diff options
Diffstat (limited to 'docs/tasks.html')
| -rw-r--r-- | docs/tasks.html | 39 |
1 files changed, 20 insertions, 19 deletions
diff --git a/docs/tasks.html b/docs/tasks.html index e7e6530f..81e21264 100644 --- a/docs/tasks.html +++ b/docs/tasks.html @@ -46,15 +46,18 @@ </ul> </li> <li> - HP Pavillion 1035DX (same chipset as G505S. See notes above) - </li> - <li> - ASUS KFSN4-DRE - fam10h, already in coreboot, seems to have native graphics initialization already, + <b><i><u>HIGH PRIORITY!</u></i></b> ASUS KFSN4-DRE - fam10h, already in coreboot, seems to have native graphics initialization already, CPUs probably work without microcode updates, looks like this can already run blob-free. NOTE: PLCC flash chip (see vultureprog. BBB might be possible, it has GPIO pins etc) - not sure if software flashing is possible for initial install. </li> <li> + <b><i><u>HIGH PRIORITY!</u></i></b> F2A85-M and E350M1 (libreboot_*_headless.rom). Test openatom (video BIOS replacement). SMU firmware is a problem. XHCI firmware is a problem. + </li> + <li> + HP Pavillion 1035DX (same chipset as G505S. See notes above) + </li> + <li> BioStar AM1ML - just recently ported to coreboot. blob situation unknown. </li> <li> @@ -68,9 +71,6 @@ </ul> </li> <li> - F2A85-M and E350M1 (libreboot_*_headless.rom). Test openatom (video BIOS replacement). SMU firmware is a problem. XHCI firmware is a problem. - </li> - <li> <b>TODO: Add ARM candidates here (the above systems are all AMD).</b> </li> <li><b>This list needs to expand!</b></li> @@ -80,35 +80,36 @@ That doesn't mean Intel is off the table just yet: <ul> <li> - add roda rk9 support (contact nico to ask for more details about hw). - This is GM45 but these machines do not have a descriptor (no ME), should be easy - <ul> - <li>This board lacks native graphics initialization (it should be easy to add in Kconfig files, - but it has to be tested beforehand)</li> - </ul> - </li> - <li> - ThinkPad R500: <a href="http://projects.mtjm.eu/work_packages/43">http://projects.mtjm.eu/work_packages/43</a> + <b><u><i>HIGH PRIORITY!</i></u></b> ThinkPad R500: <a href="http://projects.mtjm.eu/work_packages/43">http://projects.mtjm.eu/work_packages/43</a> </li> <li> - ThinkPad W500: they all use switchable graphics (ATI+Intel), the native init code in coreboot (for Intel) + <b><u><i>HIGH PRIORITY!</i></u></b> ThinkPad W500: they all use switchable graphics (ATI+Intel), the native init code in coreboot (for Intel) needs to disable the ATI chip and use Intel (this isn't done yet) </li> <li> Non-lenovo GM45 laptops: <ul> - <li>Dell Latitude E6400 - quite a few of these online. This is a good laptop to target in coreboot and libreboot. + <li><b><u><i>HIGH PRIORITY!</i></u></b> Dell Latitude E6400 - quite a few of these online. This is a good laptop to target in coreboot and libreboot. NOTE: EC support. ALSO: DDR2 memory (coreboot raminit for GM45 currently only supports DDR3)</li> <li> Acer Aspire 5739 - NOTE: EC. ALSO: EC <ul> <li>Search <b>jv50 block diagram filetype:pdf</b> for schematics (jv50 is written on the board). - no docs were found for the EC chip, but it might be good enough to RE via serialice and ectool</li> + no docs were found for the EC chip, but it might be good enough to RE via serialice and ectool + - not a lot of these laptops available online, probably not worth it</li> </ul> </li> </ul> </li> <li> + add roda rk9 support (contact nico to ask for more details about hw). + This is GM45 but these machines do not have a descriptor (no ME), should be easy + <ul> + <li>This board lacks native graphics initialization (it should be easy to add in Kconfig files, + but it has to be tested beforehand)</li> + </ul> + </li> + <li> T400S and X301. These both seem to be GS45. X301 uses only the low-performance mode CPUs, so raminit is the main blocker there. They both probably use WSON-8 flash chips. </li> |