path: root/docs/bsd/openbsd.md

How to install LibertyBSD or OpenBSD on a libreboot system
==========================================================

NOTE: This guide was written for OpenBSD by the person who contributed
it, but the libreboot project recommends LibertyBSD. LibertyBSD is a
version of OpenBSD without proprietary software in the repositories
(OpenBSD distributes firmware blobs for devices inside its kernel). Go
to the [LibertyBSD website](http://libertybsd.net/) \-- TODO: test on
LibertyBSD and prioritise that in this guide.

This section relates to preparing, booting and installing OpenBSD on
your libreboot system, using nothing more than a USB flash drive (and
*dd*). They've only been tested on a Lenovo ThinkPad x200.

-   [Prepare the USB drive (in OpenBSD)](#prepare)
-   [Installing OpenBSD without full disk encryption](#noencryption)
-   [Installing OpenBSD with full disk encryption](#encryption)
-   [Booting](#booting)
-   [Configuring Grub](#configuring_grub)
-   [Troubleshooting](#troubleshooting)

[Back to previous index](./)



**This section is only for the GRUB payload. For depthcharge (used on
CrOS devices in libreboot), instructions have yet to be written in the
libreboot documentation.**



install60.fs is the installation image for OpenBSD 6.0. Adapt the
filename accordingly, for a different OpenBSD version or LibertyBSD.

Prepare the USB drive (in LibertyBSD or OpenBSD)
------------------------------------------------

If you downloaded your ISO on a LibertyBSD or OpenBSD system, here is
how to create the bootable LibertyBSD/OpenBSD USB drive:

Connect the USB drive. Check dmesg:\
**\$ dmesg | tail**\
Check to confirm which drive it is, for example, if you think its sd3:\
**\$ disklabel sd3**

Check that it wasn't automatically mounted. If it was, unmount it. For
example:\
**\$ doas umount /dev/sd3i**\

dmesg told you what device it is. Overwrite the drive, writing the
OpenBSD installer to it with dd. For example:\
**\$ doas dd if=install60.fs of=/dev/rsdXc bs=1M; sync**\

You should now be able to boot the installer from your USB drive.
Continue reading, for information about how to do that.

[Back to top of page](#pagetop).

Prepare the USB drive (in NetBSD)
---------------------------------

[This
page](https://wiki.netbsd.org/tutorials/how_to_install_netbsd_from_an_usb_memory_stick/)
on the NetBSD website shows how to create a NetBSD bootable USB drive
from within NetBSD itself. You should use the *dd* method documented
there. This will also work with the OpenBSD image.

Prepare the USB drive (in FreeBSD)
----------------------------------

[This page](https://www.freebsd.org/doc/handbook/bsdinstall-pre.html) on
the FreeBSD website shows how to create a bootable USB drive for
installing FreeBSD. Use the *dd* on that page. You can also use the same
instructions with a OpenBSD ISO image.

Prepare the USB drive (in GNU+Linux)
------------------------------------

If you downloaded your ISO on a GNU+Linux system, here is how to create
the bootable OpenBSD USB drive:

Connect the USB drive. Check dmesg:\
**\$ dmesg**\
Check lsblk to confirm which drive it is:\
**\$ lsblk**

Check that it wasn't automatically mounted. If it was, unmount it. For
example:\
**\$ sudo umount /dev/sdX\***\
**\# umount /dev/sdX\***

dmesg told you what device it is. Overwrite the drive, writing your
distro ISO to it with dd. For example:\
**\$ sudo dd if=install60.fs of=/dev/sdX bs=8M; sync**\
**\# dd if=install60.fs of=/dev/sdX bs=8M; sync**

You should now be able to boot the installer from your USB drive.
Continue reading, for information about how to do that.

[Back to top of page](#pagetop).



Installing OpenBSD without full disk encryption
-----------------------------------------------

Press C in GRUB to access the command line:

grub> **kopenbsd (usb0,openbsd1)/6.0/amd64/bsd.rd**\
grub> **boot**

It will start booting into the OpenBSD installer. Follow the normal
process for installing OpenBSD.

[Back to top of page](#pagetop).



Installing OpenBSD with full disk encryption
--------------------------------------------

Not working. You can modify the above procedure (installation w/o
encryption) to install OpenBSD using full disk encryption, and it
appears to work, except that its not yet clear how to actually *boot* an
OpenBSD+FDE installation using libreboot+Grub2. If you get it working,
please let us know.

