diff options
Diffstat (limited to 'docs/security')
| -rw-r--r-- | docs/security/t60_security.html | 6 | ||||
| -rw-r--r-- | docs/security/x60_security.html | 6 |
2 files changed, 6 insertions, 6 deletions
diff --git a/docs/security/t60_security.html b/docs/security/t60_security.html index 03bb2a08..bb2f9bb7 100644 --- a/docs/security/t60_security.html +++ b/docs/security/t60_security.html @@ -50,7 +50,7 @@ <p> This tutorial deals with reducing the number of devices that have direct memory access that could communicate with inputs/outputs that could be used to remotely - command the machine (or leak data). All of this is purely theoretical for the time being. + command the system (or leak data). All of this is purely theoretical for the time being. </p> </div> @@ -157,7 +157,7 @@ <p> Remove the shielding containing the motherboard, then flip it over. Remove these screws, placing them on a steady surface in the same layout as they were in before you removed them. Also, you should mark each screw hole after removing the - screw (a permanent marker pen will do), this is so that you have a point of reference when re-assembling the machine:<br/> + screw (a permanent marker pen will do), this is so that you have a point of reference when re-assembling the system:<br/> <img src="../images/t60_dev/0027.JPG" alt="" /> <img src="../images/t60_dev/0028.JPG" alt="" /> <img src="../images/t60_dev/0029.JPG" alt="" /> <img src="../images/t60_dev/0031.JPG" alt="" /> <img src="../images/t60_dev/0032.JPG" alt="" /> <img src="../images/t60_dev/0033.JPG" alt="" /> </p> @@ -170,7 +170,7 @@ record what you say, and use it to receive data from nearby devices if they're compromised too. Also, we do not know what the built-in microcode (in the CPU) is doing; it could theoretically be programmed to accept remote commands from some speaker somewhere (remote security hole). <b>In other words, - the machine could already be compromised from the factory.</b> + the system could already be compromised from the factory.</b> </p> <p> diff --git a/docs/security/x60_security.html b/docs/security/x60_security.html index bc2f36ce..8e84ccbc 100644 --- a/docs/security/x60_security.html +++ b/docs/security/x60_security.html @@ -56,7 +56,7 @@ <p> This tutorial deals with reducing the number of devices that have direct memory access that could communicate with inputs/outputs that could be used to remotely - command the machine (or leak data). All of this is purely theoretical for the time being. + command the system (or leak data). All of this is purely theoretical for the time being. </p> <h1 id="procedure">Disassembly</h1> @@ -104,7 +104,7 @@ </p> <p> - The following is a summary of what you will remove (already done to this machine):<br/> + The following is a summary of what you will remove (already done to this system):<br/> <img src="../images/x60_security/0001_overview.jpg" alt="" /><br/> Note: the blue lines represent antenna cables and modem cables. You don't need to remove these, but you can if you want (to make it tidier after removing other parts). I removed the antenna wires, the modem jack, the modem cable and @@ -119,7 +119,7 @@ record what you say, and use it to receive data from nearby devices if they're compromised too. Also, we do not know what the built-in microcode (in the CPU) is doing; it could theoretically be programmed to accept remote commands from some speaker somewhere (remote security hole). <b>In other words, - the machine could already be compromised from the factory.</b> + the system could already be compromised from the factory.</b> </p> <p> |