ThinkPad X200 support added to libreboot

1 files changed, 45 insertions, 2 deletions

diff --git a/docs/git/index.html b/docs/git/index.html
index 5aa38b4b..c3286b9b 100644
--- a/docs/git/index.html
+++ b/docs/git/index.html
@@ -33,6 +33,7 @@
 					<li><a href="#config_x60">ThinkPad X60</a></li>
 					<li><a href="#config_x60t">ThinkPad X60 Tablet</a></li>
 					<li><a href="#config_t60">ThinkPad T60</a></li>
+					<li><a href="#config_x200">ThinkPad X200</a></li>
 					<li><a href="#config_macbook21">MacBook2,1</a></li>
 				</ul>
 			</li>
@@ -384,6 +385,48 @@
 				It is believed that the motherboards on 14.1&quot; and 15.1&quot; T60's are the same, so the same configuration is used
 				on both the 14.1&quot; and 15.1&quot; T60's.
 			</p>
+			
+		<h2 id="config_x200">
+			ThinkPad X200 configuration (file: resources/libreboot/config/x200_4mb/config and resources/libreboot/config/x200_8mb/config)
+		</h2>
+			<p>
+				These are saved as two configs, because there are 2 size flash chips: 4MB or 8MB. 
+			</p>
+			<ul>
+				<li>General / Expert mode = <i>enable</i></li>
+				<li>Mainboard / Mainboard vendor = <i>Lenovo</i></li>
+				<li>Mainboard / Mainboard model = <i>ThinkPad X200</i></li>
+				<li>Mainboard / ROM chip size = <i>4096 KB (4 MB)</i> or <i>8192 KB (8 MB)</i> depending on flash chip size</li>
+				<li>Chipset / Include CPU microcode in CBFS = <i>Do not include microcode updates</i></li>
+				<li>Chipset / Size of CBFS filesystem in ROM = byte size <i>0x7FD000</i> (for 8MB flash chip) or <i>3FD000</i> (for 4MB flash chip)</li>
+				<li>Devices / Use native graphics initialization = <i>enable</i></li>
+				<li>
+					Display / Keep VESA framebuffer = <i>disable</i> (disable for text-mode graphics, enable for coreboot vesa framebuffer)
+					<ul>
+						<li>Libreboot provides this with text-mode enabled by default, but it automatically patches a copy of the config at build time
+						to enable coreboot framebuffer for a separate set of ROM images, in each machine.</li>
+					</ul>
+				</li>
+				<li>Generic Drivers / USB 2.0 EHCI debug dongle support = <i>Enable</i></li>
+				<li>Generic Drivers / Enable early (pre-RAM) usbdebug = <i>Enable</i></li>
+				<li>Generic Drivers / Type of dongle = <i>BeagleBone Black</i></li>
+				<li>Console / Send console output to a CBMEM buffer = <i>enable</i></li>
+				<li>Console / USB dongle log output = <i>enable</i></li>
+				<li>Payload / Add a payload = <i>An ELF executable payload</i></li>
+				<li>Payload / Payload path and filename = <i>grub.elf</i></li>
+			</ul>
+			<p>
+				Go back and disable option ROM's:
+			</p>
+			<ul>
+				<li>Devices / Run VGA Option ROMs = <i>disable</i></li>
+				<li>Devices / Run Option ROMs on PCI devices = <i>disable</i></li>
+			</ul>
+			<p>
+				The resulting .config file was saved as resources/libreboot/config/<b>x200_8mb/config</b> and
+				resources/libreboot/config/<b>x200_4mb/config</b> and is used by the build
+				scripts for this machine.
+			</p>
 
 		<h2 id="config_macbook21">
 			MacBook2,1 configuration (file: resources/libreboot/config/macbook21/config)
@@ -475,11 +518,11 @@
 
 			<p>
 				If you are building on an i686 host, this will include statically linked 32-bit binaries in the binary release archive that you created,
-				for: <b>nvramtool, cbfstool, bucts, flashrom</b>.
+				for: <b>nvramtool, cbfstool, bucts, flashrom, ich9deblob</b>.
 			</p>
 
 			<p>
-				If you are building on an x86_64 host, this will include statically linked 32- and 64-bit binaries for <b>cbfstool</b> and <b>nvramtool</b>, while <b>flashrom</b>
+				If you are building on an x86_64 host, this will include statically linked 32- and 64-bit binaries for <b>ich9deblob</b>, <b>cbfstool</b> and <b>nvramtool</b>, while <b>flashrom</b>
 				and <b>bucts</b> will be included only as 64-bit statically linked binaries. <b>To include a statically linked flashrom and bucts for i686, you
 				will need to build them on a chroot, a virtual machine or a real 32-bit system. You can find the build dependencies for these packages listed in deps-*</b>
 			</p>