <li>Mainboard / ROM chip size = <i>2048 KB (2 MB)</i></li> @@ -386,8 +389,8 @@ </li> <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> - <li>Generic Drivers / Type of dongle = <i>BeagleBone Black</i></li> - <li>Console / Send console output to a CBMEM buffer = <i>enable</i></li> + <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> + <li>Console / USB dongle log output = <i>enable</i></li> <li>Payload / Add a payload = <i>An ELF executable payload</i></li> <li>Payload / Payload path and filename = <i>grub.elf</i></li> @@ -418,6 +421,8 @@ </p> <ul> <li>General / Expert mode = <i>enable</i></li> + <li>General / Use CMOS for configuration values = <i>enable</i></li> + <li>General / Load default configuration values into CMOS on each boot = <i>enable</i></li> <li>Mainboard / Mainboard vendor = <i>Lenovo</i></li> <li>Mainboard / Mainboard model = <i>ThinkPad X200</i></li> <li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li> @@ -433,8 +438,8 @@ </li> <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> - <li>Generic Drivers / Type of dongle = <i>BeagleBone Black</i></li> - <li>Console / Send console output to a CBMEM buffer = <i>enable</i></li> + <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> + <li>Console / USB dongle log output = <i>enable</i></li> <li>Payload / Add a payload = <i>An ELF executable payload</i></li> <li>Payload / Payload path and filename = <i>grub.elf</i></li> @@ -462,6 +467,8 @@ </p> <ul> <li>General / Expert mode = <i>enable</i></li> + <li>General / Use CMOS for configuration values = <i>enable</i></li> + <li>General / Load default configuration values into CMOS on each boot = <i>enable</i></li> <li>Mainboard / Mainboard vendor = <i>Lenovo</i></li> <li>Mainboard / Mainboard model = <i>ThinkPad R400</i></li> <li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li> @@ -477,8 +484,8 @@ </li> <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> - <li>Generic Drivers / Type of dongle = <i>BeagleBone Black</i></li> - <li>Console / Send console output to a CBMEM buffer = <i>enable</i></li> + <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> + <li>Console / USB dongle log output = <i>enable</i></li> <li>Payload / Add a payload = <i>An ELF executable payload</i></li> <li>Payload / Payload path and filename = <i>grub.elf</i></li> @@ -506,6 +513,8 @@ </p> <ul> <li>General / Expert mode = <i>enable</i></li> + <li>General / Use CMOS for configuration values = <i>enable</i></li> + <li>General / Load default configuration values into CMOS on each boot = <i>enable</i></li> <li>Mainboard / Mainboard vendor = <i>Lenovo</i></li> <li>Mainboard / Mainboard model = <i>ThinkPad T400</i></li> <li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li> @@ -521,8 +530,8 @@ </li> <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> - <li>Generic Drivers / Type of dongle = <i>BeagleBone Black</i></li> - <li>Console / Send console output to a CBMEM buffer = <i>enable</i></li> + <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> + <li>Console / USB dongle log output = <i>enable</i></li> <li>Payload / Add a payload = <i>An ELF executable payload</i></li> <li>Payload / Payload path and filename = <i>grub.elf</i></li> @@ -550,6 +559,8 @@ </p> <ul> <li>General / Expert mode = <i>enable</i></li> + <li>General / Use CMOS for configuration values = <i>enable</i></li> + <li>General / Load default configuration values into CMOS on each boot = <i>enable</i></li> <li>Mainboard / Mainboard vendor = <i>Lenovo</i></li> <li>Mainboard / Mainboard model = <i>ThinkPad T500</i></li> <li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li> @@ -565,8 +576,8 @@ </li> <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> - <li>Generic Drivers / Type of dongle = <i>BeagleBone Black</i></li> - <li>Console / Send console output to a CBMEM buffer = <i>enable</i></li> + <li>Generic Drivers / Type of dongle = <i>Net20DC or compatible</i></li> + <li>Console / USB dongle log output = <i>enable</i></li> <li>Payload / Add a payload = <i>An ELF executable payload</i></li> <li>Payload / Payload path and filename = <i>grub.elf</i></li> @@ -592,6 +603,8 @@ <ul> <li>General / Expert mode = <i>enable</i></li> <li>General / Local version string = <i>" MB21.88Z.00A5.B07.0706270922"</i> (without the quotes)</li> + <li>General / Use CMOS for configuration values = <i>enable</i></li> + <li>General / Load default configuration values into CMOS on each boot = <i>enable</i></li> <li>Mainboard / Mainboard vendor = <i>Apple</i></li> <li>Mainboard / Mainboard model = <i>Macbook2,1 ICH7 TESTING</i></li> <li>Mainboard / ROM chip size = <i>2048 KB (2 MB)</i></li> @@ -610,8 +623,8 @@ </li> <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> <li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li> - <li>Generic Drivers / Type of dongle = <i>BeagleBone Black</i></li> - <li>Console / Send console output to a CBMEM buffer = <i>enable</i></li> + <li>Generic Drivers / Type of dongle = <i></i></li> + <li>Console / USB dongle log output = <i>enable</i></li> <li>Payload / Add a payload = <i>An ELF executable payload</i></li> <li>Payload / Payload path and filename = <i>grub.elf</i></li> @@ -646,7 +659,7 @@ to enable coreboot text-mode for a separate set of ROM images, in each machine.</li> </ul> </li> - <li>Console / Send console output to a CBMEM buffer = <i>enable</i></li> + <li>Payload / Add a payload = <i>An ELF executable payload</i></li> <li>Payload / Payload path and filename = <i>grub.elf</i></li> </ul> @@ -680,7 +693,7 @@ to enable coreboot text-mode for a separate set of ROM images, in each machine.</li> </ul> </li> - <li>Console / Send console output to a CBMEM buffer = <i>enable</i></li> + <li>Payload / Add a payload = <i>An ELF executable payload</i></li> <li>Payload / Payload path and filename = <i>grub.elf</i></li> </ul> |