If booting in text mode (framebuffer mode might also work), it might be
possible to chainload the OpenBSD or LibertyBSD bootloader from the MBR
section on the internal storage device. This way, it would be possible
to boot with an encrypted OpenBSD or LibertyBSD installation. Please let
us know (contact details are on the libreboot homepage) if you get it
working this way.

Alternatively, it would be good to port OpenBSD either natively as a
coreboot payload, or port it to libpayload (payload library in coreboot;
it has a basic C library and a few functions for certain operations e.g.
text/bitmap). **This would be ideal, because then it would be possible
to boot a truly fully encrypted OpenBSD or LibertyBSD installation, by
putting everything in the flash chip.**

Alternatively, modifying GRUB to support booting fully encrypted OpenBSD
installations would be possible, but probably not feasible; it's an
alien codebase to the OpenBSD project, not tightly integrated and the
OpenBSD bootloader already works.

[Back to top of page](#pagetop).



Booting
-------

Press C in GRUB to access the command line:

grub> **kopenbsd -r sd0a (ahci0,openbsd1)/bsd**\
grub> **boot**

OpenBSD will start booting. Yay!

[Back to top of page](#pagetop).



Configuring Grub
----------------

If you don't want to drop to the GRUB command line and type in a
command to boot OpenBSD every time, you can create a GRUB configuration
that's aware of your OpenBSD installation and that will automatically
be used by libreboot.

On your OpenBSD root partition, create the **/grub** directory and add
the file **libreboot\_grub.cfg** to it. Inside the
**libreboot\_grub.cfg** add these lines:

**default=0 timeout=3 menuentry "OpenBSD" {\
    kopenbsd -r sd0a (ahci0,openbsd1)/bsd\
}\
**

The next time you boot, you'll see the old Grub menu for a few seconds,
then you'll see the a new menu with only OpenBSD on the list. After 3
seconds OpenBSD will boot, or you can hit enter to boot.

[Back to top of page](#pagetop).



Troubleshooting
===============

Most of these issues occur when using libreboot with coreboot's 'text
mode' instead of the coreboot framebuffer. This mode is useful for
booting payloads like memtest86+ which expect text-mode, but for OpenBSD
it can be problematic when they are trying to switch to a framebuffer
because it doesn't exist.

In most cases, you should use the vesafb ROM images. Example filename:
libreboot\_ukdvorak\_vesafb.rom.

won't boot\...something about file not found
---------------------------------------------

Your device names (i.e. usb0, usb1, sd0, sd1, wd0, ahci0, hd0, etc) and
numbers may differ. Use TAB completion.

[Back to top of page](#pagetop).



Copyright © 2016 Scott Bonds <scott@ggr.com>\
Copyright © 2016 Leah Rowe <info@minifree.org>\
Permission is granted to copy, distribute and/or modify this document
under the terms of the Creative Commons Attribution-ShareAlike 4.0
International license or any later version published by Creative
Commons; A copy of the license can be found at
[../cc-by-sa-4.0.txt](../cc-by-sa-4.0.txt)

Updated versions of the license (when available) can be found at
<https://creativecommons.org/licenses/by-sa/4.0/legalcode>

UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE EXTENT
POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS AND
AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND
CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS, IMPLIED, STATUTORY,
OR OTHER. THIS INCLUDES, WITHOUT LIMITATION, WARRANTIES OF TITLE,
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT,
ABSENCE OF LATENT OR OTHER DEFECTS, ACCURACY, OR THE PRESENCE OR ABSENCE
OF ERRORS, WHETHER OR NOT KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF
WARRANTIES ARE NOT ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT
APPLY TO YOU.

TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE TO YOU
ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE) OR
OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL,
PUNITIVE, EXEMPLARY, OR OTHER LOSSES, COSTS, EXPENSES, OR DAMAGES
ARISING OUT OF THIS PUBLIC LICENSE OR USE OF THE LICENSED MATERIAL, EVEN
IF THE LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES,
COSTS, EXPENSES, OR DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT
ALLOWED IN FULL OR IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.

The disclaimer of warranties and limitation of liability provided above
shall be interpreted in a manner that, to the extent possible, most
closely approximates an absolute disclaimer and waiver of all liability.