1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
|
From 9f702a6ac2a4106d3e1f88a27f61052ad4b99925 Mon Sep 17 00:00:00 2001
From: Timothy Pearson <tpearson@raptorengineeringinc.com>
Date: Sat, 20 Jun 2015 21:31:15 -0500
Subject: [PATCH 065/143] southbridge/amd/sb700: Do drive detection even in
AHCI mode
SeaBIOS AHCI drive detection randomly fails for drives present
on the secondary channel of each AHCI SATA BAR. Forcing native
drive detection in AHCI mode resolves this issue.
Change-Id: I34eb1d5d3f2f8aefb749a4eeb911c1373d184938
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
---
src/southbridge/amd/sb700/sata.c | 99 ++++++++++++++++++++------------------
1 file changed, 53 insertions(+), 46 deletions(-)
diff --git a/src/southbridge/amd/sb700/sata.c b/src/southbridge/amd/sb700/sata.c
index b09ae73..24f78dd 100644
--- a/src/southbridge/amd/sb700/sata.c
+++ b/src/southbridge/amd/sb700/sata.c
@@ -301,65 +301,72 @@ static void sata_init(struct device *dev)
if (port_count > max_port_count)
port_count = max_port_count;
- if (!sata_ahci_mode) {
- /* RPR7.7 SATA drive detection. */
- /* Use BAR5+0x128,BAR0 for Primary Slave */
- /* Use BAR5+0x1A8,BAR0 for Primary Slave */
- /* Use BAR5+0x228,BAR2 for Secondary Master */
- /* Use BAR5+0x2A8,BAR2 for Secondary Slave */
- /* Use BAR5+0x328,PATA_BAR0/2 for Primary/Secondary Master emulation */
- /* Use BAR5+0x3A8,PATA_BAR0/2 for Primary/Secondary Slave emulation */
- for (i = 0; i < port_count; i++) {
+ /* RPR7.7 SATA drive detection. */
+ /* Use BAR5+0x128,BAR0 for Primary Slave */
+ /* Use BAR5+0x1A8,BAR0 for Primary Slave */
+ /* Use BAR5+0x228,BAR2 for Secondary Master */
+ /* Use BAR5+0x2A8,BAR2 for Secondary Slave */
+ /* Use BAR5+0x328,PATA_BAR0/2 for Primary/Secondary Master emulation */
+ /* Use BAR5+0x3A8,PATA_BAR0/2 for Primary/Secondary Slave emulation */
+ for (i = 0; i < port_count; i++) {
+ byte = read8(sata_bar5 + 0x128 + 0x80 * i);
+ printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte);
+ byte &= 0xF;
+ if (byte == 0x1) {
+ /* If the drive status is 0x1 then we see it but we aren't talking to it. */
+ /* Try to do something about it. */
+ printk(BIOS_SPEW, "SATA device detected but not talking. Trying lower speed.\n");
+
+ /* Read in Port-N Serial ATA Control Register */
+ byte = read8(sata_bar5 + 0x12C + 0x80 * i);
+
+ /* Set Reset Bit and 1.5g bit */
+ byte |= 0x11;
+ write8((sata_bar5 + 0x12C + 0x80 * i), byte);
+
+ /* Wait 1ms */
+ mdelay(1);
+
+ /* Clear Reset Bit */
+ byte &= ~0x01;
+ write8((sata_bar5 + 0x12C + 0x80 * i), byte);
+
+ /* Wait 1ms */
+ mdelay(1);
+
+ /* Reread status */
byte = read8(sata_bar5 + 0x128 + 0x80 * i);
printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte);
byte &= 0xF;
- if (byte == 0x1) {
- /* If the drive status is 0x1 then we see it but we aren't talking to it. */
- /* Try to do something about it. */
- printk(BIOS_SPEW, "SATA device detected but not talking. Trying lower speed.\n");
-
- /* Read in Port-N Serial ATA Control Register */
- byte = read8(sata_bar5 + 0x12C + 0x80 * i);
-
- /* Set Reset Bit and 1.5g bit */
- byte |= 0x11;
- write8((sata_bar5 + 0x12C + 0x80 * i), byte);
-
- /* Wait 1ms */
- mdelay(1);
-
- /* Clear Reset Bit */
- byte &= ~0x01;
- write8((sata_bar5 + 0x12C + 0x80 * i), byte);
-
- /* Wait 1ms */
- mdelay(1);
+ }
- /* Reread status */
- byte = read8(sata_bar5 + 0x128 + 0x80 * i);
- printk(BIOS_SPEW, "SATA port %i status = %x\n", i, byte);
- byte &= 0xF;
+ if (byte == 0x3) {
+ for (j = 0; j < 10; j++) {
+ if (i < 4)
+ current_bar = ((i / 2) == 0) ? sata_bar0 : sata_bar2;
+ else
+ current_bar = ide_bar0;
+ if (!sata_drive_detect(i, current_bar))
+ break;
}
-
- if (byte == 0x3) {
- for (j = 0; j < 10; j++) {
- if (i < 4)
- current_bar = ((i / 2) == 0) ? sata_bar0 : sata_bar2;
- else
- current_bar = ide_bar0;
- if (!sata_drive_detect(i, current_bar))
- break;
- }
+ if (sata_ahci_mode)
+ printk(BIOS_DEBUG, "AHCI device %d is %sready after %i tries\n",
+ i,
+ (j == 10) ? "not " : "",
+ (j == 10) ? j : j + 1);
+ else
printk(BIOS_DEBUG, "%s %s device is %sready after %i tries\n",
(i / 2) ? "Secondary" : "Primary",
(i % 2 ) ? "Slave" : "Master",
(j == 10) ? "not " : "",
(j == 10) ? j : j + 1);
- } else {
+ } else {
+ if (sata_ahci_mode)
+ printk(BIOS_DEBUG, "No AHCI SATA drive on Slot%i\n", i);
+ else
printk(BIOS_DEBUG, "No %s %s SATA drive on Slot%i\n",
(i / 2) ? "Secondary" : "Primary",
(i % 2 ) ? "Slave" : "Master", i);
- }
}
}
--
1.7.9.5
|
