diff options
Diffstat (limited to 'docs/git')
| -rw-r--r-- | docs/git/index.md | 78 |
1 files changed, 52 insertions, 26 deletions
diff --git a/docs/git/index.md b/docs/git/index.md index 11ecc0ff..306d5a6e 100644 --- a/docs/git/index.md +++ b/docs/git/index.md @@ -32,13 +32,16 @@ statically compiled executables for the utilities are included.** For Debian Stretch (may also work on Debian Jessie), you can run the -following command:\ +following command: + $ sudo ./oldbuild dependencies debian (this will also work in Devuan) -For Parabola, you can run the following command:\ +For Parabola, you can run the following command: + $ sudo ./oldbuild dependencies parabola -or:\ +or: + # **./oldbuild dependencies parabola** @@ -62,21 +65,24 @@ First, [install the build dependencies](#build_dependencies). Since libreboot makes extensive use of git, you need to configure git properly. If you have not yet configured git, then the minimum -requirement is:\ +requirement is: + $ git config \--global user.name "Your Name" $ git config \--global user.email your@emailaddress.com This is what will also appear in git logs if you ever commit your own changes to a given repository. For more information, see <http://git-scm.com/doc>. -Another nice config for you (optional, but recommended):\ +Another nice config for you (optional, but recommended): + $ git config \--global core.editor nano $ git config \--global color.status auto $ git config \--global color.branch auto $ git config \--global color.interactive auto $ **git config \--global color.diff auto** -After that, run the script:\ +After that, run the script: + $ **./download all** What this did was download everything (grub, coreboot, memtest86+, @@ -122,7 +128,8 @@ the mainboard. Removing that battery removes power to BUC.TS, resetting the bit back to 0 (if you previously set it to 1). BUC.TS utility is included in libreboot\_src.tar.xz and -libreboot\_util.tar.xz.\ +libreboot\_util.tar.xz. + **If you downloaded from git, follow [#build\_meta](#build_meta) before you proceed.** @@ -135,10 +142,12 @@ If you have the binary release archive, you'll find executables under First, [install the build dependencies](#build_dependencies). -To build bucts, do this in the main directory:\ +To build bucts, do this in the main directory: + $ **./oldbuild module bucts** -To statically compile it, do this:\ +To statically compile it, do this: + $ **./oldbuild module bucts static** The "builddeps" script in libreboot\_src also makes use of @@ -155,7 +164,8 @@ Flashrom is the utility for flashing/dumping ROM images. This is what you will use to install libreboot. Flashrom source code is included in libreboot\_src.tar.xz and -libreboot\_util.tar.xz.\ +libreboot\_util.tar.xz. + **If you downloaded from git, follow [#build\_meta](#build_meta) before you proceed.** @@ -166,10 +176,12 @@ flashrom from source, continue reading. First, [install the build dependencies](#build_dependencies). -To build it, do the following in the main directory:\ +To build it, do the following in the main directory: + $ **./oldbuild module flashrom** -To statically compile it, do the following in the main directory:\ +To statically compile it, do the following in the main directory: + $ **./oldbuild module flashrom static** After you've done that, under ./flashrom/ you will find the following @@ -213,24 +225,29 @@ First, [install the build dependencies](#build_dependencies). If you downloaded libreboot from git, refer to [#build\_meta](#build_meta). -Build all of the components used in libreboot:\ +Build all of the components used in libreboot: + $ **./oldbuild module all** You can also build each modules separately, using *./oldbuild module -modulename*. To see the possible values for *modulename*, use:\ +modulename*. To see the possible values for *modulename*, use: + $ **./oldbuild module list** -After that, build the ROM images (for all boards):\ +After that, build the ROM images (for all boards): + $ ./oldbuild roms withgrub Alternatively, you can build for a specific board or set of boards. For -example:\ +example: + $ ./oldbuild roms withgrub x60 $ ./oldbuild roms withgrub x200\_8mb $ ./oldbuild roms withgrub x60 x200\_8mb The list of board options can be found by looking at the directory names in **resources/libreboot/config/grub/**. -To clean (reverse) everything, do the following:\ +To clean (reverse) everything, do the following: + $ **./oldbuild clean all** The ROM images will be stored under **bin/*payload*/**, where *payload* @@ -258,23 +275,29 @@ ${version} string on the directory under *release/oldbuildsystem/*, and in the file names of the archives. Otherwise, whatever git uses for *git describe \--tags HEAD* will be used. -Utilities (static executables):\ +Utilities (static executables): + $ **./oldbuild release util** -Archive containing flashrom and bucts source code:\ +Archive containing flashrom and bucts source code: + $ **./oldbuild release tobuild** Documentation archive (**does not work on \_src release archive, only -git**):\ +git**): + $ **./oldbuild release docs** -ROM image archives:\ +ROM image archives: + $ **./oldbuild release roms** -Source code archive:\ +Source code archive: + $ **./oldbuild release src** -SHA512 sums of all other release archives that have been generated:\ +SHA512 sums of all other release archives that have been generated: + $ **./oldbuild release sha512sums** If you are building on an i686 host, this will build statically linked @@ -303,7 +326,8 @@ libreboot\_util, for: - flashrom If you are building binaries on a live system or chroot (for -flashrom/bucts), you can use the following to statically link them:\ +flashrom/bucts), you can use the following to statically link them: + $ ./oldbuild module flashrom static $ **./oldbuild module bucts static** @@ -314,7 +338,8 @@ an X60/T60 while lenovo bios is present, working around the security restrictions). The command that you used for generating the release archives will also -run the following command:\ +run the following command: + $ ./oldbuild release tobuild The archive **tobuild.tar.xz** will have been created under **release/oldbuildsystem/**, containing bucts, flashrom and all other @@ -331,7 +356,8 @@ under **release/oldbuildsystem/rom/**. -Copyright © 2014, 2015, 2016 Leah Rowe <info@minifree.org>\ +Copyright © 2014, 2015, 2016 Leah Rowe <info@minifree.org> + Permission is granted to copy, distribute and/or modify this document under the terms of the Creative Commons Attribution-ShareAlike 4.0 International license or any later version published by Creative |