diff options
Diffstat (limited to 'resources/libreboot/patch/coreboot/2a3434757ef425dbdfedf1fc69e1a033a6e7310d/grub/kcma-d8')
3 files changed, 163 insertions, 0 deletions
diff --git a/resources/libreboot/patch/coreboot/2a3434757ef425dbdfedf1fc69e1a033a6e7310d/grub/kcma-d8/0001-nb-amd-mct_ddr3-Restore-previous-DQS-delay-values-on.patch b/resources/libreboot/patch/coreboot/2a3434757ef425dbdfedf1fc69e1a033a6e7310d/grub/kcma-d8/0001-nb-amd-mct_ddr3-Restore-previous-DQS-delay-values-on.patch new file mode 100644 index 00000000..905d73dd --- /dev/null +++ b/resources/libreboot/patch/coreboot/2a3434757ef425dbdfedf1fc69e1a033a6e7310d/grub/kcma-d8/0001-nb-amd-mct_ddr3-Restore-previous-DQS-delay-values-on.patch @@ -0,0 +1,39 @@ +From 9761ddff5c8e47d7b5321a8c98383970b4fb8683 Mon Sep 17 00:00:00 2001 +From: Timothy Pearson <tpearson@raptorengineeringinc.com> +Date: Mon, 7 Mar 2016 09:10:31 -0600 +Subject: [PATCH 1/2] nb/amd/mct_ddr3: Restore previous DQS delay values on + failed loop + +Change-Id: Iacfcd7f379d09a633973b4c3ef3cbb97e6d1f09f +Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> +--- + src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +diff --git a/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c b/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c +index 19a7acb..1a3c7c1 100644 +--- a/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c ++++ b/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c +@@ -1522,6 +1522,9 @@ static uint8_t TrainDQSRdWrPos_D_Fam15(struct MCTStatStruc *pMCTstat, + print_debug_dqs("\t\t\t\tTrainDQSRdWrPos: 143 largest read passing region start ", best_pos, 4); + print_debug_dqs("\t\t\t\tTrainDQSRdWrPos: 144 largest read passing region center (raw hardware value) ", region_center, 4); + } else { ++ /* Restore current settings of other (previously trained) lanes to the active array */ ++ memcpy(current_read_dqs_delay, initial_read_dqs_delay, sizeof(current_read_dqs_delay)); ++ + /* Reprogram the Read DQS Timing Control register with the original settings */ + write_dqs_read_data_timing_registers(initial_read_dqs_delay, dev, dct, dimm, index_reg); + } +@@ -1571,6 +1574,9 @@ static uint8_t TrainDQSRdWrPos_D_Fam15(struct MCTStatStruc *pMCTstat, + print_debug_dqs("\t\t\t\tTrainDQSRdWrPos: 145 largest write passing region ", best_count, 4); + print_debug_dqs("\t\t\t\tTrainDQSRdWrPos: 146 largest write passing region start ", best_pos, 4); + } else { ++ /* Restore current settings of other (previously trained) lanes to the active array */ ++ memcpy(current_write_dqs_delay, initial_write_data_timing, sizeof(current_write_data_delay)); ++ + /* Reprogram the Write DQS Timing Control register with the original settings */ + write_dqs_write_data_timing_registers(current_write_dqs_delay, dev, dct, dimm, index_reg); + } +-- +1.9.1 + diff --git a/resources/libreboot/patch/coreboot/2a3434757ef425dbdfedf1fc69e1a033a6e7310d/grub/kcma-d8/0002-nb-amd-mct_ddr3-Train-correct-receiver-in-TrainDQSRd.patch b/resources/libreboot/patch/coreboot/2a3434757ef425dbdfedf1fc69e1a033a6e7310d/grub/kcma-d8/0002-nb-amd-mct_ddr3-Train-correct-receiver-in-TrainDQSRd.patch