blob: a46ad458cd8e5b11f0f6e5734791eb69cd6c1520 (
plain) (
blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
|
% KGPE-D16 external flashing instructions
Initial flashing instructions for KGPE-D16.
This guide is for those who want libreboot on their ASUS KGPE-D16
motherboard, while they still have the proprietary ASUS BIOS present.
This guide can also be followed (adapted) if you brick you board, to
know how to recover.
**Memory initialization is still problematic, for some modules. We
recommend avoiding Kingston modules.**
For more general information about this board, refer to
[../hcl/kgpe-d16.html](../hcl/kgpe-d16.html).
TODO: show photos here, and other info.
- [KGPE-D16 boards (and full systems) with libreboot
preinstalled](#preinstall)
- [External programmer](#programmer)
KGPE-D16 boards (and full systems) with libreboot preinstalled {#preinstall}
==============================================================
If you don't want to install libreboot yourself, companies exist that
sell these boards with libreboot pre-installed, along with a free
GNU+Linux distribution.
Check the [suppliers](../../suppliers) page for more information.
External programmer {#programmer}
===================
Refer to [bbb\_setup.html](bbb_setup.html) for a guide on how to set up
an external SPI programmer.
The flash chip is in a PDIP 8 socket (SPI flash chip) on the
motherboard, which you take out and then re-flash with libreboot, using
the programmer. **DO NOT** remove the chip with your hands. Use a chip
extractor tool.
Copyright © 2015 Leah Rowe <info@minifree.org>\
This page is available under the [CC BY SA 4.0](../cc-by-sa-4.0.txt)
|
