diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/install/images/x200/disassembly/0006.1.jpg | bin | 0 -> 32364 bytes | |||
| -rw-r--r-- | docs/install/x200_external.md | 11 |
2 files changed, 6 insertions, 5 deletions
diff --git a/docs/install/images/x200/disassembly/0006.1.jpg b/docs/install/images/x200/disassembly/0006.1.jpg Binary files differnew file mode 100644 index 00000000..1888012b --- /dev/null +++ b/docs/install/images/x200/disassembly/0006.1.jpg diff --git a/docs/install/x200_external.md b/docs/install/x200_external.md index 79ca3c96..5f74901b 100644 --- a/docs/install/x200_external.md +++ b/docs/install/x200_external.md @@ -108,13 +108,14 @@ completely, since the flash chip is on the other side of the board). Remove these screws:\  -Push the keyboard forward, gently, then lift it off and disconnect it -from the board:\ +Gently push the keyboard towards the screen, then lift it off, and optionally +disconnect it from the board:\   -Pull the palm rest off, lifting from the left and right side at the back -of the palm rest:\ +Disconnect the cable of the fingerpring reader, and then pull up the palm rest, +lifting up the left and right side of it:\ +  Lift back the tape that covers a part of the flash chip, and then @@ -131,7 +132,7 @@ Connect the 3.3V supply from your PSU to the flash chip (via the clip):\   -Of course, make sure that your PSU is also plugged in and turn on:\ +Of course, make sure that your PSU is also plugged in and turned on:\  This tutorial tells you to use an ATX PSU, for the 3.3V DC supply. The |