new file mode 100644 index 00000000..f866dda8 --- /dev/null +++ b/resources/libreboot/patch/coreboot/2a3434757ef425dbdfedf1fc69e1a033a6e7310d/grub/kcma-d8/0002-nb-amd-mct_ddr3-Train-correct-receiver-in-TrainDQSRd.patch @@ -0,0 +1,35 @@ +From 3119f40c2e0abc36630a92fc5cee58b8d0f9087c Mon Sep 17 00:00:00 2001 +From: Timothy Pearson <tpearson@raptorengineeringinc.com> +Date: Mon, 7 Mar 2016 13:29:24 -0600 +Subject: [PATCH 2/2] nb/amd/mct_ddr3: Train correct receiver in + TrainDQSRdWrPos_D_Fam15 + +Change-Id: Ia26950a8297f0a7125c21e995c89a3fc68d9d8a9 +Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> +--- + src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c | 5 +---- + 1 file changed, 1 insertion(+), 4 deletions(-) + +diff --git a/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c b/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c +index 1a3c7c1..ad81c3d 100644 +--- a/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c ++++ b/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c +@@ -1340,14 +1340,11 @@ static uint8_t TrainDQSRdWrPos_D_Fam15(struct MCTStatStruc *pMCTstat, + + Errors = 0; + dual_rank = 0; +- Receiver = mct_InitReceiver_D(pDCTstat, dct); +- if (receiver_start > Receiver) +- Receiver = receiver_start; + + /* There are four receiver pairs, loosely associated with chipselects. + * This is essentially looping over each rank within each DIMM. + */ +- for (; Receiver < receiver_end; Receiver++) { ++ for (Receiver = receiver_start; Receiver < receiver_end; Receiver++) { + dimm = (Receiver >> 1); + if ((Receiver & 0x1) == 0) { + /* Even rank of DIMM */ +-- +1.9.1 + diff --git a/resources/libreboot/patch/coreboot/2a3434757ef425dbdfedf1fc69e1a033a6e7310d/grub/kcma-d8/0003-HOTFIX-AMD-fam10h-fam15h-don-t-use-microcode-updates.patch b/resources/libreboot/patch/coreboot/2a3434757ef425dbdfedf1fc69e1a033a6e7310d/grub/kcma-d8/0003-HOTFIX-AMD-fam10h-fam15h-don-t-use-microcode-updates.patch new file mode 100644 index 00000000..64278632 --- /dev/null +++ b/resources/libreboot/patch/coreboot/2a3434757ef425dbdfedf1fc69e1a033a6e7310d/grub/kcma-d8/0003-HOTFIX-AMD-fam10h-fam15h-don-t-use-microcode-updates.patch @@ -0,0 +1,89 @@ +From 388f9dbe66f6834013d478eeffe154d59ca6c239 Mon Sep 17 00:00:00 2001 +From: Francis Rowe <info@gluglug.org.uk> +Date: Tue, 8 Mar 2016 07:21:33 +0000 +Subject: [PATCH] HOTFIX: AMD fam10h/fam15h: don't use microcode updates + +There were build issues in libreboot. We don't use microcode updates anyway. +When selecting no microcode updates in menuconfig, build failed because +coreboot for these boards was still trying to add microcode. +--- + src/cpu/Makefile.inc | 34 +------------------------- + src/cpu/amd/family_10h-family_15h/Kconfig | 1 - + src/cpu/amd/family_10h-family_15h/Makefile.inc | 10 -------- + 3 files changed, 1 insertion(+), 44 deletions(-) + +diff --git a/src/cpu/Makefile.inc b/src/cpu/Makefile.inc +index 046c418..ef0e236 100644 +--- a/src/cpu/Makefile.inc ++++ b/src/cpu/Makefile.inc +@@ -17,36 +17,4 @@ $(eval $(call create_class_compiler,cpu_microcode,x86_32)) + ## Rules