diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/install/images/x200/disassembly/0006.1.jpg | bin | 0 -> 32364 bytes | |||
| -rw-r--r-- | docs/install/x200_external.md | 20 |
2 files changed, 6 insertions, 14 deletions
diff --git a/docs/install/images/x200/disassembly/0006.1.jpg b/docs/install/images/x200/disassembly/0006.1.jpg Binary files differnew file mode 100644 index 00000000..1888012b --- /dev/null +++ b/docs/install/images/x200/disassembly/0006.1.jpg diff --git a/docs/install/x200_external.md b/docs/install/x200_external.md index 79ca3c96..1f2fa151 100644 --- a/docs/install/x200_external.md +++ b/docs/install/x200_external.md @@ -108,13 +108,14 @@ completely, since the flash chip is on the other side of the board). Remove these screws:\  -Push the keyboard forward, gently, then lift it off and disconnect it -from the board:\ +Gently push the keyboard towards the screen, then lift it off, and optionally +disconnect it from the board:\   -Pull the palm rest off, lifting from the left and right side at the back -of the palm rest:\ +Disconnect the cable of the fingerpring reader, and then pull up the palm rest, +lifting up the left and right side of it:\ +  Lift back the tape that covers a part of the flash chip, and then @@ -127,19 +128,10 @@ to your PSU:\   -Connect the 3.3V supply from your PSU to the flash chip (via the clip):\ +Connect the 3.3V DC supply from your PSU to the flash chip (via the clip):\   -Of course, make sure that your PSU is also plugged in and turn on:\ - - -This tutorial tells you to use an ATX PSU, for the 3.3V DC supply. The -PSU used when taking these photos is actually not an ATX PSU, but a PSU -that is designed specifically for providing 3.3V DC (an ATX PSU will -also work):\ - - Now, you should be ready to install libreboot. Flashrom binaries for ARM (tested on a BBB) are distributed in |
