diff options
Diffstat (limited to 'docs/resources/text/x200s/cblog03.txt')
| -rw-r--r-- | docs/resources/text/x200s/cblog03.txt | 158 |
1 files changed, 0 insertions, 158 deletions
diff --git a/docs/resources/text/x200s/cblog03.txt b/docs/resources/text/x200s/cblog03.txt deleted file mode 100644 index d078a48a..00000000 --- a/docs/resources/text/x200s/cblog03.txt +++ /dev/null @@ -1,158 +0,0 @@ -USB - - -coreboot-4.0-7551-ge420139-dirty Wed Dec 10 16:34:05 GMT 2014 starting... -running main(bist = 0) -WARNING: Ignoring S4-assertion-width violation. -Stepping B3 -2 CPU cores -AMT enabled -capable of DDR2 of 800 MHz or lower -VT-d enabled -GMCH: GS45, using high performance mode by default -TXT enabled -Render frequency: 533 MHz -IGD enabled -PCIe-to-GMCH enabled -GMCH supports DDR3 with 1067 MT or less -GMCH supports FSB with up to 1067 MHz -SMBus controller enabled. -0:50:ff -2:51:b -DDR mask 4, DDR 3 -Bank 1 populated: - Raw card type: B - Row addr bits: 15 - Col addr bits: 10 - byte width: 1 - page size: 1024 - banks: 8 - ranks: 1 - tAAmin: 105 - tCKmin: 12 - Max clock: 666 MHz - CAS: 0x07e0 -DIMMs support 666 MHz, but chipset only runs at up to 533. Limiting... -Trying CAS 7, tCK 15. -Found compatible clock / CAS pair: 533 / 7. -Timing values: - tCLK: 15 - tRAS: 20 - tRP: 7 - tRCD: 7 - tRFC: 104 - tWR: 8 - tRD: 11 - tRRD: 4 - tFAW: 20 - tWL: 6 -Changing memory frequency: old 3, new 6. -Setting IGD memory frequencies for VCO #1. -Memory configured in single-channel mode. -Memory map: -TOM = 128MB -TOLUD = 128MB -TOUUD = 128MB -REMAP: base = 65535MB - limit = 0MB -usedMEsize: 0MB -Performing Jedec initialization at address 0x00000000. -Final timings for group 0 on channel 1: 6.0.2.6.4 -Final timings for group 1 on channel 1: 6.0.2.6.4 -Final timings for group 2 on channel 1: 6.0.2.8.3 -Final timings for group 3 on channel 1: 6.0.2.8.6 -Lower bound for byte lane 0 on channel 1: 0.0 -Upper bound for byte lane 0 on channel 1: 10.4 -Final timings for byte lane 0 on channel 1: 5.2 -Lower bound for byte lane 1 on channel 1: 0.0 -Upper bound for byte lane 1 on channel 1: 11.2 -Final timings for byte lane 1 on channel 1: 5.5 -Lower bound for byte lane 2 on channel 1: 0.0 -Upper bound for byte lane 2 on channel 1: 10.5 -Final timings for byte lane 2 on channel 1: 5.2 -Lower bound for byte lane 3 on channel 1: 0.0 -Upper bound for byte lane 3 on channel 1: 9.7 -Final timings for byte lane 3 on channel 1: 4.7 -Timing overflow during read training. -Read training failure: lower bound. -USB - - -coreboot-4.0-7551-ge420139-dirty Wed Dec 10 16:34:05 GMT 2014 starting... -running main(bist = 0) -Interrupted RAM init, reset required. -USB - - -coreboot-4.0-7551-ge420139-dirty Wed Dec 10 16:34:05 GMT 2014 starting... -running main(bist = 0) -Stepping B3 -2 CPU cores -AMT enabled -capable of DDR2 of 800 MHz or lower -VT-d enabled -GMCH: GS45, using high performance mode by default -TXT enabled -Render frequency: 533 MHz -IGD enabled -PCIe-to-GMCH enabled -GMCH supports DDR3 with 1067 MT or less -GMCH supports FSB with up to 1067 MHz -SMBus controller enabled. -0:50:ff -2:51:b -DDR mask 4, DDR 3 -Bank 1 populated: - Raw card type: B - Row addr bits: 15 - Col addr bits: 10 - byte width: 1 - page size: 1024 - banks: 8 - ranks: 1 - tAAmin: 105 - tCKmin: 12 - Max clock: 666 MHz - CAS: 0x07e0 -DIMMs support 666 MHz, but chipset only runs at up to 533. Limiting... -Trying CAS 7, tCK 15. -Found compatible clock / CAS pair: 533 / 7. -Timing values: - tCLK: 15 - tRAS: 20 - tRP: 7 - tRCD: 7 - tRFC: 104 - tWR: 8 - tRD: 11 - tRRD: 4 - tFAW: 20 - tWL: 6 -Setting IGD memory frequencies for VCO #1. -Memory configured in single-channel mode. -Memory map: -TOM = 128MB -TOLUD = 128MB -TOUUD = 128MB -REMAP: base = 65535MB - limit = 0MB -usedMEsize: 0MB -Performing Jedec initialization at address 0x00000000. -Final timings for group 0 on channel 1: 6.0.2.7.6 -Final timings for group 1 on channel 1: 6.0.2.6.6 -Final timings for group 2 on channel 1: 6.0.2.8.7 -Final timings for group 3 on channel 1: 6.1.0.2.5 -Lower bound for byte lane 0 on channel 1: 0.0 -Upper bound for byte lane 0 on channel 1: 10.3 -Final timings for byte lane 0 on channel 1: 5.1 -Lower bound for byte lane 1 on channel 1: 0.0 -Upper bound for byte lane 1 on channel 1: 11.3 -Final timings for byte lane 1 on channel 1: 5.5 -Lower bound for byte lane 2 on channel 1: 0.0 -Upper bound for byte lane 2 on channel 1: 10.5 -Final timings for byte lane 2 on channel 1: 5.2 -Lower bound for byte lane 3 on channel 1: 0.0 -Upper bound for byte lane 3 on channel 1: 9.6 -Final timings for byte lane 3 on channel 1: 4.7 -Timing overflow during read training. -Read training failure: lower bound. |