for building the microcode blob in CBFS + ################################################################################ + +-ifneq ($(CONFIG_CPU_MICROCODE_MULTIPLE_FILES), y) +-cbfs-files-$(CONFIG_CPU_MICROCODE_CBFS_GENERATE) += cpu_microcode_blob.bin +-endif +- +-ifeq ($(CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_HEADER),y) +-cbfs-files-y += cpu_microcode_blob.bin +-cpu_microcode_blob.bin-file = $(objgenerated)/microcode.bin +- +-$(objgenerated)/microcode.bin: +- echo " util/scripts/ucode_h_to_bin.sh $(objgenerated)/microcode.bin \"$(CONFIG_CPU_MICROCODE_HEADER_FILES)\"" +- util/scripts/ucode_h_to_bin.sh $(objgenerated)/microcode.bin $(CONFIG_CPU_MICROCODE_HEADER_FILES) +-endif +- +-# We just mash all microcode binaries together into one binary to rule them all. +-# This approach assumes that the microcode binaries are properly padded, and +-# their headers specify the correct size. This works fairly well on isolatied +-# updates, such as Intel and some AMD microcode, but won't work very well if the +-# updates are wrapped in a container, like AMD's microcode update container. If +-# there is only one microcode binary (i.e. one container), then we don't have +-# this issue, and this rule will continue to work. +-$(obj)/cpu_microcode_blob.bin: $$(cpu_microcode_bins) +- @printf " MICROCODE $(subst $(obj)/,,$(@))\n" +- @echo $(cpu_microcode_bins) +- cat /dev/null $+ > $@ +- +-cpu_microcode_blob.bin-file ?= $(obj)/cpu_microcode_blob.bin +-cpu_microcode_blob.bin-type := microcode +- +-ifneq ($(CONFIG_CPU_MICROCODE_CBFS_LOC),) +-cpu_microcode_blob.bin-position := $(CONFIG_CPU_MICROCODE_CBFS_LOC) +-else +-cpu_microcode_blob.bin-align := 16 +-endif ++# What? Nope! We don't do that in libreboot. +diff --git a/src/cpu/amd/family_10h-family_15h/Kconfig b/src/cpu/amd/family_10h-family_15h/Kconfig +index 14ab1cd..3f873a1 100644 +--- a/src/cpu/amd/family_10h-family_15h/Kconfig ++++ b/src/cpu/amd/family_10h-family_15h/Kconfig +@@ -11,7 +11,6 @@ config CPU_AMD_MODEL_10XXX + select UDELAY_LAPIC + select HAVE_MONOTONIC_TIMER + select SUPPORT_CPU_UCODE_IN_CBFS +- select CPU_MICROCODE_MULTIPLE_FILES + + if CPU_AMD_MODEL_10XXX + +diff --git a/src/cpu/amd/family_10h-family_15h/Makefile.inc b/src/cpu/amd/family_10h-family_15h/Makefile.inc +index f10f732..a295475 100644 +--- a/src/cpu/amd/family_10h-family_15h/Makefile.inc ++++ b/src/cpu/amd/family_10h-family_15h/Makefile.inc +@@ -9,13 +9,3 @@ romstage-y += ram_calc.c + ramstage-y += ram_calc.c + ramstage-y += monotonic_timer.c + ramstage-$(CONFIG_HAVE_ACPI_TABLES) += powernow_acpi.c +- +-# Microcode for Family 10h, 11h, 12h, and 14h +-cbfs-files-$(CONFIG_CPU_MICROCODE_MULTIPLE_FILES) += microcode_amd.bin +-microcode_amd.bin-file := 3rdparty/blobs/cpu/amd/family_10h-family_14h/microcode_amd.bin +-microcode_amd.bin-type := microcode +- +-# Microcode for Family 15h +-cbfs-files-$(CONFIG_CPU_MICROCODE_MULTIPLE_FILES) += microcode_amd_fam15h.bin +-microcode_amd_fam15h.bin-file := 3rdparty/blobs/cpu/amd/family_15h/microcode_amd_fam15h.bin +-microcode_amd_fam15h.bin-type := microcode +-- +1.9.1 + |