2 files changed, 64 insertions, 0 deletions
diff --git a/docs/src/install/index.texi b/docs/src/install/index.texi
index 9b7ddfbb..994bbf45 100644
--- a/docs/src/install/index.texi
+++ b/docs/src/install/index.texi
@@ -61,6 +61,8 @@ This section relates to installing libreboot on supported targets.
 @item
 @uref{kgpe-d16.html,KGPE-D16 (needed if running the proprietary firmware, or to unbrick)}
 @item
+@uref{kcma-d8.html,KCMA-D8 (needed if running the proprietary firmware, or to unbrick)}
+@item
 @uref{x60_unbrick.html,ThinkPad X60: Recovery guide}
 @item
 @uref{x60tablet_unbrick.html,ThinkPad X60 Tablet: Recovery guide}
@@ -128,6 +130,7 @@ Look at the @ref{#rom,list of ROM images} to see which image is compatible with
 * Are you currently running the original proprietary firmware?::
 * ASUS KFSN4-DRE?::
 * ASUS KGPE-D16?::
+* ASUS KCMA-D8?::
 * Are you currently running libreboot or coreboot?::
 * MAC address on GM45 X200/R400/T400/T500::
 * Flash chip size::
@@ -167,6 +170,17 @@ If you already have coreboot or libreboot installed, without write protection on
 
 Do check the HCL entry: @uref{../hcl/kgpe-d16.html,../hcl/kgpe-d16.html}
 
+@node ASUS KCMA-D8?
+@section ASUS KCMA-D8?
+@anchor{#asus-kcma-d8}
+If you have the proprietary BIOS, you need to flash libreboot externally. See @uref{kcma-d8.html,kcma-d8.html}.
+
+If you already have coreboot or libreboot installed, without write protection on the flash chip, then you can do it in software (otherwise, see link above).
+
+@strong{DO NOT hot-swap the chip with your bare hands. Use a PDIP-8 chip extractor. These can be found online. See @uref{http://www.coreboot.org/Developer_Manual/Tools#Chip_removal_tools,http://www.coreboot.org/Developer_Manual/Tools#Chip_removal_tools}}
+
+Do check the HCL entry: @uref{../hcl/kcma-d8.html,../hcl/kcma-d8.html}
+
 @node Are you currently running libreboot or coreboot?
 @section Are you currently running libreboot (or coreboot)?
 @anchor{#are-you-currently-running-libreboot-or-coreboot}
diff --git a/docs/src/install/kcma-d8.texi b/docs/src/install/kcma-d8.texi
new file mode 100644
index 00000000..f2fe5281
--- /dev/null
+++ b/docs/src/install/kcma-d8.texi
@@ -0,0 +1,50 @@
+\input texinfo
+@documentencoding UTF-8
+
+@ifnottex
+@paragraphindent 0
+@end ifnottex
+@titlepage
+@title KCMA-D8 external flashing instructions
+@end titlepage
+
+@node Top
+@top KCMA-D8 external flashing instructions
+
+@menu
+* KCMA-D8 external flashing instructions::
+* KCMA-D8 boards and full systems with libreboot preinstalled::
+* External programmer::
+@end menu
+
+@node KCMA-D8 external flashing instructions
+@chapter KCMA-D8 external flashing instructions
+@anchor{#kcma-d8-external-flashing-instructions}
+Initial flashing instructions for KCMA-D8.
+
+This guide is for those who want libreboot on their ASUS KCMA-D8 motherboard, while they still have the proprietary ASUS BIOS present. This guide can also be followed (adapted) if you brick you board, to know how to recover.
+
+For more general information about this board, refer to @uref{../hcl/kcma-d8.html,../hcl/kcma-d8.html}.
+
+TODO: show photos here, and other info.
+
+@uref{index.html,Back to main index}
+
+@node External programmer
+@chapter External programmer
+@anchor{#external-programmer}
+Refer to @uref{bbb_setup.html,bbb_setup.html} for a guide on how to set up an external SPI programmer.
+
+The flash chip is in a PDIP 8 socket (SPI flash chip) on the motherboard, which you take out and then re-flash with libreboot, using the programmer. @strong{DO NOT} remove the chip with your hands. Use a chip extractor tool.
+
+Copyright © 2016 Francis Rowe <info@@gluglug.org.uk>@* Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license can be found at @uref{../resources/licenses/gfdl-1.3.txt,gfdl-1.3.txt}
+
+Updated versions of the license (when available) can be found at @uref{https://www.gnu.org/licenses/licenses.html,https://www.gnu.org/licenses/licenses.html}
+
+UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
+
+TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
+
+The disclaimer of warranties and limitation of liability provided above shall be interpreted in a manner that, to the extent possible, most closely approximates an absolute disclaimer and waiver of all liability.
+
+@bye