aboutsummaryrefslogtreecommitdiff
path: root/docs/install
diff options
context:
space:
mode:
authorSebastian 'Swift Geek' Grzywna <swiftgeek@gmail.com>2018-03-20 19:45:38 +0100
committerSebastian 'Swift Geek' Grzywna <swiftgeek@gmail.com>2018-03-20 20:01:24 +0100
commit81c76feaebe09c382e0fbfd42e358fc6710d47eb (patch)
tree95d156498ce001a5966101015cae7453d48d556a /docs/install
parentc3aefd82ce5e458aed30419e58d55e60d33fa2ad (diff)
downloadlibrebootfr-81c76feaebe09c382e0fbfd42e358fc6710d47eb.tar.gz
librebootfr-81c76feaebe09c382e0fbfd42e358fc6710d47eb.zip
Remove explody bits from guide
Diffstat (limited to 'docs/install')
-rw-r--r--docs/install/rpi_setup.md8
1 files changed, 4 insertions, 4 deletions
diff --git a/docs/install/rpi_setup.md b/docs/install/rpi_setup.md
index e74432d4..e46191e7 100644
--- a/docs/install/rpi_setup.md
+++ b/docs/install/rpi_setup.md
@@ -283,10 +283,10 @@ your PI.
Power on your Pi, and run the following. Ensure you swap out
"your\_chip\_name" with the proper name/model of your chip. Check that
it can be read successfully. If you cannot read the chip and receive an
-error similar to "no EEPROM Detected" or "0x0 Chip detected" then
-you may want to try powering off your PI, and switching the two pins
-which are connected to the IO ports. I.E. Connect pins (clip)8 to (pi)19
-and pins (clip)15 to (pi)21
+error similar to "no EEPROM Detected" then
+you may want to make sure that MISO/MOSI are not swapped around, check
+with multimeter whether voltage is right and that ground is connected
+between "programmer" and target.
pi# cd ~/flashrom