diff options
Diffstat (limited to 'docs/install/x60tablet_unbrick.md')
| -rw-r--r-- | docs/install/x60tablet_unbrick.md | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/docs/install/x60tablet_unbrick.md b/docs/install/x60tablet_unbrick.md index 3a04ad3f..f4baebf4 100644 --- a/docs/install/x60tablet_unbrick.md +++ b/docs/install/x60tablet_unbrick.md @@ -80,11 +80,11 @@ Remove that screw and then remove the board:\ Now wire up the BBB and the Pomona with your PSU.\ Refer to [bbb\_setup.md](bbb_setup.md) for how to setup the BBB for flashing.\ -**Note, the guide mentions a 3.3v DC PSU but you don't need this on the +*Note, the guide mentions a 3.3v DC PSU but you don't need this on the X60 Tablet: if you don't have or don't want to use an external PSU, then make sure not to connect the 3.3v leads mentioned in the guide; instead, connect the AC adapter (the one that normally charges your -battery) so that the board has power (but don't boot it up)** +battery) so that the board has power (but don't boot it up)* \ Correlate the following with the BBB guide linked above: @@ -111,7 +111,7 @@ SSH'd into the BBB: yourrom.rom -It should be **Verifying flash... VERIFIED** at the end. If flashrom +It should be `Verifying flash... VERIFIED` at the end. If flashrom complains about multiple flash chip definitions detected, then choose one of them following the instructions in the output. |