1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
|
---
title: ASUS KCMA-D8 desktop/workstation board
...
This is a desktop board using AMD hardware (Fam10h **and Fam15h** CPUs
available). It can also be used for building a high-powered workstation.
Powered by libreboot. The coreboot port was done by Timothy Pearson of
Raptor Engineering Inc. and, working with them, merged into libreboot.
**Memory initialization is still problematic, for some modules. We
recommend avoiding Kingston modules.**
Flashing instructions can be found at
[../install/\#flashrom](../install/#flashrom) - note that external
flashing is required (e.g. BBB), if the proprietary (ASUS) firmware is
currently installed. If you already have libreboot, by default it is
possible to re-flash using software running in GNU+Linux on the kcma-d8,
without using external hardware.
CPU compatibility
=================
**Use Opteron 4200 series (works without microcode updates, including hw
virt).** 4300 series needs microcode updates, so avoid those CPUs. 4100
series is too old, and mostly untested.
Board status (compatibility) {#boardstatus}
============================
See <https://raptorengineeringinc.com/coreboot/kcma-d8-status.php>.
Form factor {#formfactor}
===========
These boards use the SSI EEB 3.61 form factor; make sure that your case
supports this. This form factor is similar to E-ATX in that the size is
identical, but the position of the screws are different.
IPMI iKVM module add-on {#ipmi}
=======================
Don't use it. It uses proprietary firmware and adds a backdoor (remote
out-of-band management chip, similar to the [Intel Management
Engine](../../faq.md#intelme). Fortunately, the firmware is
unsigned (possibly to replace) and physically separate from the
mainboard since it's on the add-on module, which you don't have to
install.
Flash chips {#flashchips}
===========
2MiB flash chips are included by default, on these boards. It's on a
P-DIP 8 slot (SPI chip). The flash chip can be upgraded to higher sizes:
4MiB, 8MiB or 16MiB. With at least 8MiB, you could feasibly fit a
compressed linux+initramfs image (BusyBox+Linux system) into CBFS and
boot that, loading it into memory.
Libreboot has configs for 2, 4, 8 and 16 MiB flash chip sizes (default
flash chip is 2MiB).
**DO NOT hot-swap the chip with your bare hands. Use a P-DIP 8 chip
extractor. These can be found online. See
<http://www.coreboot.org/Developer_Manual/Tools#Chip_removal_tools>**
Native graphics initialization {#graphics}
==============================
Only text-mode is known to work, but linux(kernel) can initialize the
framebuffer display (if it has KMS - kernel mode setting).
Current issues {#issues}
==============
- LRDIMM memory modules are currently incompatible
- SAS (via PIKE 2008 module) requires non-free option ROM (and
SeaBIOS) to boot from it (theoretically possible to replace, but you
can put a kernel in CBFS or on SATA and use that to boot GNU, which
can be on a SAS drive. The linux kernel can use those SAS drives
(via PIKE module) without an option ROM).
- IPMI iKVM module (optional add-on card) uses proprietary firmware.
Since it's for remote out-of-band management, it's theoretically a
backdoor similar to the Intel Management Engine. Fortunately, unlike
the ME, this firmware is unsigned which means that a free
replacement is theoretically possible. For now, the libreboot
project recommends not installing the module. [This
project](https://github.com/facebook/openbmc) might be interesting
to derive from, for those who want to work on a free replacement. In
practise, out-of-band management isn't very useful anyway (or at
the very least, it's not a major inconvenience to not have it).
- Graphics: only text-mode works. See [\#graphics](#graphics)
Hardware specifications {#specifications}
-----------------------
Check the ASUS website.
Copyright © 2016 Leah Rowe <info@minifree.org>\
This page is available under the [CC BY SA 4.0](../cc-by-sa-4.0.txt)
|
