blob: 0abd8d0677acae0085c0136057ca8ad63c2f09ce (
plain) (
blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
|
diff -rupN memtest86+-5.01_/config.h memtest86+-5.01/config.h
--- memtest86+-5.01_/config.h 2014-06-25 22:57:47.893476783 +0100
+++ memtest86+-5.01/config.h 2014-06-25 22:59:01.269840630 +0100
@@ -17,7 +17,7 @@
#define CONSERVATIVE_SMP 1
/* BEEP_MODE - Beep on error. Default off, Change to 1 to enable */
-#define BEEP_MODE 0
+#define BEEP_MODE 1
/* BEEP_END_NO_ERROR - Beep at end of each pass without error. Default off, Change to 1 to enable */
#define BEEP_END_NO_ERROR 0
@@ -29,13 +29,13 @@
/* SERIAL_CONSOLE_DEFAULT - The default state of the serial console. */
/* This is normally off since it slows down testing. Change to a 1 */
/* to enable. */
-#define SERIAL_CONSOLE_DEFAULT 0
+#define SERIAL_CONSOLE_DEFAULT 1
/* SERIAL_TTY - The default serial port to use. 0=ttyS0, 1=ttyS1 */
#define SERIAL_TTY 0
/* SERIAL_BAUD_RATE - Baud rate for the serial console */
-#define SERIAL_BAUD_RATE 9600
+#define SERIAL_BAUD_RATE 115200
/* SCRN_DEBUG - extra check for SCREEN_BUFFER
*/
diff -rupN memtest86+-5.01_/Makefile memtest86+-5.01/Makefile
--- memtest86+-5.01_/Makefile 2014-06-25 22:57:47.893476783 +0100
+++ memtest86+-5.01/Makefile 2014-06-25 22:59:19.237929751 +0100
@@ -21,7 +21,7 @@ OBJS= head.o reloc.o main.o test.o init.
all: clean memtest.bin memtest
- scp memtest.bin root@192.168.0.12:/srv/tftp/mt86plus
+# scp memtest.bin root@192.168.0.12:/srv/tftp/mt86plus
# Link it statically once so I know I don't have undefined
# symbols and then link it dynamically so I have full
|
