diff options
Diffstat (limited to 'docs/git')
| -rw-r--r-- | docs/git/index.html | 50 |
1 files changed, 25 insertions, 25 deletions
diff --git a/docs/git/index.html b/docs/git/index.html index e21bf726..e2207602 100644 --- a/docs/git/index.html +++ b/docs/git/index.html @@ -152,11 +152,11 @@ external flashing will be safe regardless. Each ROM contains identical data inside the two final 64K region in the file*. This corresponds to the final two 64K regions in the flash chip. Lenovo BIOS will prevent you from writing the - final one, so running "<b>bucts 1</b>" will set the machine to boot from the other block instead (which + final one, so running "<b>bucts 1</b>" will set the system to boot from the other block instead (which is writeable along with everything beneath it when using a patched flashrom. see <a href="#build_flashrom">#build_flashrom</a>). After shutting down and booting up after the first flash of libreboot, the final 64K block is writeable so you flash the ROM again with an unpatched flashrom and run "<b>bucts 0</b>" to - make the machine boot from the normal (highest) block again. + make the system boot from the normal (highest) block again. </p> <p> @@ -289,7 +289,7 @@ <p> Configurations are then saved as files called <b>".config"</b>. Copies of each configuration used - for each machine type by the libreboot build scripts are stored in resources/libreboot/config/ + for each system type by the libreboot build scripts are stored in resources/libreboot/config/ </p> <div class="subsection"> @@ -334,7 +334,7 @@ Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) <ul> <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot framebuffer for a separate set of ROM images, in each machine.</li> + to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> </ul> </li> <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> @@ -355,7 +355,7 @@ </ul> <p> The resulting .config file was saved as resources/libreboot/config/<b>kfsn4-dre/config</b> and is used by the build - scripts for this machine. + scripts for this system. </p> </div> @@ -376,7 +376,7 @@ Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) <ul> <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot framebuffer for a separate set of ROM images, in each machine.</li> + to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> </ul> </li> <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> @@ -397,7 +397,7 @@ </ul> <p> The resulting .config file was saved as resources/libreboot/config/<b>x60/config</b> and is used by the build - scripts for this machine. + scripts for this system. </p> <p> This configuration is used on all variants: X60, X60S and X60 Tablet. @@ -426,7 +426,7 @@ Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) <ul> <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot framebuffer for a separate set of ROM images, in each machine.</li> + to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> </ul> </li> <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> @@ -446,7 +446,7 @@ </ul> <p> The resulting .config file was saved as resources/libreboot/config/<b>t60/config</b> and is used by the build - scripts for this machine. + scripts for this system. </p> <p> It is believed that the motherboards on 14.1" and 15.1" T60s are the same, so the same configuration is used @@ -475,7 +475,7 @@ Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) <ul> <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot framebuffer for a separate set of ROM images, in each machine.</li> + to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> </ul> </li> <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> @@ -497,7 +497,7 @@ <p> The resulting .config file was saved as resources/libreboot/config/<b>x200_8mb/config</b> and resources/libreboot/config/<b>x200_4mb/config</b> and is used by the build - scripts for this machine. + scripts for this system. </p> </div> @@ -522,7 +522,7 @@ Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) <ul> <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot framebuffer for a separate set of ROM images, in each machine.</li> + to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> </ul> </li> <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> @@ -543,7 +543,7 @@ <p> The resulting .config file was saved as resources/libreboot/config/<b>r400_8mb/config</b> and resources/libreboot/config/<b>r400_4mb/config</b> and is used by the build - scripts for this machine. + scripts for this system. </p> </div> @@ -568,7 +568,7 @@ Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) <ul> <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot framebuffer for a separate set of ROM images, in each machine.</li> + to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> </ul> </li> <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> @@ -589,7 +589,7 @@ <p> The resulting .config file was saved as resources/libreboot/config/<b>t400_8mb/config</b> and resources/libreboot/config/<b>t400_4mb/config</b> and is used by the build - scripts for this machine. + scripts for this system. </p> </div> @@ -614,7 +614,7 @@ Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) <ul> <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot framebuffer for a separate set of ROM images, in each machine.</li> + to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> </ul> </li> <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> @@ -635,7 +635,7 @@ <p> The resulting .config file was saved as resources/libreboot/config/<b>t500_8mb/config</b> and resources/libreboot/config/<b>t500_4mb/config</b> and is used by the build - scripts for this machine. + scripts for this system. </p> </div> @@ -661,7 +661,7 @@ Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) <ul> <li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot framebuffer for a separate set of ROM images, in each machine.</li> + to enable coreboot framebuffer for a separate set of ROM images, in each system.</li> </ul> </li> <li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li> @@ -681,7 +681,7 @@ </ul> <p> The resulting .config file was saved as resources/libreboot/config/<b>macbook21/config</b> and is used by the build - scripts for this machine. <b>This config is also used for the MacBook1,1</b>. + scripts for this system. <b>This config is also used for the MacBook1,1</b>. </p> </div> @@ -699,7 +699,7 @@ Display / Keep VESA framebuffer = <i>enable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) <ul> <li>Libreboot provides this with framebuffer enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot text-mode for a separate set of ROM images, in each machine.</li> + to enable coreboot text-mode for a separate set of ROM images, in each system.</li> </ul> </li> @@ -715,7 +715,7 @@ </ul> <p> The resulting .config file was saved as resources/libreboot/config/<b>qemu_i440fx_piix4/config</b> and is used by the build - scripts for this machine. + scripts for this system. </p> </div> @@ -733,7 +733,7 @@ Display / Keep VESA framebuffer = <i>enable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer) <ul> <li>Libreboot provides this with framebuffer enabled by default, but it automatically patches a copy of the config at build time - to enable coreboot text-mode for a separate set of ROM images, in each machine.</li> + to enable coreboot text-mode for a separate set of ROM images, in each system.</li> </ul> </li> @@ -749,7 +749,7 @@ </ul> <p> The resulting .config file was saved as resources/libreboot/config/<b>qemu_q35_ich9/config</b> and is used by the build - scripts for this machine. + scripts for this system. </p> </div> @@ -874,7 +874,7 @@ </p> <p> <b>To include statically linked i686 and x86_64 binaries for bucts and flashrom, - you will need to build them on a chroot, a virtual machine or a real + you will need to build them on a chroot, a virtual system or a real system where the host uses each given architecture. These packages are difficult to cross-compile, and the libreboot project is still figuring out how to deal with them.</b> @@ -917,7 +917,7 @@ </p> <p> - The ROM images will be stored in separate archives for each machine, under <b>release/rom/</b>. + The ROM images will be stored in separate archives for each system, under <b>release/rom/</b>. </p> </div> |