aboutsummaryrefslogtreecommitdiff
path: root/docs
diff options
context:
space:
mode:
authorSebastian 'Swift Geek' Grzywna <swiftgeek@gmail.com>2018-05-09 19:20:15 +0200
committerSebastian 'Swift Geek' Grzywna <swiftgeek@gmail.com>2018-05-09 19:49:16 +0200
commite87f326a7fe2f3493a28f4e25d207f4d05f7c050 (patch)
treeb67f8b9780f5516ae76515f98e3a657929aa21c8 /docs
parentfdc116438fe0dfb98af483fd5ee7e1127b170def (diff)
downloadlibrebootfr-e87f326a7fe2f3493a28f4e25d207f4d05f7c050.tar.gz
librebootfr-e87f326a7fe2f3493a28f4e25d207f4d05f7c050.zip
c201.md: fix WP screw description
It cannot be pulled low because that would enable #WP So I assume it's pulled up weakly on motherboard with some resistor
Diffstat (limited to 'docs')
-rw-r--r--docs/install/c201.md2
1 files changed, 1 insertions, 1 deletions
diff --git a/docs/install/c201.md b/docs/install/c201.md
index 238c0734..3045b062 100644
--- a/docs/install/c201.md
+++ b/docs/install/c201.md
@@ -155,7 +155,7 @@ to be opened.
The SPI flash is located next to the write protect screw. Its layout is
indicated in the picture below. Note that it is not necessary to connect
-`WP#` since removing the screw already connects it to ground. Before
+`WP#` since after removing the screw it is pulled up weakly to 3v3. Before
writing to the chip externally, the battery connector has to be
detached. It is located under the heat spreader, that has to be
unscrewed from the rest of the case. The battery connector is located on